The product is characterized by FTIR.
用FTIR对产品进行了表征。
It was characterized by the FTIR and elemental analysis.
利用FTIR和元素分析对其进行表征。
Methods FTIR and CD spectra were used to analyze the structure of SH.
方法采用傅里叶变换红外光谱（FTIR）和圆二色谱（CD）对SH的结构进行分析。
So FTIR spectra could be used for the identification of wheat varieties.
因此ftir光谱法可用于不同小麦品种的鉴别。
Copper methanesulfonate is synthesized and characterized by TGA and FTIR.
合成了甲烷磺酸铜，用热重和红外对其进行表征。
Theoretically the resin structure was analyzed and characterized by FTIR.
并用红外光谱对合成树脂的结构进行了分析表征。
The matching rate between the results and standard FTIR spectra was over 90%.
定性结果与红外标准谱图的匹配率均在90%以上。
FTIR shows the water absorbent resin is graft copolymer of cellulose and polyacrylate.
FTIR分析表明，吸水树脂是纤维素和丙烯酸的接枝共聚物。
According to the result of FTIR, the absorption peak of the hemicellulose became weaker.
FTIR分析表明，半纤维素和部分木质素的特征吸收峰减弱。
A method for the measuring atmospheric transmittance using FTIR spectrometer was proposed.
提出了一种利用FTIR光谱仪进行大气透过率测量的方法。
The structures of epoxy resin and synthesized epoxy-acrylic resin are characterized by FTIR.
用FTIR对环氧树脂和合成的环氧丙烯酸树脂的结构进行了表征。
The findings indicated that the FTIR spectra of different formulas show certain regular changes.
结果表明，不同配伍方式样品的红外谱图特征具有一定的变化规律。
The microstructure of hydrate of cement paste was studied by FTIR reflection spectrum of microscope.
利用红外显微镜反射光谱研究水泥浆体的水化产物微结构。
In situ FTIR reflection spectroscopy was used to study mediated enzyme electrode and immunoelectrode.
利用原位FTIR反射光谱对介体型酶电极、酶免疫电极进行了研究。
Variable temperature FTIR spectra method was used to study the crystalline spectra of crystal compounds.
变温红外光谱法是研究结晶化合物结晶谱带的一种有效方法。
FTIR results indicate that terbium ions coordinated with the carbonyl groups in polyurethane molecular chains.
红外光谱研究结果表明，铽离子与聚氨酯分子链中的羰基发生了配位作用。
The FTIR spectrum showed intercalation of organic reagents into the layers of montmorillonite after modification.
（红外光谱）分析结果表明，改性后有机季铵盐已经插层进入蒙脱石层间。
The gas in the gas chambers concerned are analyzed by ion chromatography, GC-FTIR method, and gas chromatography.
应用离子色谱法、GC-FTIR联用法、气相色谱法对相关气室的气体进行了分析。
The structure of the new silicone monomer is characterized by use of NMR and the copolymer is characterized by FTIR.
用核磁共振(nmr)对新型硅烷单体进行了结构表征，并采用傅里叶红外光谱(FTIR)证实了共聚物结构。
The Raman and FTIR spectra show that the structure and composition of the films change with the radio-frequency power.
拉曼及傅里叶变换红外光谱分析显示，随着射频功率的改变，薄膜的结构和组分也随之变化。
The reaction of OH radical with co was investigated by time-resolved Fourier transform infrared (TR-FTIR) spectroscopy.
用时间分辨-傅立叶变换红外发射光谱法研究了OH自由基与CO的反应。
An atmospheric composition monitoring system, in which the sun-tracking and FTIR spectroscopy are combined, is introduced.
介绍研制的太阳跟踪和傅里叶变换红外(FT IR)光谱技术相结合的大气成分监测系统。
TG analysis shows that, with temperature increasing, anhydride formation is occurred first, and confirmed by the FTIR bands.
TG分析结果表明，随温度的升高，首先形成了酸酐，这可由FTIR光谱确定。
Fourier transform infrared spectroscopy (FTIR) indicates that all of films have the same structure of hexagonal construction.
傅立叶变换红外光谱(FTIR)表明，所获得的薄膜结构一致，均为六角氮化硼薄膜。
The polymer structure was investigated by using FTIR, X-ray diffraction, electron diffraction and contact Angle measurements.
通过热失重，红外光谱、X -射线衍射、电子衍射和接触角测定等，研究聚合物结构与性能。
The structures, compositions and chemical bonding states of the obtained films are investigated by using SEM, XPS, Raman and FTIR.
用X光电子能谱、拉曼和红外吸收光谱对薄膜的结构、成分和化学键等进行了研究。
The success of the synthesis of the PEG TEFE silane was confirmed with (1)H NMR and Fourier transform infrared spectroscopy (FTIR).
TEFE硅烷的成功组装已经在（1）HNMR和傅里叶变换红外光谱（FTIR）分析中得到证实。
The composition of copolymer and emulsion particle size and distribution are characterized by use of FTIR and particle size analyzer.
采用FT - IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。
Allyl ether phenolic resin was synthesised, then it was copolymerized with bismaleimide. Its properties were characterized by FTIR and DTA.
本文合成了烯丙基醚化酚醛树脂，并与双马来酰亚胺共聚，通过FTIR和DTA进行了性能表征。
Allyl ether phenolic resin was synthesised, then it was copolymerized with bismaleimide. Its properties were characterized by FTIR and DTA.
本文合成了烯丙基醚化酚醛树脂，并与双马来酰亚胺共聚，通过FTIR和DTA进行了性能表征。
应用推荐