The extension of the predictive model to cover more severe fire tests, such as the hydrocarbon furnace test, will require less testing as confidence in the predictive model grows.
将预测模型用于更为苛刻的燃烧试验（例如烃类燃烧炉试验），随着预测模型置信度的增加所需的试验会更少。
Test data obtained with an experimental dropping tube furnace are applied to the numerical analogy calculation of pulverized coal combustion.
作者将管式沉降炉试验数据应用到煤粉燃烧数值模拟计算。
By remaking now available glow ion nitrogen furnace and technological test, the range of ion nitrogen is enlarged, the questions of oxide and being out of shape are solved.
通过改造现有辉光离子氮化炉及工艺试验，扩大离子氮化的氮化范围，解决离子氮化后的氧化及变形问题。
It has been proved through test that porous honeycomb ceramics could be used as transducer of radiation energy in flame furnace so as to realize the purpose of energy-saving.
通过试验证明，多孔蜂窝陶瓷作为辐射能变换体应用在火焰炉中可实现节能的目的。其原理在于构成蜂窝陶瓷的空腔辐射特性。
Will break it if you don't have a hammer, every furnace burning it, every stone roller crush it, it still have what use? He should be able to withstand all the test strengths and qualities.
如果没一锤都会打断它，每一个熔炉都会烧毁它，每一个碾子都会粉碎它，那它还有什么用呢？他应该具有能经受住一切考验的优点和品质。
A method is presented to deduce steam temperature deviation alcmg flue's width at the outlet of each platen in convection superheaters and reheaters by making use of furnace model test results.
本文提出了用炉内模化试验结果推算对流过热器和对流再热器沿烟造宽度各片出口汽温偏差的一种方法。
LCD test fixture, had tin furnace jig, zebra paper processing hot TAB.
LCD测试夹具，过锡炉治具，热压加工斑马纸tab。
It introduces the test of smelting SiCaBa alloy in calcium carbide furnace, and focuses on the effects of some burden ratios and charging styles to the alloy's composition.
介绍了在电石炉上改炼硅钡钙的试验情况，着重阐述了几种配比及加料方式对合金成分的影响。
The test of LF-80 deoxidizer on ladle furnace is analyzed, which shows that it can replace aluminum shot and calcium carbide from deoxidization result.
本文主要对LF- 80脱氧剂在包钢钢包炉上的试验情况进行了总结。从试验结果看，其完全可以替代铝粒和电石的脱氧效果。
Smelting test showed that an alloy contained 20% Cr can be produced by shaft furnace with carbon bearing chrome-ore pellets.
热态试验表明，竖炉用含碳铬矿球团可以冶炼出含铬20%的铬铁合金。
The issue introduces the performance of blast furnace slag and test results of dry-mixed mortar mixed with the BF slag as fine aggregate.
介绍了高炉干渣的基本性能和将其作为细集料用于干粉砂浆的试验结果。
The simulating test of fluidization process in the pellet shaft furnace was related.
阐述了球团竖炉流化过程的模拟试验；
The verification test was carried out in a vacuum silicothermic reducing furnace to obtain the condensed lithium metal.
设计真空硅热还原炉进行了验证试验，得到冷凝金属锂。
The hot test of the copper cooling stave with circular channels was done in the test furnace designed by the authors.
在自行研制的热态试验炉上对圆孔型铜冷却壁进行了热模拟试验。
Adopting biological wastes as reburning fuel to reduce NO in simulated gas, hot test has been carried out in a small dropper tube furnace.
在小型滴管炉内进行了采用生物质废弃物作为再燃燃料还原模拟烟气中NO的热态试验。
Six laboratories were organized to test and verify the method that determination the beryllium in water and wastewater by graph furnace atomic absorption spectrophotometry.
组织全国六个实验室对石墨炉原子吸收法测定水和废水中的铍进行方法验证。
The bell-type furnace from SOLO Switzerland has been made in China successfully, the different tests in its performance, process examination and production test of typical parts were carried out.
针对采用瑞士SOLO工业炉技术生产的国产底装料立式多用炉，进行了性能测试、工艺试验和典型件生产试验。
Industrial test has been conducted 34 heats in a LFV 40 ladle furnace at Wuxi steelworks.
在无锡钢厂LFV—40型钢包炉上进行34炉工业性试验，提出了该钢包炉合理的吹氩制度。
Through orthogonal test, we work out the solution by selecting rational electric regulation and adjusting burden in submerged arc furnace, thus, the production can be operated smoothly.
通过正交实验并选择合适的供电制度及调整矿热炉用料结构等技术措施，找到了解决问题的方法，从而可以使生产正常进行。
An introduction was made on the test methods for loading testing of the electric furnace transformer with large capacity under incomplete test conditions.
介绍了在试验条件有欠缺的条件下，对较大容量电炉变压器进行负载测试的试验方法和试验数据的误差消除方法。
Thermal shock test in vacuum was done under modelling melting conditions, the coating could resistant to one time thermal shock in vacuum furnace and was in integrity.
在模拟熔炼条件下，对涂层进行了真空热震试验，涂层均能经受一次真空热震而涂层完好。
After reaching the temperature of the furnace, maintain the test piece at that temperature for not less than 10 min.
达到熔炉的温度后，将测试条保持放在熔炉里至少10分钟。
Smelting test showed that an alloy contained 20% Cr can be produced by shaft furnace wit...
热态试验表明，竖炉用含碳铬矿球团可以冶炼出含铬20%的铬铁合金。
The paper introduces the integrative test of opening anode baking furnace in detail, analyzes the calculation results of baking furnace material and heat balance and proposes optimum methods.
介绍了敞开式环型焙烧炉的综合性测试工作，并且对焙烧炉物料平衡计算和热平衡计算的结果进行了分析，提出了优化措施。
Smelting test showed that an alloy contained 20% Cr can be produced by shaft furnace with carbon bearing c...
热态试验表明，竖炉用含碳铬矿球团可以冶炼出含铬20%的铬铁合金。
The resistance furnace, widely used in material fatigue test and destructive testing, can be used with the supporting the use of the testing machine.
本电阻炉广泛适用于材料的疲劳试验及破坏性试验，可配合试验机配套使用。
The application of test method for a baking furnace is very valuable for the diagnosis of baking operation in aluminum industry.
测试方法的运用对于今后焙烧炉的优化运行测试诊断也是一种十分有益的尝试。
The essay introduces the research status, the design principle, the composition and the test of the CCD-based imaging and monitoring system in the raceway of blast furnace.
介绍了高炉风口CCD成像监测系统的研究现状、设计原理、系统组成和系统测试。
Through the cold-state model test of a high-capacity boiler obtained is the flow field distribution within the boiler and at the furnace outlet horizontal gas pass.
通过大型电站锅炉的冷态模拟试验获得了炉内和炉膛出口水平烟道流场的分布规律。
Through the cold-state model test of a high-capacity boiler obtained is the flow field distribution within the boiler and at the furnace outlet horizontal gas pass.
通过大型电站锅炉的冷态模拟试验获得了炉内和炉膛出口水平烟道流场的分布规律。
应用推荐