The fuzzy control rule for the calculation of quantization gain factor is given.
确立了计算量化增益因子的模糊控制规则；
The self-optimizing method of the fuzzy control rule model has been presented finally.
最后给出模糊控制规则模型自寻优优化方法。
According to the fuzzy control rule and the input, the output connection request carries on the design to the software.
根据模糊控制规则及输入、输出的接口要求对软件进行设计。
A fuzzy controller for capacitor voltage at DC side is designed by using fuzzy control rule with self-adjusting factors.
采用带有自调整因子的模糊控制规则设计了有源滤波器直流侧电压的模糊控制器。
An adjustable fuzzy controller of which the fuzzy control rule table can be obtained by numerical calculation is designed.
设计了一种在线可调整的模糊控制器，其模糊控制规则表可以用解析的方法进行计算。
The control quantity was gained by looking up the table of fuzzy control rule, and formed PWM to control Wire-feeder device.
控制量通过查询模糊控制规则表得到，并生成pwm控制送丝电机。
In this method the self-adjusting integrator is adopted together with basic fuzzy control, according to the fuzzy control rule and practical experience.
该方法根据模糊控制规则和实际工程经验，在基本模糊控制的基础上增加了一个系数自整定积分器。
Then with an industrial furnace as controlled object, fuzzy control rule is obtained and fuzzy self adaptive control is realized by on line identifying fuzzy model.
并以工业电炉为控制对象，通过在线辨识模糊模型获得模糊控制规则，实现了模糊自适应控制。
A fuzzy controller of nuclear power plant pressurizer is researched and designed tentatively by defining fuzzy set, membership function and fuzzy control rule properly.
通过合理地确定模糊集、隶属度函数和模糊控制规则等，初步研究和设计了核电站稳压器的模糊控制器。
Methods Using the fuzzy control rule of accurate estimated intersection delay to control intersection signal lamp will reduce the time vehicle delay on intersection effectively.
方法通过对车辆在交叉口延误时间的估算，制订模糊控制规则来控制交叉口的信号灯，能有效地减少车辆在交叉口的延误时间。
To improve the riding comfort and handling safety of a vehicle, an adjustable fuzzy control algorithm, whose fuzzy control rule table can be obtained with the numerical calculation.
以车辆操纵稳定性及行驶平顺性为控制目标，提出一种在线可调整的模糊控制算法，其模糊控制规则表可以用解析方法得到。
Based on the conventional direct torque control system, the adjusting of magnetic linkage and torque both adopt fuzzy control strategy and fuzzy control rule is generated in an analytic way.
在传统的直接转矩系统的基础上，磁链和转矩的调节均采用模糊控制策略，且模糊控制规则解析生成。
Some classical queue control algorithms can not insure the QoS for high level applications. Aiming at this problem, this paper proposes a queue control algorithm based on fuzzy control rule.
一些经典网络队列控制算法无法确保高优先级用户应用的服务质量，针对该问题提出基于模糊控制规则的队列控制方法。
Fuzzy Neural Network combined with conventional PD controller is used for the kinematics control and a fuzzy rule extraction method is put forward.
采用模糊神经网络结合常规PD控制器的方法来进行机器人的运动控制，提出了提取模糊规则的方法。
The fuzzy control based on the control rule described by the fuzzy language, has been successfully used in the industry control process and has an extensive foreground of application.
基于模糊语言控制规则描述的模糊控制，已成功地用于工业过程控制并具有广泛的应用前景。
The fuzzy control which is based on the control rule described by the fuzzy language, has been successfully used in the industry control process and has the extensive foreground of application.
基于模糊语言控制规则描述的模糊控制，已成功地用于工业过程控制并具有广泛的应用前景。
Therefore, the automatic determination of the fuzzy rule and in-process adaptation of membership function are required for the advanced welding process control.
因此，模糊规则集的自动生成及隶属度函数的在线调整对于现代焊接过程控制来说是迫切需要的。
A research shows that switch time fuzzy control not only improves control accuracy of temperature, but also simplifies control rule.
研究表明，开关时间模糊控制不仅提高了温度的控制精度，而且简化了控制规则。
The rule of fuzzy control and output expression as well as the practical results are given.
给出了模糊控制规则和输出表达式，以及它的应用实践效果。
On Basis of on fuzzy model that has been set up, the design of fuzzy controller and the rule of control have been finished.
建立了被控对象的模糊模型，在模糊模型的基础上，完成了模糊控制器的设计、模糊控制规则的建立。
We adopt a rule of three steps fuzzy control system applying to temperature control of vacuum sintering furnace.
采用了一种三段规则的模糊控制策略，对真空烧结炉的温度进行控制。
This paper adopts a fuzzy rule self-adjust control method to the need of industrial constant temperature control.
本论文提出了一种控制规则自调整模糊控制器的设计方案。
Taking the thermodynamic system of radiator testing stand as a controlled object, studies the fuzzy control process of rule self-tuning for supply air temperature in air circulation systems.
提出了一种模糊控制规则实时校正算法，并以散热器实验台热工系统为被控对象，研究了风循环系统送风温度的规则自校正模糊控制过程。
Parameters selection in fuzzy PID control rule is analyzed and a discussion for the control results is carried out.
对模糊pid控制规律中参数的选择进行了分析，并对控制结果进行了讨论。
Control rule self-seeking-optimization fuzzy algorithm is used in the system.
算法采用控制规则自寻优模糊算法。
At last, control performance of optimized control rule and membership function are compared with that of PID and traditional fuzzy control system.
并利用寻优获得的隶属函数和控制规则与PID算法、常规模糊控制算法控制同一被控对象的响应结果进行了对比分析。
The obstacle avoidance is detailed based on ultrasonic sensors rule of fuzzy control and courses of defuzzification, and the experimental result is produced.
介绍了超声避障系统的模糊控制规则和非模糊化，并给出了实验结果。
The composition of the fuzzy controller and the control method of the fuzzy, fuzzy rule and reasoning, and back fuzzy were given.
给出了模糊滑模控制器的构成，以及模糊化、模糊规则与推理、反模糊化处理的方法。
In the coding process, scale factor, fuzzy-control rule and Subordination function are integrated to code in order to complete integral optimizing.
编码过程中对比例因子、模糊控制规则和隶属度函数进行了统一编码，实现了多个因数的整体寻优。
In the coding process, scale factor, fuzzy-control rule and Subordination function are integrated to code in order to complete integral optimizing.
编码过程中对比例因子、模糊控制规则和隶属度函数进行了统一编码，实现了多个因数的整体寻优。
应用推荐