That could mean firing the laser 10 times a second, at fuel pellets that are shot mid air as they are dropped into the fusion chamber.
这也许意味着，激光器每秒就可以发射10次，而且可以在半空击中落入聚变室的氢同位素靶丸。
This air is guided and diffused by static blades to allow for easier ignition when it mixed with fuel and ignited in a combustion chamber.
静止叶片引导空气进入并加以整流，使其在燃烧室内更易于与燃气混合并点燃。
"We burn the fuel with very high efficiency in the chamber," he says.
“我们的燃料在舱内的燃烧效率非常高”，他说。
A chamber, such as the furnace of a steam locomotive, in which fuel is burned.
火箱，燃烧室一种燃料在里面燃烧的内室，例如蒸汽机车的燃烧室。
The combustion chamber is hot enough to completely vaporize the fuel, providing better combustion and reducing emissions.
燃烧室温度不断上升，使燃油变成蒸气，改善了燃烧也降低了排放。
We inject a quantity of fuel in to the combustion chamber, ignite it and create a single explosion.
我们注入的燃料数量到燃烧室，点燃，并建立一个单一的爆炸。
This information permits accurate, professional diagnosis of the spark plugs, plug wires, ignition system, fuel control and most other factors affecting the spark plug voltage and combustion chamber.
这方面的资料证准确，专业诊断的火花塞，电线插头，点火系统，燃油控制和大多数其他的影响因素火花塞电压和燃烧室。
The fuel cell and scrubber are located in a thermostatically controlled and insulated chamber.
燃料电池和气体洗涤器置于一个恒温控制的和绝热的室内。
Carburetors for automobile engines usually contained a storage chamber for liquid fuel, a choke, an idling jet, a main jet, an airflow restriction, and an accelerator pump.
汽车发动机用的化油器的组成通常包括燃油室、阻风门、怠速量孔、主量孔、空气节流喉管和加速泵。
COMBUSTION CHAMBER, a part of an engine for burning fuel in the air supplied by the compressor.
燃烧室，发动机的一部分。用来使燃油和压气机所提供的空气相混合而燃烧。
The internal combustion engine is a heat engine in which the burning of a fuel occurs in a confined space called a combustion chamber.
内燃机是一种热机，燃料在其被称为燃烧室的密封空间内燃烧。
The fuel control unit supplies and regulates the fuel to the combustion chamber.
燃油控制组件对进入燃烧室的燃油进行调节。
In the long-term operation of atmospheric and vacuum heat furnace that use vacuum heavy oil as fuel, thesurface of nailhead furnace tube in the convection chamber was seriously deposited.
以减压渣油为燃料的常减压加热炉在长期生产运行过程中，对流室钉头炉管表面结垢严重。
Increasing the pressure of the fuel mixture in the combustion chamber before ignition helps to increase the power of an engine. This is done by compressing the fuel mixture to a smaller volume.
在点火前增加燃烧室内可燃混合气的压力有助于提高发动机的功率，这是通过把可燃混合气压缩到一个极小的体积来实现的。
The results of the investigation show that soot appears firstly in the rich fuel area where is permeated by air within combustion chamber.
研究结果表明：在柴油机燃烧过程中碳粒最早出现在燃烧室内有空气渗混的富油区；
In the model the exit area ratio, solid particle mass ratio, fuel enthalpy of combustion, jet gas molecular weight, chamber stagnation temperature, flight Math number etc. have been considered.
在该模型中考虑了底排出口面积比，排气固相颗粒质量比，燃料热值，燃气分子量，燃烧室总温，飞行马赫数等因素。
The article discussed improving all kinds of methods to improve temperature uniformity of chamber furnace, pit furnace, salt bath furnace, fuel furnace.
本文主要介绍了提高热处理箱式电炉、井式电炉、浴炉和燃料炉炉温均匀性的各种技术方法。
The gas flow and fuel spray status in combustion chamber are two important factors which affect the mixture formation in diesel cylinder.
而气缸或燃烧室内的气流运动和燃料的喷雾特性，是影响柴油机混合气形成和燃烧过程的两大重要因素。
In cars, air is required in the combustion chamber where fuel is burned to produce power.
在汽车，所需空气在燃烧室在燃料燃烧产生的力量。
Dynamics and evaporation of fuel droplets in the chamber of fuel burning boiler with Venturi burner are simulated by employing particle trajectory model.
采用颗粒轨道法对选配文丘利型油燃烧器的燃油锅炉炉内油滴颗粒的运动和蒸发过程进行了数值模拟。
A gas flow separator near the fuel inlet forms one or more smaller volumes within the combustion chamber where the fuel can mix and burn with only a portion of the air introduced into the chamber.
燃料入口附近的气流隔离器在燃烧室中形成一个或者多个更小的容积，在此处燃料可以与引入燃烧室中的仅仅一部分空气混合并燃烧。
As the air inlet diameters increase, the intake central swirl is intensified and thus fuel evaporation in the first combustion chamber is improved.
加大进气孔直径使进气中心涡流增强，燃油在一级燃烧室中蒸发量增加。
The method can be used for combustion Chambers with any shape to match the fuel injection pressure, nozzle construction, injector position and intake swirl ratio with chamber shape.
该方法可适于任意形状的燃烧室，能反映出喷油压力、喷油嘴结构及安装位置、进气涡流比等参数与燃烧室形状的匹配关系。
This paper presents a combustion chamber designed for Hunang175F-1 model diesels with improved cold starting ability and fuel consumption.
本文介绍了为改善湖南175f - 1型柴油机冷起动，而又获得较好经济性的燃烧室结构。
By analysis, optimum matching of combustion system of swirl chamber engine is believed to be capable of improving heat release rate and fuel economy.
通过分析，认为对涡流室柴油机燃烧系统进行优化匹配，可改善放热规律，从而提高经济性。
Based on experimental investigation of the liquid fuel atomization in high speed airflow and the flow characteristics of ramjet combustion chamber, a three-dimensional model was established.
针对亚燃冲压发动机燃烧室内部流动特点，结合二元稳定器试验台高速气流场燃油雾化特性试验，建立试验件三维模型并对其喷雾两相流动进行数值模拟。
Based on experimental investigation of the liquid fuel atomization in high speed airflow and the flow characteristics of ramjet combustion chamber, a three-dimensional model was established.
针对亚燃冲压发动机燃烧室内部流动特点，结合二元稳定器试验台高速气流场燃油雾化特性试验，建立试验件三维模型并对其喷雾两相流动进行数值模拟。
应用推荐