These fundamental solutions may be applied to linear elastic fracture analysis and consequently they provide a new and effective approach to solve this kind of problem.
这些基本解可以用于线弹性断裂分析，为求解这类问题提供了新的有效途径。
It has been proved by means of fracture analysis.
它已为断裂分析方法所证实。
The validity of the results of linear elastic fracture analysis, when the plastic regi…
讨论了有塑性区存在时，由线弹性分析所得结果的适用程度。
The validity of the results of linear elastic fracture analysis, when the plastic region exists, i…
讨论了有塑性区存在时，由线弹性分析所得结果的适用程度。
The sliding crack model has been widely applied in the damage and fracture analysis of the rock-like materials.
滑动裂纹模型被广泛应用于岩石类材料压剪断裂分析及损伤分析。
In engineering fracture analysis, random boundary imperfections as notches or cracks are common and important.
在工程断裂分析中任意边界缺陷如缺口或裂纹群是常见和重要的情况。
Tensile testing, fracture analysis, microstructure analysis, hardness test were carried out on the welded joint.
对焊接接头进行了拉伸强度测试、断口分析、金相组织分析、显微硬度分析。
By the fracture analysis and metallographic analysis, we obtained the spall fracture mechanism at different strain rate.
对回收的样品进行了断口分析和金相分析，从宏微观角度分析了无钴合金在不同应变率下的断裂机制。
Those equations are very important and useful for engineers doing fracture analysis or experiment studies in composites…
这些公式对工程师们在复合材料结构的研究中进行断裂分析或实验研究是非常重要而有用的。
The fracture analysis was made by means of microstructure, macrostructure, SEM, chemical composition, stress measurement and calculation.
采用宏、微观、扫描电镜、化学分析、应力测定及计算等方法对断裂螺母进行了分析。
Mechanical properties of composite PP were tested, and also fracture analysis, XRD analysis; DSC analysis had been done to the composite PP.
对PP复合材料进行力学性能测试、断口形貌观察、XRD结构分析、DSC热分析等分析。
Based on the fracture site investigation and macro-rod fracture analysis, the welding rod fracture occurred in the vicinity of the weld fusion line.
通过对最近的一次断裂拉杆现场调查和宏观断口分析，发现断裂发生在拉杆的补焊焊缝熔合线附近。
In this paper, the chemical contents, microstructure, inclusion, grain size and fracture analysis of the second grade gas turbine blade were investigated.
对燃气轮机二级动叶片失效件进行了化学成分分析、金相组织观察、晶粒度测定、夹杂物检查及断口分析。
The research methods and main conclusions of FGMS fracture analysis are reviewed from the aspects of asymptotic fields near the crack tip and crack expansibility.
从裂纹尖端应力场和裂纹扩展两个方面，阐述了功能梯度材料弹性断裂分析的研究方法和主要结论。
This paper dealt with tensile damage of the reinforced PTFE through detecting by acoustic emission technique and fracture analysis with scanning electron microscope.
采用声发射技术监测填充聚四氟乙烯的拉伸损伤过程，结合扫描电镜进行断口分析。
Fracture mechanics. A technique of fracture analysis used to determine the stress level at which preexisting cracks of known size will propagate, leading to fracture.
一门断裂分析技术，用于确定已知尺寸的预先存在裂纹扩展并导致断裂的应力水平。
The study results could be used in the probability fracture analysis and construction quality control of interface between coarse aggregate and hardened cement mortar.
通过断裂韧性分布特性的研究，将为粗骨料与硬化水泥浆体界面概率断裂分析与施工控制提供了参考依据。
In the elastoplastic fracture analysis for pipelines steel X60, J-A2 two parameter approach was adopted to predict the failure pressures of pipelines with surface cracks.
在对X60管钢弹塑性断裂分析中，采用J - A2双参数方法来预测带表面裂纹管道的破坏压力。
The impact test and SEM fracture analysis were carried on for AZ80 magnesium alloy after different temperature ageing, and the effects of ageing on impact property were investigated.
采用冲击试验和断口形貌分析对经不同温度时效处理后的AZ80镁合金冲击性能进行了分析。
The fractal geometry and its application in fracture analysis are discussed in this paper. Problems existing in this area and possible approaches to the problems are also put forward.
论述了分形几何的方法及在断口分析中的应用，提出了该领域存在的问题及应努力的方向。
Some in-site vibrating test and metal fracture analysis have been done to reveal that the crack of the U-shaped bolts is fatigue failure and some reference for designer is put forward.
结合桥梁—人行道系统的现场振动测试和螺栓试样断口分析结果，指出既有桥上发生的U型螺栓破断属于疲劳破坏，并提出了改进意见。
The reason of the Weld Joint Cracking on high frequency welding pipe was investigated by using macroscopic observation, metallographic technology, fracture analysis and EBSD technology.
本文通过使用宏观观察、金相分析、断口分析和电子背散射衍射（EBSD）等分析手段对高频焊管焊后弯管开裂的原因进行了分析。
Based on the latest research fruits, methods and main conclusions of FGMS fracture analysis are reviewed from the aspects of asymptotic fields near the crack-tip and crack expansibility.
结合最新研究成果，从裂纹尖端应力场和裂纹扩展两个方面，阐述了功能梯度材料弹性断裂分析的研究方法和主要结论。
The cracking causes of the die casting mould of SKD61 steel were analyzed by chemical composition analysis, mechanical property testing, microstructure examination and fracture analysis.
通过化学成分分析、力学性能测试、金相检验以及断口分析等方法对SKD61钢压铸模具开裂原因进行分析。
By fracture analysis, this report presents the main causes for fracture failure of the crankshaft on overhauled Z12V190B diesel engines and puts forward some appropriate protective measures.
本文主要通过断口分析，找出了Z 12v190 B型柴油机大修后导致曲轴断裂失效的主要原因，并提出了相应的改进措施。
The analysis of automobile engine crankshaft was conducted by macroscopic examination, fracture analysis, chemical composition analysis, metallographic examination and mechanical properties test.
通过宏观分析、断口分析、化学成分检验、金相检验和力学性能检测等方法，对汽车发动机曲轴断裂原因进行了分析。
In this article, the fracture analysis on mode I crack of orthotropic functionally gradient materials is studied, under which the elastic constants changed exponentially along thickness of the plate.
文章对含i型裂纹的正交各向异性功能梯度材料板沿其板厚的弹性常数表达式呈指数函数变化时的应力-应变场进行分析。
Fracture analysis of screw fastener was carried out by means of metallography and scanning electron microscope.
采用光学显微镜、扫描电镜等测试手段，对断裂紧固螺钉进行了分析。
Fracture analysis of the fan shaft was made by observing macroscopic and microscopic appearances of the crack, and examining micro hardness and chemical composition of the material.
通过观察断裂风机轴裂纹宏观和微观形貌，检验化学成分、显微硬度等方法对风机轴断裂的原因进行了分析。
Fracture analysis of the fan shaft was made by observing macroscopic and microscopic appearances of the crack, and examining micro hardness and chemical composition of the material.
通过观察断裂风机轴裂纹宏观和微观形貌，检验化学成分、显微硬度等方法对风机轴断裂的原因进行了分析。
应用推荐