In this paper, the information integrated system for fuze design, with four layers structures, is studied and presented.
提出并分析引信设计库及相关信息资源集成系统的四层结构模型：支撑层、网络层、系统集成层和工作应用层。
The difference between a fuze circuit and general circuit is discussed according to the features of the fuze circuit. And the idea of fuze design reliability is given.
针对引信电路的特点，提出了电路失效与一般产品的差别和评价的重点及设计可靠性的概念。
The initiating point may be lagged when traditional angle-fixed fuze heads off TBM. Although it can be solved if the fuze beam is pitched, the fuze design difficulty will increase.
传统侧视引信拦截弹道导弹时，存在炸点可能滞后的问题，虽然采用波束前倾的方法可以解决这一问题，但增加了引信的设计难度。
The principles and requirements of establishing the assessment index system of fuze design for producibility are advanced. An assessment index tree of fuze DFP is given and analyzed in detail.
提出了引信DF P评价指标体系建立的原则和要求，给出了引信DF P评价指标树，并较详细地对其进行了分析。
In this paper, according to the strict real time requirement of the signal processing of a fuze, the application of the single chip digital signal processor (DSP) in the fuze design is explored.
针对引信信号处理严格的实时性要求，本文讨论了用单片数字信号处理器(DSP)进行引信信号快速处理设计的应用问题。
By analyzing the requirement of fuze software reliability, fuze software reliability design methods, fuze software reliability basic and detail design criterions are summarized in this paper.
通过对引信软件可靠性的需求分析，总结了引信软件的可靠性设计方法、引信软件可靠性的基本设计准则和详细设计准则。
The significance and prospect of the application of redundancy design in fuze safety systems is discussed.
论述了冗余设计技术在引信安全系统中应用的重要意义和前景。
This theory and method will be universally available to the design of fuze system.
这种理论和方法对引信系统的设计具有普遍意义。
At the last, the author design the GUI of CW fuze to convenient for the engineering application.
最后，为了便于工程应用，作者又对连续波多普勒引信设计了图形用户界面。
In this paper, the method that how to design electronic time fuze system by use of MPU technique and EEPROM technique is mainly researched.
本论文主要研究了利用微处理器技术、串行EEPROM存储器技术等设计电子时间引信系统的方案。
The results obtained in this paper have positive effect on fuze EMC design.
其研究结果对引信电磁兼容性设计具有一定的积极作用。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
It is proved that the circuit design can perfectly resolve the early explosion of PD fuze.
结果表明，这种是电路设计可以较好地解决PD引信防早炸问题。
The general structure of fuze, the design of relating circuit and the existing problems are discussed in this paper.
并对引信的总体结构、有关电路的设计及其存在问题进行了探讨。
The design of detecting electrodes in a capacitance fuze is a critically important factor that determines its sensitivity.
电容近炸引信探测电极的设计，对确定引信灵敏度至关重要。
Aim to study how large scale system theory can be applied to the design of fuze system.
目的研究大系统理论在引信系统设计中的应用。
According to the requirements of basic shape fuze and the standards of fuze safety design, an effective way to realize the delay arming of small-caliber fuze was researched.
根据基型引信要求和引信安全性设计准则，探索实现小口径引信延期解除保险的有效途径。
It is suitable in the design of general fuze zig-zag devices and has a guiding significance when analysing accidents caused by misfiring of fuzes.
该原则适用于一般曲折槽式保险机构的设计，对于引信瞎火事故分析具有普遍指导意义。
In order to research on theory of fuze ball rotor deeply, and guidance the design for engineering better, mathematical model of the rotating motion, spin eccentricity, numeric.
为了深入研究球转子理论，从而更好地指导工程设计，对其转正运动的数学模型、旋转偏心、数学模型的数值分析和球转子实验等方面进行了研究。
This paper briefly describes the principle and design method and application and prospect of ci. In addition, the situation and countermeasures of ci in the fuze profession are also presented.
精练的阐述了CI原理与设计方法，应用及其前景，并对引信行业CI现状和对策进行阐述。
The result indicates that the damage effect of penetration submunition equipping the programmable electron time fuze meet the design requirement of undamaged areas of aerodrome runway.
结果表明，由配用可编程电子时间引信的侵彻子弹毁伤效果满足跑道未受损面积设计要求。
On the basis of analysing the shortcomings in our DCM design of one dimension trajectory correction fuze, this paper brings forward the guidelines of improved design, and designs the actual DCM .
在深入分析一维弹道修正引信三圆片阻尼修正机构（DCM）设计中不足的基础上，提出DCM改进设计的指导思想并进行了具体的改进设计，新设计的DCM克服了原DCM中的问题。
The schemes suitable for use in fuze safety systems is proposed by comparing several different redundancy design methods.
分析对比了几种不同的冗余设计方法，提出了适合引信安全系统特点的冗余设计方案。
This provides a theoretical basis for the engineering design of fuze dielectric rod antennas.
为引信介质天线的工程设计提供了依据。
Filter performance has a significant effect on ranging accuracy of frequency modulation fuze. It is difficult to design high-performance filter directly, and it has poor real-time property.
滤波器性能对调频定距引信测距精度有重要影响，直接设计高性能滤波器实现困难且实时性差。
And the design requirements of the muzzle safe distance of the projectile fuze are concerned with not only the power of the projectile, but also its muzzle velocity.
炮弹引信炮口保险距离设计指标不但与弹丸威力有关，还涉及弹丸初速。
Combining the design of remote setting fuze, the dissertation presents the concrete means and measure to realize high over loading, small bulk, low cost and low consumption.
文中结合遥控装定引信电路设计，给出了实现抗高过载、小体积、低成本和低功耗的具体方法和措施。
Combining the design of remote setting fuze, the dissertation presents the concrete means and measure to realize high over loading, small bulk, low cost and low consumption.
文中结合遥控装定引信电路设计，给出了实现抗高过载、小体积、低成本和低功耗的具体方法和措施。
应用推荐