Finally the future research suggestion is given for the fuzzy temperature control.
最后对模糊控制给出了进一步研究的建议。
The fuzzy control method has the strong robustness, can precisely control in the vehicle the temperature, satisfies the human body comfortable request.
模糊控制方法具有较强的鲁棒性,能较为精确地控制车内温度,满足人体舒适性的要求。
The result shows that this system with fuzzy control could control the electronics temperature effectively.
结果表明此主动热控系统能对航天器电子设备温度进行有效控制。
A modified fuzzy controller structure which has faster response and higher accuracy is used to control the temperature and the pressure of the furnace.
在炉温和炉压控制回路中,采用了经过改进的模糊控制器,得到了较快的响应特性和较精确的温度、压力控制效果。
A fuzzy controller for the greenhouse is designed, and the fuzzy control system of the greenhouse temperature is built up.
设计出模糊控制器,并建立温室温度的模糊控制系统。
A fuzzy controller with integral parameter is designed, and applies it to the temperature control system of resistance furnace.
设计了一种带有积分参数的模糊控制器,并将其应用于电阻炉的温度控制系统。
This paper presents temperature of control system based on FUZZY-PI for the production of compound fertilizer.
本文根据复合肥制造工艺要求,提出了一套基于FUZZY - PI的温度控制系统。
A research shows that switch time fuzzy control not only improves control accuracy of temperature, but also simplifies control rule.
研究表明,开关时间模糊控制不仅提高了温度的控制精度,而且简化了控制规则。
The design of an expert fuzzy control system which applies expert system theory and fuzzy control theory to temperature control process is described.
将专家系统和模糊控制的理论应用到温度控制过程中,介绍了这类专家模糊控制系统的设计方法。
This paper introduces an example of PLC in fuzzy control Temperature control of steel plate anneal furnace.
本文介绍了P LC在模糊控制中的一个实例,即钢板退火炉的炉温控制。
Expert fuzzy control is used on temperature and negative pressure control and a safe and economic result can be obtained.
对温度和负压采用专家模糊控制,既能保证系统的安全性,又能提高经济性。
We adopt a rule of three steps fuzzy control system applying to temperature control of vacuum sintering furnace.
采用了一种三段规则的模糊控制策略,对真空烧结炉的温度进行控制。
A study is made on control of temperature system based on Fuzzy self-tuning PID parameters.
对基于模糊pid参数自整定的温度系统控制方法进行了研究。
According to the problem of temperature control of glue-making tank-reactor, a new fuzzy control way is presented.
针对人造板厂制胶反应釜的温度控制问题,提出了一种新的模糊控制方法。
In the temperature control module, a two-phase fuzzy controller is adopted to enhance the system response speed and the temperature control precision.
在温度控制模块中,采用分阶段模糊控制的方法提高了系统的响应速度和控制精度。
It separates the complicated incubation controlling system into heating fuzzy and adding wet fuzzy controlling system so that the fuzzy control of temperature and humility can be achieved.
将复杂的孵化控制系统分解成加温模糊控制系统和加湿模糊控制系统,实现了温度、湿度的模糊控制。
The ameliorated fuzzy logic controller is implemented in the temperature control of industrial stove.
经过优化的模糊控制器实施了对工业电阻炉的炉温控制。
Lastly the adaptive fuzzy control method proposed in the paper is applied to control the superheat steam temperature of the boiler, and the practical control effect is satisfactory.
论文最后将文中的自适应模糊控制方法应用到锅炉过热蒸汽温度控制中,取得了良好的控制效果。
The fuzzy control of temperature in process of carbon fibre producing is discussed in this thesis. Further more, the process of design of fuzzy controller is described in detail.
本文论述了碳纤维生产过程中对温度进行模糊控制的思想,并详细地描述了模糊控制器的设计过程。
Aiming at the characteristics of large delay, great inertia, strong coupling and time varying in the control system of tobacco leaf fermenting temperature, a fuzzy control system is put forward.
针对烟叶发酵温度控制系统的大滞后、大惯性、强耦合、时变的特点,提出了一种烟叶发酵温度的模糊控制系统。
This paper introduces the design of the fuzzy control node of temperature in greenhouse based on a MCS196 Micro - computer and the component of the greenhouse control system.
介绍了一种利用MCS196单片处理机实现的温室温度模糊控制节点的设计及温室控制系统的组成。
In this paper, we present the model of fuzzy controller and fuzzy control algorithm, which is used to the system of temperature control and the result is effective for control.
提出了模糊控制器的模型和模糊算法,并把它应用到温度控制系统中去,得到了良好的控制效果。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY-PID 控制系统,对陶瓷工业窑炉的温度进行控制。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY -PID控制系统,对陶瓷工业窑炉的温度进行控制。
Controllers adopt agricultural expert control strategy and fuzzy control technique, so it can adjust temperature and humidity accurately.
控制器将农艺专家控制方案和模糊控制技术相结合,实现温室的温度、湿度的精确控制。
In addition, the temperature control is made more precise and flexible due to the adoption of the hide-in temperature detector and temperature control algorithm based on the fuzzy expert system.
同时,采用内藏式温度传感器和基于模糊专家系统的温度控制算法,使腐蚀系统的温度控制更加精确、灵活。
This article mainly introduces how to use the fuzzy control algorithm to precisely control the change speed of temperature in temperature control box.
文章主要介绍了如何用模糊控制算法实现对温控箱内温度变化速度的精确控制。
In order to obtain precise temperature adjustment and satisfy the requirement of plastic injection, a single chip with fuzzy control to realize an advanced temperature controlling.
采用单片机和模糊控制实现对注塑机的料桶温度控制,以达到精密注塑的温度要求。
The paper also studies the fuzzy PI control to achieve the control of greenhouse temperature by uniting the PI and fuzzy control.
同时结合PI和模糊控制,研究了模糊pi控制的两种方法,来实现温室温度的控制。
The paper also studies the fuzzy PI control to achieve the control of greenhouse temperature by uniting the PI and fuzzy control.
同时结合PI和模糊控制,研究了模糊pi控制的两种方法,来实现温室温度的控制。
应用推荐