Fuzzy control technology is an efficient measure to control the electronic hydraulic servo system.
模糊控制是对液压伺服系统控制的有效手段。
A new control system based on fuzzy control technology for sawdust collecting device was designed.
设计了一种新型的气力收集控制系统，采用模糊控制策略。
Therefore, I will introduce the fuzzy control technology to air-conditioning compressor frequency control.
空调压缩机是空调器的核心部件。
Fuzzy controller designed according fuzzy control technology and practical experience is used to control room temperature.
本控制系统根据模糊控制技术和实际经验，采用模糊控制器以控制房间温度。
The majority of powers are transformed the heat energy to consume. At present the fuzzy control technology has been stable.
转速越慢，效率越低，大部分功率被转换成热能而消耗掉，造成较大的成本费用。
But building the fuzzy rules is hard, and the ability of self-adapting and self-study are poor in the fuzzy control technology.
但由于模糊控制技术本身存在着建立模糊规则比较困难，自适应能力和自学习能力差等缺点。
Moreover, the problem of disturbance resistance is resolved by an intelligent method of making policy combine with fuzzy control technology.
同时利用智能决策和模糊控制技术解决抗干扰问题及增强系统的鲁棒性。
Fuzzy control technology was applied to design a two-input and three-output self - (adapting) fuzzy PID controller to control the water level of boilers.
文章应用模糊控制技术，设计一种二输入三输出自适应模糊pid控制器，对锅炉水位进行控制。
The method combines fuzzy control technology with PID algorithm and applies the multi mode control to design a control system of temperature and humidity.
该方法把模糊控制技术和PID算法结合起来，采用多模态分段控制设计出温湿度控制系统。
Micro-computer fuzzy control technology is adopted, so that water supply, ice making, dehydration, full-ice auto-stop, etc. , are automatically controlled.
采用微电脑模糊控制技术，进水，制冰，脱水，冰满停机等过程全部自动控制。
In this paper, a servo control system is designed based on fuzzy control technology, and then a fuzzy control algorithm with parameter adaptation is presented.
本文提出了一种基于模糊控制技术的伺服控制系统，并设计了尺度变换比例因子自适应调节的模糊控制算法。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY-PID 控制系统，对陶瓷工业窑炉的温度进行控制。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY -PID控制系统，对陶瓷工业窑炉的温度进行控制。
Then, by researching on fuzzy control technology, the paper designs ordinary fuzzy controller, fuzzy-PID dual-mode controller and fuzzy self-tuning PID controller.
然后，采用了模糊控制技术，分别设计了普通模糊控制器、模糊-PID双模控制器及模糊自整定PID控制器。
Combining neural network technology with fuzzy control technology, taking the closed loop control method, the system can control the delivery of the material flow automatically.
该系统将人工智能中的神经网络控制技术和模糊控制技术结合，采用闭环控制方式，实现对带式输送机物料流量的智能自动控制。
Fuzzy reasoning is the mathematical kernel of the flourish development of fuzzy control technology, type-2 fuzzy sets are the research foundation of the type-2 fuzzy logic system.
模糊推理是蓬勃发展中的模糊控制技术的数学核心，二型模糊集的模糊推理是研究二型模糊逻辑系统的基础。
Combining with the Virtual Instrument technology and Fuzzy control technology. it developed a metering heating measurement and control system based on Virtual Instrument technology.
同时结合虚拟仪器技术和模糊控制技术，开发了一套基于虚拟仪器技术的计量供热测控系统。
And adopting the method in which including periodical detecting and local detecting of gap discharge state, the servo feed control-system based on fuzzy control technology was designed.
在此基础上，采用控制周期总体间隙状况和局部短路的伺服控制策略，建立了基于模糊控制技术的回转式电火花展成加工伺服进给控制系统。
The paper is to organically combine the time series analysis method and neural network technology in the fuzzy control technology and fractal theory to predict mine gas emission quantity.
将模糊控制技术、分形理论中的时间序列分析方法与神经网络技术有机地结合起来，并运用于矿井瓦斯涌出量的预测中。
The gray model forecasting theory and fuzzy control technology are introduced, and a new method based on gray model forecasting and fuzzy control of coal-feed in a jig is proposed in the paper.
本文对灰色预测理论及模糊控制技术进行了介绍，并提出了一种对跳汰机给煤量进行灰色预测和模糊控制的新方法。
The system application fuzzy control technology, controls the soft start and the power balance of the belt conveyer, enhanced the belt conveyer performance characteristic and the automated level.
系统应用模糊控制技术，控制带式输送机的软启动和功率平衡，提高了带式输送机的运行性能和自动化水平。
Fuzzy technology is applied, and control strategy and parameters' definition are described in detail.
在控制研究中，应用模糊控制技术，详细分析了它的控制策略和控制量的确定。
Variable power displacement; Fuzzy reasoning; Judgment of running state; Identification of driver's intention; Control technology; Application.
变工作排量；模糊推理；行驶工况判断；驾驶员意图识别；控制技术；应用。
Described are the application of the fuzzy control theory and intellectual analysis technology in the train brake charging process and in the analysis of the brake troubles in Fuyang Depot.
介绍了模糊控制理论与智能分析技术在阜阳车辆段研制的列车制动充风过程中以及在制动机故障分析中的应用情况。
This system senses the amount of rainfall by the infrared rain sensor, and adjusts the speed of wiper based on the fuzzy control algorithm and pulse width modulation technology.
该系统通过红外雨量传感器检测雨量大小，使用模糊控制算法和脉宽调制技术调节雨刷器的速度；给出了系统的总体结构和具体设计方法。
A method of how to use MATLAB Engine interface technology to add Fuzzy control in the Open CNC system based on the motion controller is introduced in this paper.
论文阐述了在基于运动控制卡的开放式数控系统中如何利用MA TLAB引擎接口技术来加入模糊控制的方法。
Fuzzy control hardwares have been designed using AC frequency conversion technology for household refrigerators.
设计了具有交流变频技术的家用电冰箱模糊控制器硬件。
At last, a The Sliding Mode Fuzzy control algorithm is implemented on FPGA, utilizing synchronous design technology and modular design method.
最后采用同步设计技术和模块化设计的方法在FPGA上实现了滑模模糊控制算法。
Fuzzy operation knowledge of steering situation is obtained through stand test and computer emulation. It gives technology support for steering control of fuzzy gear shift control system.
通过台架试验和计算机仿真，获得转向工况下的模糊操作知识，为模糊换挡控制系统的转向控制提供技术支持。
Fuzzy operation knowledge of steering situation is obtained through stand test and computer emulation. It gives technology support for steering control of fuzzy gear shift control system.
通过台架试验和计算机仿真，获得转向工况下的模糊操作知识，为模糊换挡控制系统的转向控制提供技术支持。
应用推荐