The experiment results indicate this friction compensation method can effectively compensate the friction and greatly improve the system character.
实验研究结果表明，该控制补偿方法可以有效的补偿系统低速运行时的摩擦力，大大提高系统低速性能。
Twin experiments show that the adjoint method can inverse the prescribed bottom friction coefficients perfectly.
理想实验的结果表明，利用伴随法反演底摩擦系数是合理且有效的。
This paper presents a method of calculating the static sliding friction factor between zigzag slot and pin. A brief description of the fuse zigzag slot mechanism is given.
该文给出了求解惯性筒上的曲折槽与销之间的滑动静摩擦系数的一种方法，介绍了引信曲折槽机构。
The results show that the friction factor measured is reliable and the computation method is practical.
通过试验证明了测定的摩擦阻力系数是可信的，拟定的计算方法是实用的。
Finite element method was carry out to investigated the effects of friction in a novel equal channel angular pressing (ECAP) based procedure which can handles the strip metal ECAP procedure.
应用有限元方法对一种全新的可应用于板料的等通道角挤压(ECAP)方法中摩擦力的作用进行了有限元模拟。
This paper presents how to use a variable gain PID control method to compensate the friction in load simulator.
介绍了利用变增益PID控制方法补偿负载模拟器中摩擦力的方法。
The theoretical calculation method for the friction resistance produced by O-sealing washer is seldom expounded in existing referance materials and document.
现有的资料及文献对O形密封圈产生摩擦阻力的理论计算方法介绍甚少。
By applying theories of Fuzzy sets, proposal is offered of an analytic method of Fuzzy inversion of negative friction on shafts through DE watered subsiding grounds.
采用模糊集理论，提出了一种模糊反演疏水沉降地层井筒负摩擦力的分析方法。
Now, the friction coefficient is generally got from gouge test by using the double shear method.
目前，断层摩擦系数主要是应用双剪法对采自断层的断层泥进行实验室测试和研究而取得的。
Computer simulation and experimental results show the method can effectively overcome the influence of dead zone and friction and can improve positioning accuracy considerably.
计算机仿真和实验结果表明，自适应控制能有效地克服系统中固有的死区、摩擦力影响，明显提高位置精度。
Experiment study for the dynamic friction compensation method is performed at last.
最后，论文对摩擦力动态补偿方法进行了试验研究。
An adaptive fuzzy integral type sliding mode control method based on GA was proposed to control single-axis motion control system with nonlinear dynamic friction.
提出一种基于GA的自适应模糊积分型滑模控制策略，并将其用于具有非线性动态摩擦力的单轴运动控制系统中。
The method and apparatus have a reduced sensitivity to error sources, i. e. gravity, internal friction and operator interference (unsteady holding of the instrument).
该方法和装置具有对误差源，即，重力、内部摩擦力和操作者干涉(不稳固地保持仪器)而言减小的灵敏度。
A method with probe and sensors is recommended to determine, the dynamic coefficient of friction in deep-drawing process.
主要介绍利用探针和传感器测定拉深过程中摩擦系数的实验方法，据此获得变形区内摩擦系数的分布情况。
The results indicate that this method can identify and forecast effectively the over - friction malfunction of flight data tape recorder by processing 312 sorties of flight data.
对获得的312个架次数据进行了处理，结果表明该方法可有效地识别和预测磁带记录器卡滞类故障。
The friction circle method is often used to analyse the slope stability in Open-pit mines.
在露天矿边坡稳定性分析中通常采用圆弧滑动而的分析方法。
Change of negative friction in pile with consolidation time is simulated by finite element method.
采用有限元方法模拟了基桩负摩阻力随着固结时间的变化。
Statistic method is used to analyze the correlation between static contact area and dynamic friction force. The results clarify that there is a linear correlation with significant level.
应用统计学方法对静态接触面积与动态摩擦力进行了相关分析，结果表明二者具有显著水平的线性相关关系。
Developed wellbore transient flow model and friction calculating method for the sand mixed fluids effected by propant.
建立了井筒不稳定流动模型，提出了支撑剂影响下的混砂液摩阻计算方法。
Radial anti friction bearing, in particular single-row spherical roller bearing, and method for mounting thereof.
径向滚动轴承，尤其是单列球面滚柱轴承，及其安装方法。
The results show that the wavelet denoising method can effectively restrain the noise in friction and sudden unbalance signal, and reserve the fault character information in the signals.
结果表明：小波分析降噪方法能够有效抑制碰磨和突加不平衡信号中的噪声并保留故障特征信息。
Pneumatic PWM position servo system is nonlinear system. The satisfied results are difficult to be obtained with traditional control method while the friction force of cylinder is large.
气动脉宽调制位置伺服系统是非线性的系统，在气缸摩擦力较大的情况下，采用传统的控制方法难以取得满意的效果。
This method can calculate the nonlinear friction force conveniently and can consider the effects of the blade high modes and the high harmonics of the blade responses.
该方法能够方便地计算接触面非线性摩擦力，考虑响应的高次谐波以及叶片高阶振型的影响。
Examined by practice, the method about the working condition parameter optimization for coal plough and the calculation about friction force on plow head are feasible.
经实践检验，本文的刨煤机工况参数优化方法和刨头摩擦力计算方法是切实可行的。
Based on load transferring concept, this paper puts up a new method which USES double broken line model to calculate the negative friction of pile.
基于荷载传递函数的概念，提出了一种用双折线模型来计算桩负摩阻力的方法。
From the common mechanical phenomenon, present a theoretical method on how to judge the direction of static friction force.
本文以常见的力学现象为例，从理论上阐述判断静摩擦力方向的方法及作功问题的证明方法。
An optical testing method of micro-friction and its principle was introduced to characterize the friction properties of material surface under microcosmic conditions.
为了测试微观条件下材料表面的摩擦学性能，给出了一种微摩擦力的光学测试方法。
In the calculations of roll torque of ablation lag, a rapid method for calculating combined influence of ablation injection and roughness on skin friction coefficient is mainly described.
在烧蚀滞后滚转力矩的计算方法中，本文主要介绍滞后引射率和粗糙度对壁面摩擦系数联合影响的一种快速计算方法。
The method can be used to calculate the vibration features of circular blades with friction damper, so it provided the foundation for designing the blade with friction damper.
该方法稍加推广即可研究循环叶片组的振动特性，为指导带缘板阻尼器叶片的减振设计奠定了基础。
This paper predicate the ultimate bearing capacity of squeezed branch pile based on 110 pile from different site by hyperbola method, and compare with the results of the friction pile's.
用双曲线方法对110根挤扩支盘桩的极限承载力进行预测，并与直杆桩预测结果进行对比。
应用推荐