The invention relates to friction material and a preparation process thereof.
本发明涉及一种摩阻材料及其制备方法。
When a rotor is cleaned, it will need to be re-burnished again to re-deposit the friction material onto the surface.
当碟盘被清洗后，它将需要重新磨合以使摩擦性材料重新沉积到碟盘表面。
Oil-retaining bearing, friction material, (soft and hard) magnetic element, electronic ceramics, electrical alloy, etc.
含油轴承、擦材料、软、性元件、子陶瓷、工合金等。
The principle part of composition in this research was the composition of FMPS iron based powder metallurgical friction material.
研究采用的铁基粉末冶金摩阻材料主体配方是FMPS型铁基粉末冶金摩阻材料基础配方。
Friction Material Fade - When pads reach high temperatures they can sometime "outgas" chemicals that redeposit themselves on the surface of the brake pad.
摩擦性材料衰减——当刹车片达到高温时有时会“蒸腾”出一些化合物并再次沉积到刹车片的表面。
The Shandong bright emery factory is the specialized production emery anti-friction material, the wear-resisting grounds around a house emery Manufacturer.
山东光明金刚砂厂是专业生产金刚砂耐磨材料、耐磨地坪金刚砂的生产厂家。
A new type of friction material has been prepared with carbon fiber and steel fiber as reinforcements and ring-opening polymerized phenolic as matrix resin.
采用碳纤维和钢纤维为增强材料、开环聚合酚醛树脂为基体，制得新型摩阻材料。
A new type of friction material was prepared with carbon fiber and steel fiber as reinforcements and FB polymerized phenolic as matrix resin by mould pressing technology.
采用碳纤维和钢纤维为增强材料、硼酚醛树脂为基体，通过模压成型制得新型混杂纤维增强树脂基摩阻材料。
This paper introduces the working features of friction material products and their requirements for reinforcement, with resin matrix friction material particularly discussed.
介绍摩阻材料制品工况特点和材料的增强要求。讨论树脂基摩阻材料。
The practice also proved that the nodular cast iron is one good anti-friction material, its wear-resisting performance surpasses the gray iron and the carbon structural steel.
实践还证明球铁是一种良好的耐磨材料，其耐磨性能优于灰铸铁和碳素结构钢。
The universe company grader blade quality stands up to the most rigorous test, ADAPTS the bad working conditions, the knife strap two-sided USES the high strength anti-friction material bit.
天宇公司平地机刀片质量过硬，适应恶劣的工作环境，刀板带双面用高强度耐磨材料刀片。
With special raw material (raw rubber bearing) and small friction coefficient; electricity -saving.
含特殊原料原橡胶轴承，摩擦系数小，更省电。
The Physic Material is used to adjust friction and bouncing effects of colliding objects.
物理材质用于调整摩擦力和碰撞单位之间的反弹效果。
This text analysed the influence of steel elastomer material, heat treatment craft to load cell lag error combining internal friction mechanism and practical experience.
本文结合内耗机理及部分实践提出了钢弹性体材料处理、热处理工艺对传感器滞后误差的影响分析。
The contact pretension between the layers of cylindrical structure concerns the non-linearity of geometry and material, as well as the influence of interface friction.
多层圆柱结构的接触预紧问题，涉及到几何非线性和材料非线性以及接触面上摩擦力的影响。
The real-time identification of material properties and friction coefficient is as the key to intelligent control of deep drawing process.
材料性能参数和摩擦系数的实时识别是实现拉深过程智能化控制的关键。
In the calculation, both material and geometric nonlinearities are considered. The rolling pressure, friction, front tension and back tension distributions are given.
计算中同时考虑了几何和材料双重非线性的影响，给出了轧制压力、摩擦力和前后张力的分布。
By simulating in DYNAFORM, the influences of the factors, such as the friction coefficient, die clearance and material parameter 'sn and r, on stamping formability were studied.
应用dynaform软件进行模拟计算分析，研究了摩擦系数、模具间隙、材料参数(n,r值)等因素对零件成形的影响。
The experimental results indicate that this material possess low friction coefficient and excellent antifriction property.
试验结果表明：此各材料具有较低的摩擦系数和良好的减摩耐磨性能；
It shows that the elastic modulus and the molecular component of friction coefficient of the pulley material have great influence on the wear resistance of wire rope.
结果表明，绳轮材料的弹性模量和摩擦系数分子分量，对钢丝绳耐磨性能有很大影响。
The wear of friction wafers in main clutch features uneven radical distribution. In the operation of friction wafers, high local temperature and material softening are important reasons causing wear.
分析了主离合器摩擦片的磨损具有沿径向非均分布的特点，指出摩擦片在使用过程中，局部高温和材料软化是产生磨损的重要原因。
An additive used in a fluid to improve its flow. Friction reducer are often made of polymer or resin material that forms a slick surface on solids.
为改善流体的流动在流体中所使用的添加剂。减阻剂常由聚合物或树脂材料制成，这些材料在固体颗粒上形成光滑的表面。
During the treatment of a particle field the effect of particle diameter, specific weight, rigidity of material and friction factor, etc on particle movement has been taken into account.
在处理颗粒场时考虑到颗粒直径、比重、材料的刚度、摩擦系数等对颗粒运动的影响。
It is a compound contact problem of rolling bearings dynamic contact combined of multi-body contact, friction, sliding, material nonlinearity, geometric nonlinearity.
滚动轴承的动力学接触包含了多体接触、滑动、摩擦、几何非线性、材料非线性、边界非线性的复合接触问题。
It was indicated that enhancing the friction between the material and the rotary kiln wall is easy to carry out the rolling motion from the aspect of force moment.
本文从力矩的角度出发，得出了要实现物料的滚落状态，可以提高物料与窑壁间的摩擦系数，并提出了具体方法。
This material possesses a lower friction coefficient, better wear-resistance and seal ability with water medium. Its service life is superior to that of the imported seal material.
这种材料在水介质中具有较低的摩擦系数和较好的耐磨与密封性能，其使用寿命优于进口的密封材料。
Silk thread slides when the job, in China eye outside, for reducing friction, must raise material hardness, smoothness and form.
工作时，丝线在瓷眼表面滑动，为了降低摩擦力，必须提高材料的硬度，光洁度及形状。
The friction coefficient of bulged tile material of ROTOGRIP mechanical chuck is relatively large.
ROTOGRIP机械夹头胀起瓦片材质的摩擦系数比较大。
The friction coefficient of bulged tile material of ROTOGRIP mechanical chuck is relatively large.
ROTOGRIP机械夹头胀起瓦片材质的摩擦系数比较大。
应用推荐