This text analysed the influence of steel elastomer material, heat treatment craft to load cell lag error combining internal friction mechanism and practical experience.
本文结合内耗机理及部分实践提出了钢弹性体材料处理、热处理工艺对传感器滞后误差的影响分析。
Influence of pile spacing, pile cap dimension and Angle of internal friction of embankment filling on the pile efficacy is analyzed.
研究了桩间距、桩帽大小和填料内摩擦角对桩体荷载分担比的影响。
Keeping dynamic equilibrium of friction sheet internal temperature and working environmental temperature was required to ensure it work normally.
摩擦片正常工作的条件之一是其内部温度与工作环境温度差保持动态平衡。
Internal friction Angle has a strong nonlinear relation with moisture state related saturation and a weak nonlinear relation with density state related saturation respectively.
内摩擦角和与水分状态相关的饱和度的关系是强非线性的，和与密度状态相关的饱和度的关系是弱非线性的。
Loose hole plating chromic layer by weight used in the sliding friction parts and heat resistance, corrosion, wear parts, such as internal combustion engine cylinder lumen, piston rings.
松孔镀铬层应用于受重压的滑动摩擦件及耐热、抗蚀、耐磨零件，如内燃机汽缸内腔、活塞环等。
The usual internal friction instrument is low-frequency mechanical relaxation instrument.
通常的内耗仪，应为低频力学弛豫谱仪。
The method and apparatus have a reduced sensitivity to error sources, i. e. gravity, internal friction and operator interference (unsteady holding of the instrument).
该方法和装置具有对误差源，即，重力、内部摩擦力和操作者干涉(不稳固地保持仪器)而言减小的灵敏度。
However, until now the internal friction is only considered in limit analysis and plastic mechanics, but not included in elastic mechanics and energy theory.
然而，至今只有岩土极限分析与塑性力学中考虑岩土体的内摩擦力，而在弹性理论与能量理论等诸方面均未体现。
To analysis the internal forces and deformations of gliding cable structures, one element taking friction into consideration was developed.
为精确分析滑动索系结构的内力和变形，创建了一种考虑摩擦力影响的新单元。
The analogy between internal friction increment and overstress due to strain-rate sensitivity is clarified.
本文也指出了由于应变率敏感性所引起的内耗增量和过应力的类比性。
Another is caused by internal friction in soil and external friction between soil and track-plate face.
其二为由土壤内摩擦力及土壤对履带板的外摩擦力所产生的推进力。
There have a internal friction in Metal to Insulator (MI) transition region, and the modulus have been changed.
在金属到绝缘转变区域出现了内耗峰，并且模量也出现了变化。
The temperature dependence of Young's modulus and the internal friction for the cured epoxy resin is typical for a slightly crosslinked polymer.
杨氏模量及内耗温度谱的实验结果指出：环氧树脂具有典型微少交联高聚物的力学性貭。
From the experiments of low frequency sub resonance vibration for different fluid saturated rocks, the internal friction peak was found to be a typical relaxation peak.
通过饱和多孔岩石的低频亚共振试验，得到了饱和多孔岩石的内耗峰是典型的弛豫峰的结论。
Thus, in the state of complete order, the internal friction would vanish, whereas it would be a maximum in the state of complete disorder.
所以一定温度下在完全有序的状态时内耗不出现，而在完全无序状态时内耗最大。
Fatigue of metals is an energy dissipation process. The main energy dissipation includes the internal friction and the stored energy.
金属疲劳是一个能量耗散过程，其中主要的能量耗散形式包括内耗热和储能。
The results show that the internal friction Angle of rock has importance affect on the displacement of surrounding rock for deep roadway when in-situ stress and support resistance all are certain.
分析结果表明，在地应力和支护阻力一定时，岩石的内摩擦角对深埋巷道围岩位移的影响最为明显。
The influences of the Angle of internal friction, the Angle of wall friction to the direction of principal strain rate are analyzed.
分析了内摩擦角、壁面摩擦角对最大主应变率方向的影响。
If the flood wave is deformed on its way of propagation, there exists acceleration term or inertia force that equals to internal friction.
波体在传播途中变形，则有加速项或惯性力，内摩阻力等于惯性力。
If the flood wave was not deformed in motion, there was no internal friction loss, which is called kinematic wave.
洪水波在运动中不变形，则没有内摩阻损失，即所谓运动波。
The results indicate that elastic modulus, the angle of internal friction, and cohesive stress of the backfill are main factors affecting the stability of the slope.
结果表明，土体的弹性模量、内摩擦角与粘聚力是影响边坡位移的重要因素。
An attempt was made in the present research to investigate this problem by means of internal friction measurements.
本文尝试用内耗测量的方法来研究这个问题。
The results showed that on the yielding plateau, the internal friction did not change with the strain, but increased linearly with the increase of strain rate and varied inversely with frequency.
所得结果表明，在屈服平台上，范性形变过程中内耗基本不变，且其值随范性形变速率的增加和测量频率倒数的增加而线性增加。
These findings improve the understanding of the mechanism of GB internal friction.
这些发现加深了对晶界内耗机制的认识。
The reasons that internal friction is very low and stable are discussed.
讨论了内耗低和稳定的原因。
The progress of study on the alloying of rare earth in steel by internal friction was introduced.
介绍了用内耗方法研究钢中稀土合金化取得的进展；
The progress of study on the alloying of rare earth in steel by internal friction was introduced.
介绍了用内耗方法研究钢中稀土合金化取得的进展；
应用推荐