The plastic limit analysis is applied to the unstable fracture load.
对失稳断裂载荷进行了塑性极限分析。
The relationship between the outcome of operatively treated calcaneal fractures and institutional fracture load.
手术治疗跟骨骨折疗效与机构骨折负荷的关系。
Composite films fracture load can be calculated with plus theorem based on the load of base material when design the structure of the composite material.
在设计复合材料结构时，可以在基材的负载基础上，根据叠加法则推算出复合膜的破坏载荷。
The first peak load is lower slightly than the fracture load of adhesive bonded joints, and the second peak load is almost the same as the fracture load of the spot we…
曲线上第一载荷峰值略低于单纯胶接接头的断裂载荷，第二载荷峰值与单纯电阻点焊接头的强度基本一致。
The first peak load is lower slightly than the fracture load of adhesive bonded joints, and the second peak load is almost the same as the fracture load of the spot welded joints.
曲线上第一载荷峰值略低于单纯胶接接头的断裂载荷，第二载荷峰值与单纯电阻点焊接头的强度基本一致。
Result When the whole thickness of the samples were determined, the fracture load, bending strength and elastic modulus were increasing according the increase of the metal thickness.
在总厚度不变时，破坏载荷，弯曲强度及弹性模量都随金属厚度增加而增加。
The real fracture strength is restrained by both stresses caused by outside load and residual stresses after grinding.
实质断裂强度性能受到了外加载荷与磨削残余应力的组合应力的制约。
Fracture mechanism, initiation and propagation of cracks, and the control method of cracks in rock like brittle material under dynamic load are described in this paper.
本文主要论述了动荷载作用下岩石等脆性材料的断裂破坏机理、裂纹形成与扩展以及裂纹的止裂与控制等内容。
When the applied load exceeds the limit strength of the material as a result of parts breaking overload fracture.
当外加载荷超过材料强度极限而造成零件断裂称为过载断裂。
The observational result of crack fracture form for rock samples with close crack under unloading after the peak compression shear load.
介绍了对含闭合裂缝岩石试件在达到峰值压剪荷载时卸荷的裂缝断裂形态观察结果。
Sacroiliac joint complex is the hub transmission load of trunk and lower limb, unstable pelvic fracture always involves the sacroiliac joint injury.
骶髂关节复合体是躯干与下肢负荷传递的枢纽，不稳定型骨盆骨折常涉及骶髂关节损伤。
Lithology, rock stratum thickness, fracture process, structural stress field, local structure, stratum load and karst process are all main controlling factors for the development of the rift.
岩性、岩层厚度、断裂作用、构造应力场、局部构造、地层负荷与岩溶作用是控制裂缝发育的主要因素。
Results When continual stress got together to act on tibia bone which exceed its physiological load tibia bone will fatigue, then fatigued fracture will take place.
结果持续高强度应力积累作用于胫骨超过生理载荷能力时，即会出现胫骨疲劳，继而发生胫骨疲劳骨折。
The reasons causing the fracture in view of the load on the manipulator and the structure of the floating axis are analyzed and precautions for preventing fractures are stated out.
从揭盖机所承受的载荷及其运行机构浮动轴的结构两方面分析了浮动轴断裂的原因，并找出预防其断裂的措施。
Under given crack dimensions and load condition, to appraise to cracks defects with fracture appraisal program and obtained submarine pipeline failure appraisal diagram (FAD).
在给定裂纹尺寸与载荷条件下，利用断裂评定程序对一裂纹缺陷进行了评定，得到了海底管线失效评定曲线(FAD图)。
Objective: To discuss the mechanism how the sacrum fracture happens under the dynamics clashing load.
目的：探讨骶骨在冲击载荷作用下发生骨折的机理。
The first one employs the fracture parameter, being the distance from the point of applying the indentation load to the specimen edge.
第一个采用了断裂参数，是距离的应用压痕负荷的标本优势。
Two types of load were applied to investigate the change of tooth fracture resistance after restored with MOD inlay.
目的：对直接树脂和间接树脂嵌体修复后牙体的抗力进行三维有限元研究。
The results showed that nonmetallic inclusions in weld seam served as crack initiation site under external bend load, and large amount of m a structure resulted in cleavage fracture of weld seam.
结果表明，焊缝金属中存在的非金属夹杂物，在低应力作用下形成微裂纹成为裂源，加之焊缝组织中存在大量的MA结构群，从而发生焊缝金属在室温下的解理断裂。
The pelvic bolster is designed to bend but not fracture under load, thus maintaining a continuous loading curve.
骨盆目的是加强而不是弯曲载荷下断裂，从而保持持续的负荷曲线。
In addition, the crack propagation and fatigue damage of CSP under wind load in the case of the material which have initial crack have been analyzed using fracture mechanics method.
此外，还运用断裂力学方法分析了材料有初始裂纹的管道在风荷载作用下的裂纹扩展及疲劳损伤。
To evaluate fracture instability, the total sum of stresses due to residual welding or rolling stresses, dead load, and live loads must be considered.
计算断裂失稳性时，必须考虑焊接或轧制残余应力，恒载应力和活载应力之总和。
The results show that the characteristic of acoustic emission is closely related to the load variation or the deformation fracture of rock.
结果表明，声发射与载荷变化或岩体变形破裂密切相关。
The cement samples damage and fracture by exploding load was studied by experiment and numerical simulation method.
从实验和数值模拟两方面对爆炸载荷对水泥试样的损伤破坏进行了研究。
Objective to study the crack initiation and fracture of porcelain-fused-metal (PFM) crown under monotonic load by means of experimental techniques.
目的研究烤瓷熔附金属冠中央窝受单调递增静态载荷下的裂纹产生和破坏形式。
Aimed to the fracture behavior before peak load, the rock fracture stability determined by fracture curves after peak load has been studied.
以岩石断裂峰值后曲线为岩石断裂稳定性研究内容，提出了裂纹扩展本构曲线的概念和判断岩石断裂稳定性的方法。
Through observation and analysis of metal organism after explosive load experiments, fracture mechanisms of the mild steel and Si-Mn steel materias were specially studied.
通过爆炸加载试验观察分析其金相组织，研究低碳钢和硅锰钢材料的裂纹生成、扩展和断裂机制。
Under shock load conditions the peak load can exceed the ultimate bending strength of the core material and fracture occurs, usually at the most highly stressed cross section area.
在冲击负荷下，最大负荷超过了轧辊芯部材料所能承受的最大抗弯曲负荷，发生截面断裂。断裂一般产生于负荷应力为最大的截面。
RESULTS: The load-sharing score of a fracture increased with the level of impact energy.
结果：骨折后的载荷评分随着能量的增加而增加。
RESULTS: The load-sharing score of a fracture increased with the level of impact energy.
结果：骨折后的载荷评分随着能量的增加而增加。
应用推荐