For example, many lumbar spinal fusion patients have sacroiliac joint pain due to reduced motion in lumbar spine segments.
例如，许多腰椎融合病人会出现骶髂关节疼痛，因为腰椎节段的活动减少。
The exposure allows for decortication of the pars, facet joint, and transverse processes for bone-grafting and fusion.
暴露过程中可对峡部、关节突关节和横突皮质剥除以便进行植骨融合。
A joint data association and bias estimation method is proposed to handle the negative effect of individual radar bias to track association and fusion in radar networks for target tracking.
针对雷达组网目标跟踪系统中，单雷达系统偏差严重影响多雷达航迹数据关联及融合跟踪质量的问题，提出了一种联合数据关联与系统偏差估计的方法。
Firstly, the optimal fusion rule is analyzed when the joint PDF is known.
首先分析了在联合概率密度已知情况下的最优融合规则。
Aiming at the distributed damage detection system of huge complex structure, maximum joint probability (MJP) methodology was proposed for decision fusion associated with many damage detection methods.
针对大型复杂结构分布式损伤检测系统中的多种损伤检测方法的检测结果融合问题，提出了最大联合概率(mjp)决策融合法。
The joint which is connected by welding method is called the welding joint, which is composed of welding seam, fusion zone, heat affected zone and its adjacent base metal.
用焊接方法连接的接头称为焊接接头，它由焊缝、熔合区、热影响区及其邻近的母材组成。
Combination dish medium mercury represent thought fusion or lack of joint of ideas.
组合盘中的水星代表着思想的交汇融合或缺乏想法。
A new view of characteristic zone of fusion welding joint is put forward through observations and researches of many fusion welding joints.
通过大量的熔化焊接头试样的观察和研究，提出了熔化焊接头特征区域划分新方案。
This paper proposes a motion fusion method without manual intervention, suggests a way to identify the motion cycle based on joint movement.
介绍了一种不需要人工干预的运动融合方法，提出了基于关节运动规律的运动周期判别方法。
Its pathological process can come down to enthesitis, bone erosion and syndesmophyte formation, syndesmophyte formation cause joint fusion stiffness and ultimately lead to disability.
其关节病理变化过程可以归结为附着点炎、骨侵蚀、骨赘形成三个阶段，骨赘形成致关节融合强直最终导致残疾。
None of them had infection or disunion of joint fusion.
无伤口感染及关节融合不愈合。
The joint-venture enterprise is a fusion of capital, technical, commodity and management. And It is a collision, conflict, fusion and absorb of the culture too.
合资企业既是资本、技术、商品、管理的融合，也是东西方两种文化的碰撞、冲突、融合与吸收。
The main region of invalidation of the weld joint between different steels is commonly in fusion zone during welding or serving.
异种钢焊接接头在焊接时或使用期间，发生失效的主要区域通常在熔合区。
The technology of joint target tracking and classification (JTC) is one of the fast emerging research focuses in the field of information fusion.
联合目标跟踪与分类(JTC)技术是信息融合领域新兴的一个研究方向。
Electro-fusion is widely used in joint of polyethylene pipe, of which quality is very important to piping system.
聚乙烯管连接中大量使用电熔接头，其质量的好坏直接影响管道系统的安全。
The appearence characteristics of the heterogenous mixture zone near the bottom of weld metal in the fusion welded joint are studied through metallographic observations of many fusion welded joints.
通过时大量熔化焊接头的金相观察，研究了熔化焊接头焊缝底部附近“不均匀混合区”的形貌特征。
Summary of Background Data. Fusion procedures have been associated with adjacent level morbidities and facet joint pathologies in a considerable number of patients.
在大量的患者中，融合术已经与临近节段退变和关节突关节病理改变相关联。
To a lesser extent, lack of fusion at the bottom of the joint was observed also.
在一定程度上接头上熔接不好的缺陷也观测到了。
These conclusions are important theory to guide the study of the formation mechanism of cold cracking in the two sides of fusion line of dissimilar steel welded joint.
所得结论、对研究异种钢接头熔合线两侧的冷裂纹的形成机理有其理论指导作用。
Crystallinity, hardness, tensile strength and impact toughness of fusion welding joint of polyethylene pipes are tested and analyzed.
测试和分析了聚乙烯管道热熔对接焊接头的结晶度、硬度、拉伸性能和冲击性能，并与基材的性能进行了比较。
Impact strength of fusion butt welding joint of polyethylene pipes was tested with a digital impact tester, and some actual fusion welding cases were commented.
应用仪器化冲击试验机对聚乙烯热熔对接焊的冲击性能进行了测试，并对几种实际焊接情况进行了分析。
Consequently, pitting corrosion resistance of the welded joint declines obviously and pitting preferentially occurs at ferrite phase in the high temperature HAZ near the fusion line.
焊接接头的耐点蚀性能明显下降，点蚀优先发生在高温热影响区所在的铁素体晶粒内。
A new view of characteristic zone of fusion welding joint is put forward through observations and researches of many fusion welding joints.
本文研究了已提出的几种熔焊接头特征区域划分方案，找出认识一致和认识分歧之处，并对认识分歧的原因进行了详细讨论。
This paper researches several kinds of proposed classification methods of characteristic zones about fusion welded joint.
通过大量的熔化焊接头试样的观察和研究，提出了熔化焊接头特征区域划分新方案。
Heater leak occurs by direct reason of the stress corrosion cracking, while by other reasons of solidification cracking, small fusion depth of welding joint and non...
应力腐蚀裂纹是造成加热器泄漏的直接原因，结晶裂纹、焊缝熔深小及坡口底部未熔透也是加热器泄漏的原因。
Heater leak occurs by direct reason of the stress corrosion cracking, while by other reasons of solidification cracking, small fusion depth of welding joint and non...
应力腐蚀裂纹是造成加热器泄漏的直接原因，结晶裂纹、焊缝熔深小及坡口底部未熔透也是加热器泄漏的原因。
应用推荐