It introduces mode analysis and frame optimization method about the bed part of WEDM-LS.
介绍了床身有限元分析的力学模型简化方法，结合实例对床身的应力场和位移场进行分析。
Reclassification to R&D work flow process, on the basis of which, frame optimization and technical enhancement is studied.
对开发设计作业流程重新进行了阶段划分，并在此基础上实施了作业过程结构优化和成本技术改善。
It's a fundamental mistake to frame scalability as an optimization problem.
把可伸缩性归类为优化问题存在基本的错误。
An iteration method is presented to solve the optimization function for approximating the rotation transformation part of the pseudo moving frame at any position of the motion trajectory.
采用迭代法求解该优化方程来逼近运动轨迹任意处伪活动标架的旋转变换矩阵。
Basis on the analysis of system frame and running characteristic of BLDCM, optimization method for system efficiency is presented.
在分析BLDCM系统结构和运行特点的基础上，提出系统效率优化的方法。
This paper studies the random parameters rigid frame structure optimization design based on reliability under random load action.
对随机参数刚架结构在随机荷载作用下基于概率的优化设计进行了研究。
In order to reduce the weight of an aerial telescope main structure, a topologic optimization design method of the aerial telescope main frame was presented.
针对某航空望远镜主结构的重量过高的问题，提出了对航空相机望远镜主框架进行拓扑优化设计的方法。
Optimization for the vehicle seat frame design has been conducted using the FEA software, which presents one efficient method for lightweight design of an automobile seat.
利用各有限元分析软件的特点进行了汽车座椅骨架改进设计，探索了汽车座椅轻量化的途径。
The design of the body frame topologic structure is presented, using FEM-based topological optimization technique.
利用基于有限元法的拓扑优化技术设计车身大骨架的拓扑结构。
The integrated optimization method and the virtual prototype technology were applied to the study on the dynamic balance of frame transmission mechanism.
将集成优化方法和虚拟样机技术应用于框架传动机构的动平衡研究。
The gradient optimization algorithm based on the stochastic finite element was adopted to analyze the reliability of the frame with stochastic parameters.
基于随机有限元的梯度优化算法引入拥有随机参数的框架可靠度分析。
The result will lay the foundation to further study vibration, fatigue, noise of dump truck and for the frame of reference for design optimization.
为进一步研究整车振动、疲劳、噪声等奠定了基础，也为车架结构的优化设计提供参考依据。
The method of optimization theory based on dual method was transplanted to design fuselage main frame, and the optimizing model of fuselage main frame was established.
将基于二次规划的准解析法优化理论应用于机身主要承力框的设计中，建立了机身主要承力框的优化模型。
With using ANSYS, design optimization was developed to the high-speed press frame.
利用ANSYS软件对高速压力机组合机身进行优化设计。
There are four post frame molding press and two kinds of structure, the fuselage uses finite element analysis and optimization design of the structure, reasonable structure.
成型压机有四柱和框架二种结构，机身采用有限元件结构分析和优化设计，结构合理。
Including peaceful and undisturbed life insurance sale optimization design basis, principle, goal, frame and content.
包括安泰人寿销售流程优化设计的依据、原则、目标、框架和内容。
The optimization of a single sub-frame using the developed algorithm took under 3 seconds on a typical workstation.
优化一个单一的子帧利用发达算法下了3秒钟就一个典型的工作站。
Based on the results of modal analysis and optimization, some modifications to the frame are accomplished. The road test results show that the ride comfort of the motorcycle is improved.
最后针对模态分析和优化结果对车架结构进行了改进改进后的整车平顺性道路试验表明摩托车的振动舒适性得到改善。
Carries on the optimization to the H. 263 quantification technology, a intra-frame quantification search table that can avoid the division operation is constructed.
263量化技术也进行了优化，构造出一个可以避免除法运算的帧内量化查找表。
This method first extracted the global motion and local motion features in each frame, and video key frame was extracted by Particle Swarm Optimization (PSO) adaptively.
该方法首先提取出视频中每帧的全局运动和局部运动特征，然后通过粒子群算法自适应地提取视频关键帧。
This paper summarized structure optimum design based lightweight on special heavy vehicle frame by FEM and mathematics optimization method.
采用有限元法结合数学规划法对重型专用车车架进行了轻量化结构优化设计。
The topology optimization design module of the commercial finite element software ANSYS was used to the bicycle frame and multiple arch bridge for the topology optimization design.
通过采用商用有限元软件ANSYS中的拓扑优化设计模块对自行车车架和多拱拱桥进行了拓扑优化设计，优化结果表明所得拓扑结构清晰，并与实际的自行车车架和多拱拱桥非常相似。
This paper probes into the optimization of structural design for bottom bearing beam of the lower masonry structure of brick-frame construction.
对砖混—框架结构下部砌体结构承重梁结构设计优化进行探讨。
Finally, the lightweight optimization design on rear frame is carried on.
论文还对后机架进行了轻量化优化设计。
This article focused on discussing about optimization of frame-shear structure basing on displacement.
本文着重探讨基于位移的框剪结构的优化设计。
In this paper, a nonlinear planning method, quasi Newton multiplier method, is introduced for the optimization of the bracing stiffness in braced frame structures with symmetric bracings.
本文针对设置有对称斜腹杆的钢筋混凝土框架-桁架结构，运用非线性规划方法拟牛顿乘子法，对框架-桁架结构体系中斜撑的刚度进行优化。优化结果可供工程设计参考使用。
In this paper, a nonlinear planning method, quasi Newton multiplier method, is introduced for the optimization of the bracing stiffness in braced frame structures with symmetric bracings.
本文针对设置有对称斜腹杆的钢筋混凝土框架-桁架结构，运用非线性规划方法拟牛顿乘子法，对框架-桁架结构体系中斜撑的刚度进行优化。优化结果可供工程设计参考使用。
应用推荐