The fuzzy control of temperature in process of carbon fibre producing is discussed in this thesis. Further more, the process of design of fuzzy controller is described in detail.
本文论述了碳纤维生产过程中对温度进行模糊控制的思想，并详细地描述了模糊控制器的设计过程。
It separates the complicated incubation controlling system into heating fuzzy and adding wet fuzzy controlling system so that the fuzzy control of temperature and humility can be achieved.
将复杂的孵化控制系统分解成加温模糊控制系统和加湿模糊控制系统，实现了温度、湿度的模糊控制。
A modified fuzzy controller structure which has faster response and higher accuracy is used to control the temperature and the pressure of the furnace.
在炉温和炉压控制回路中，采用了经过改进的模糊控制器，得到了较快的响应特性和较精确的温度、压力控制效果。
A fuzzy controller for the greenhouse is designed, and the fuzzy control system of the greenhouse temperature is built up.
设计出模糊控制器，并建立温室温度的模糊控制系统。
A fuzzy controller with integral parameter is designed, and applies it to the temperature control system of resistance furnace.
设计了一种带有积分参数的模糊控制器，并将其应用于电阻炉的温度控制系统。
A research shows that switch time fuzzy control not only improves control accuracy of temperature, but also simplifies control rule.
研究表明，开关时间模糊控制不仅提高了温度的控制精度，而且简化了控制规则。
The design of an expert fuzzy control system which applies expert system theory and fuzzy control theory to temperature control process is described.
将专家系统和模糊控制的理论应用到温度控制过程中，介绍了这类专家模糊控制系统的设计方法。
This paper introduces an example of PLC in fuzzy control Temperature control of steel plate anneal furnace.
本文介绍了P LC在模糊控制中的一个实例，即钢板退火炉的炉温控制。
Aiming at the coke oven temperature characteristics of great inertia, pure time-delay, non-linear and time changeable, a fuzzy compound control method is proposed.
针对焦炉温度的大惯性、纯滞后、非线性和时变性等特点，提出了一种新的模糊复合控制方法。
We adopt a rule of three steps fuzzy control system applying to temperature control of vacuum sintering furnace.
采用了一种三段规则的模糊控制策略，对真空烧结炉的温度进行控制。
A study is made on control of temperature system based on Fuzzy self-tuning PID parameters.
对基于模糊pid参数自整定的温度系统控制方法进行了研究。
The ameliorated fuzzy logic controller is implemented in the temperature control of industrial stove.
经过优化的模糊控制器实施了对工业电阻炉的炉温控制。
Lastly the adaptive fuzzy control method proposed in the paper is applied to control the superheat steam temperature of the boiler, and the practical control effect is satisfactory.
论文最后将文中的自适应模糊控制方法应用到锅炉过热蒸汽温度控制中，取得了良好的控制效果。
Research methods:This paper uses two levels fuzzy controllers to respectively control two parameters of air volume and air temperature.
研究方法：采用两级模糊控制器，分别控制风量和风温两个被控参数。
In addition, the temperature control is made more precise and flexible due to the adoption of the hide-in temperature detector and temperature control algorithm based on the fuzzy expert system.
同时，采用内藏式温度传感器和基于模糊专家系统的温度控制算法，使腐蚀系统的温度控制更加精确、灵活。
In this paper, we present the model of fuzzy controller and fuzzy control algorithm, which is used to the system of temperature control and the result is effective for control.
提出了模糊控制器的模型和模糊算法，并把它应用到温度控制系统中去，得到了良好的控制效果。
Taking the thermodynamic system of radiator testing stand as a controlled object, studies the fuzzy control process of rule self-tuning for supply air temperature in air circulation systems.
提出了一种模糊控制规则实时校正算法，并以散热器实验台热工系统为被控对象，研究了风循环系统送风温度的规则自校正模糊控制过程。
This article mainly introduces how to use the fuzzy control algorithm to precisely control the change speed of temperature in temperature control box.
文章主要介绍了如何用模糊控制算法实现对温控箱内温度变化速度的精确控制。
Aiming at the characteristics of large delay, great inertia, strong coupling and time varying in the control system of tobacco leaf fermenting temperature, a fuzzy control system is put forward.
针对烟叶发酵温度控制系统的大滞后、大惯性、强耦合、时变的特点，提出了一种烟叶发酵温度的模糊控制系统。
In order to obtain precise temperature adjustment and satisfy the requirement of plastic injection, a single chip with fuzzy control to realize an advanced temperature controlling.
采用单片机和模糊控制实现对注塑机的料桶温度控制，以达到精密注塑的温度要求。
A fuzzy and PID control method is presented for characteristics of boilers temperature control system.
针对热水锅炉温度控制的特点，采用模糊pid控制策略。
This paper introduces the design of the fuzzy control node of temperature in greenhouse based on a MCS196 Micro - computer and the component of the greenhouse control system.
介绍了一种利用MCS196单片处理机实现的温室温度模糊控制节点的设计及温室控制系统的组成。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY-PID 控制系统，对陶瓷工业窑炉的温度进行控制。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY -PID控制系统，对陶瓷工业窑炉的温度进行控制。
The paper also studies the fuzzy PI control to achieve the control of greenhouse temperature by uniting the PI and fuzzy control.
同时结合PI和模糊控制，研究了模糊pi控制的两种方法，来实现温室温度的控制。
On the principle of PID, the control method of fuzzy PID is discussesed in saving electric energy, the effect of dust collecting, wind mixing and spraying for temperature reducing.
在对除尘器风机实行PID变频调速的基础上，为节约电能，提高除尘效果，提出混风降温、喷雾降温的模糊PID控制思想及策略。
The set-up of a fuzzy controller of temperature and its realization in microcomputer process control were described in detail in this paper.
文中叙述了温度模糊控制器的建立过程及在微机自控系统中的实现方法。
This paper introduces a temperature fuzzy control system of electric furnace. The basic theory design method and experimental results of fuzzy controller are described.
本文介绍了微机模糊控温系统。阐述了模糊控制器的原理与设计。给出了实验结果和结论。
The control strategy for developing the intelligent fuzzy integrated PID parameters obviously improves the precision of temperature control.
开发适合真空钎焊炉温度控制特点的智能模糊整定PID参数的控制方案，明显地改善了温度控制的精确性。
The control strategy for developing the intelligent fuzzy integrated PID parameters obviously improves the precision of temperature control.
开发适合真空钎焊炉温度控制特点的智能模糊整定PID参数的控制方案，明显地改善了温度控制的精确性。
应用推荐