During the finite element calculation of vehicle frame, the simulation of front leaf spring in the complete frame finite element mould must be considered.
在汽车车架有限元计算中，必须考虑前钢板弹簧在整个车架有限元模型中如何模拟。
This topic through a section bus half load bearing type body frame finite element analysis computation, seeks the truly feasible body frame lightweight way.
本课题通过一款大客车的半承载式车身骨架有限元分析计算，寻求确实可行的车身骨架轻量化途径。
We ran finite element analysis stress calculations to determine where the frame needed to be reinforced for maximum strength and stiffness, then reinforced those areas with additional carbon fiber.
我们跑应力有限元分析计算，确定了框架需要得到加强的最大强度和刚度，然后加强这些领域更多的碳纤维。
Complete finite element analysis is conducted on pile frame of SYR200 rotary pile drill with the model, which provides guiding reference for the design of pile frames.
使用这种模型对SYR200旋挖钻机桩架进行了整体有限元分析，分析对钻孔机桩架的结构设计有指导意义。
It is effective to use finite element method in monolithic analysis of an elastic foundation with the frame on it.
用有限单元法对弹性地基和上部框架进行整体分析，是一种有效的办法。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
首先利用平面框架结构的模型实验，借助有限元软件ANSYS，利用模态分析结果，实现了基于有限元理论的传感器优化布置。
Based on finite element simulating tests of frame columns, load-displacement of frame columns without tests are simulated, and the influencing factors of frame columns are synthetically analyzed.
在有限元模拟试验框架柱的基础上，还对未做试验的框架柱进行了骨架曲线的模拟，从而对影响框架柱的各因素进行了综合分析。
This paper gave the computer simulation of natural frequencies and vibrational modes of truck frames, based on the structural features of the frame, by finite element method of thin wall rod system.
本文根据汽车车架结构的特点，应用薄壁杆系有限单元法，对汽车车架的固有频率和主振型进行了计算。
A simulative calculation was conducted of the natural frequencies of the frame towers using large-scale finite element program ANSYS, and the calculated value was compared with the test value.
利用大型有限单元程序ANSYS对框架塔的自振频率进行了模拟计算，并将计算值与试验值进行了对比。
Finite element technology adopted in frame makes more strength in working stress position.
车架结构运用有限元分析技术，工作受力部位采用增强刚度和强度结构。
Based on the theory of stochastic finite element, the structural parameters of frame shear structure including stiffness and mass and damping are simulated to be stochastic variables.
以随机有限元理论为基础，将框剪结构的刚度、质量、阻尼等结构参数为随机变量。
On the basis of this, the integrated finite element model of motorcycle has been established including frame, engine, suspension, wheel, rider and oil box etc.
并基于此，建立整车的有限元模型，包括车架、发动机、悬架、轮胎、乘员、油箱等。
The seismic capacity of the box-shaped joint in the reinforced concrete mega-frame structure system is studied, and the finite element analysis is done with ANSYS .
本文对钢筋混凝土巨型框架结构箱形节点抗震性能进行了试验研究及ANSYS程序有限元分析。
The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth. A feasible and accurate finite element model is offered.
对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。
When establishing finite element calculation model of three-axle bogie frame, it must be certain that the weight of each of the three axles is equal while adding restraint.
分析了三轴转向架构架在有限元计算分析时，约束的施加必须保证三根轴的轴重一致性；分析比较了中间轴一系簧垂向刚度对构架强度产生的影响。
In this paper a practicable testing method for frame rigidity is described. The method is aimed at checking the finite element model of frame structure analysis.
为检验车架结构分析的有限元模型，通过一具体车架的刚度试验，总结出一套实用的车架刚度试验方法。
Through the visualization software VB connecting and invoking the ANSYS, they realize the finite element strength analysis of the bus frame.
通过可视化软件VB与ANSYS连接和调用，实现客车骨架强度的有限元分析的可视化。
The frame of a new style motorcycle named Sport Recreation Vehicle (SRV) was researched. Using the finite element mode analysis method, the vibration mode of motorcycle frame was analyzed.
以一新型运动型多功能休闲摩托车车架为研究对象，采用有限元模态分析的方法，对车架振动模态进行了分析。
On the basis of the research on the frame structure of the multi-point Forming machine, its finite element model and mathematical model have been set up.
本文在对三梁四柱式多点成形压力机机架结构研究的基础上，建立了压力机机架有限元模型和机架结构优化的数学模型。
Described are the development target, main technical features and parameters, main structure, finite element calculation results and testing of the 4d-axle welding frame type bogies.
介绍了4d轴焊接构架式转向架的研制目标、主要技术特点和参数、主要结构、有限元计算结果及试验情况。
Analysing and calculating the strength of generator frame and rotor with finite element method.
利用有限元方法分析验算了机座和转子的强度。
A reasonable result of frame strength analysis was obtained by both the photoelasticity and finite element methods.
利用光弹性力学、有限元计算方法，进行强度分析取得了可靠的分析结果。
Finite element analysis software is used to realize the advanced analysis of character shaped power-transmission frame.
应用有限元分析软件，实现了对一人字形变电构架的高等分析，论述了高等分析的过程。
Stochastic dynamic responses of planar rigid-frame structures to quake loads are investigated by using the finite element approach.
本文利用有限元方法，分析了平面刚架结构对地震载荷的随机动力响应问题。
Theoretical calculation and discussion are presented on the dynamic characteristics of main frame of sugarcane cleaner using finite element method.
利用有限元分析的方法对甘蔗剥叶机机架的动态特性进行了理论计算和探讨。
According to the process of finite element, the whole program frame can be divided into several basic classes, from which some sub-classes are derived.
根据非线性有限元的求解步骤，把整个程序框架划分成一些基类，并派生出相应的子类。
Taking a marine stacker as model sample, the finite element model for frame construction is established by using ANSYS software and the results are analyzed.
以某船用巷道堆垛机为模型样本，以ANSYS软件为平台建立框架结构的有限元模型，并求解分析。
The gradient optimization algorithm based on the stochastic finite element was adopted to analyze the reliability of the frame with stochastic parameters.
基于随机有限元的梯度优化算法引入拥有随机参数的框架可靠度分析。
The gradient optimization algorithm based on the stochastic finite element was adopted to analyze the reliability of the frame with stochastic parameters.
基于随机有限元的梯度优化算法引入拥有随机参数的框架可靠度分析。
应用推荐