All control equipment should be located in the furnace control room.
所有的控制设备都应当装在窑炉控制室里。
The paper introduces the nickel smelting blast furnace control system.
介绍了某镍冶炼厂鼓风炉控制系统。
Introduces the modification plan of HTM furnace control system based on PLC.
介绍了基于PLC技术的热媒炉控制系统的改造方案。
This paper introduces hydraulic jet-pipe control technique by combining blast furnace control.
结合高炉控制，介绍了液压射流管控制技术。
Hoist the main blast furnace control system is the guarantee for the normal production of one of the key equipment.
主卷扬控制系统是保证高炉正常连续生产的关键设备之一。
This paper introduces the required basic functions of intermittent gas making furnace control program and points to be alert.
介绍制作较完善的间歇造气炉控制程序应具有的基本功能，制作中某些应注意的细节。
Abstract: the traditional heating furnace control system is based on some model, it is difficult to guarantee the demand of heating process.
摘要：传统的加热炉控制系统大多建立在一定的模型基础上，难以保证加热工艺要求。
It is necessary for re-heating furnace control model to adapt and optimize in order to satisfy the requirement of hot strip rolling production.
为了满足热轧生产的需求，加热炉模型控制需要不断的适应和优化。
A sort of relatively novel electric furnace control is introduced. The circuit is terse, the work is trust-worthy and the control is of high precision.
介绍一种较新颖的电炉温控系统，电路简洁，工作可靠，控温精度高。
Main problems of previous HTM furnace control system in polyester plant are simply analysed. It is given that hardware configuration and software design of modification plan.
简要分析了聚酯装置热媒炉原控制系统存在的问题，给出了改造方案的硬件配置和软件设计内容。
This paper is mainly discuss the design about PLC temperature control system of box heat-treatment furnace.
本文主要讨论了以可编程控制器为核心的箱式热处理炉温度控制系统的设计。
To introduce the technology reform of oil burning open fire furnace. The heat treatment control principle of the open fire furnace and its adopting measures are introduced emphatically.
介绍燃油明火加热炉的技术改造，着重介绍明火加热炉热工控制的原理以及采取的措施。
A modified fuzzy controller structure which has faster response and higher accuracy is used to control the temperature and the pressure of the furnace.
在炉温和炉压控制回路中，采用了经过改进的模糊控制器，得到了较快的响应特性和较精确的温度、压力控制效果。
The intelligent PID control makes the practical furnace temperature curve well meet with standard ISO834.
采用智能PID控制则使炉膛的实际升温曲线符合ISO 834国际标准升温要求。
Since the property requirements are so special, tool steel are usually melted in electric furnace using careful metallurgical quality control.
由于需要的性质是如此特别，工具钢通常使用冶金质量控制的方法在电炉中熔化。
It is concluded that to reduce temperature from furnace, shorten time in furnace and control atmosphere in furnace are the key points.
得出结论：降低出炉温度、缩短在炉时间及控制了炉内气氛是关键。
We develop a fringing state space model used in the continuous annealing furnace computer optimization control.
本文开发了一个用于连续退火炉计算机优化控制的离散状态空间模型。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.
再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟踪操作记录，同时通过冶金模型进行生产过程优化。
The multi-firing mode capability allows for use of a single control amplifier and for common spare parts in multi-furnace facilities.
多模式功能允许发射放大器使用一个单一的控制和多炉共同备件设施。
This text introduced a kind of with digital signal processor DSP for core of electric resistance furnace temperature control system.
本文介绍了一种以数字信号处理器DSP为核心的电阻炉温度控制系统。
And the successful application in the resistance furnace temperature control system is obtained.
并在电阻加热炉温度控制系统中获得了成功应用。
This paper was designed to 8098 microcontroller as the core gas furnace temperature control system, it can achieve data collection, data and alarm pretreatment.
本文设计了以8098单片机为核心的煤气加热炉温度控制系统，它可实现数据采集、数据显示以及报警预处理。
Silicon furnace automation control systems, with the advanced international level.
单晶硅炉的自动化控制系统，具有国际先进水平。
This paper introduces one kind of furnace pressure control strategy based on SYMPHONY system.
介绍了一种采用SYMPHONY系统实现的炉膛压力控制策略。
The accurate control of the work pieces temperature in vacuum annealing furnace is a typical nonlinear large time delay and cross coupling complicated problem.
而在真空退火的生产过程中，退火工件温度的精确控制是一个典型的非线性、大时滞、强耦合的复杂控制问题。
An introduction of applying multi-media technique to heat treating furnace computer control system is expounded. The composition of multi-media system hardware and software are recommended.
介绍了多媒体技术在热处理炉微机控制系统中的应用以及热处理炉多媒体硬件的组成和软件系统。
An introduction of applying multi-media technique to heat treating furnace computer control system is expounded. The composition of multi-media system hardware and software are recommended.
介绍了多媒体技术在热处理炉微机控制系统中的应用以及热处理炉多媒体硬件的组成和软件系统。
应用推荐