Elaborates the Barke code recognizer's design and FPGA realization.
阐述巴克码识别器的设计与FPGA的实现。
It proposes a dynamically reconfigurable FPGA realization model of the BP network.
本文最后提出了一种可动态重构的BP网络的FPGA实现模型。
This article mainly introduces the pixel filling algorithm in pixel-processing-unit in CIG system and its FPGA realization technique.
主要介绍了CIG象素处理中象素填充的算法及其FPGA实现技术。
This paper introduces the design and realization of a high-speed and low-cost virtual logic analyzer based on FPGA and USB2.0 bus.
本文介绍了一种基于FPGA的USB2.0高速、低成本的虚拟逻辑分析仪的设计原理与实现方法。
In system each interface logic control and image preprocess are implemented by FPGA, so the design of FPGA's internal logic and algorithms realization in FPGA is the focus of this article.
系统中fpga实现各种外围逻辑控制和图像预处理算法，FPGA的内部逻辑设计和算法实现是本文讨论的重点。
In this paper, we described the principle and realization of multi function modulation platform on the basis of AD9854 and FPGA.
给出了利用AD 9854与FPGA器件实现多功能调制的原理及实现方法。
The results indicate that the realization of this technique on color array display panel can be obtained by FPGA device easily, improving the horizontal resolution from 384 to 1 152.
仿真结果表明：FPGA设计的控制电路，能够在阵列型彩色平板显示器件上实现超分辨率显示，水平分辨率由原来的384提高到1 152。
The structure of the high-speed BER testing instrument is introduced. The application of FPGA in the instrument and the realization of FPGA are expounded.
简述了FPGA在高速位误码率测试仪中的应用，对误码率测试仪的结构，及其FPGA实现进行了详细的介绍。
The realization of direct digital synthesizer (DDS) by FPGA based on the principle of fraction division is introduced.
采用现场可编程门阵列（FPGA）基于小数分频器的原理，实现直接数字式频率合成器（DDS）。
This paper introduces the work principle of MP3 players, and introduces the design thoughts and realization based on FPGA.
介绍了MP3播放器的工作原理，并介绍了基于现场可编程门阵列（FPGA）器件的设计思想和实现。
In the paper, based on the FPGA chip, the realization and optimized design of the elliptic curve cryptography are studied.
本文主要对基于FPGA芯片的椭圆曲线密码算法的实现及优化设计进行了研究。
The thesis presents the design and realization of a data synchronous acquisition system in integrated protection based on FPGA and digital frequency multiplying technique.
本论文的任务是设计并实现基于FPGA及数字倍频技术的集成保护中数据同步采集系统。
The third chapter illustrates the significance of realization of GPIB controller with FPGA chip.
在第三章，详细阐述了用FPGA芯片实现GPIB接口的意义。
Secondly, ECNUX platform supports parallel operation, and FPGA has the ability of running in parallel, so the realization of FFT running in parallel is another key problem solved in this paper.
其次，ECNUX平台支持并行操作，并且FPGA也具有并行能力，所以实现并行fft算法是本文解决的另一关键问题。
In the last chapter, a realization of the algorithm based FPGA is introduced, by simulating and testing, it is verified its performance and value in engineering application.
本文的最后介绍了该后处理算法基于FPGA的实现方法，通过仿真和测试，验证了其性能和工程应用价值。
Then, the thesis discussed the proceeding of the simulating channel part, digitally sampling module, FPGA logically controlled module and AD/DA module, including their chips, realization and notice.
接着，分别介绍了模拟通道部分、数字取样模块、FPGA逻辑控制模块及数模转换模块，包括它们的芯片选择、实现方法和注意事项等。
The realization of an angular position feedback circuit based on FPGA is presented in this paper.
介绍了基于FPGA器件的角度位置反馈电路的具体实现方法。
This paper discussed the principles of digital if and the realization on FPGA, and the test results were given to verify the performance of the system.
本文详细讨论了数字中频的原理以及在FPGA上的实现，最后给出了测试结果，验证了系统的性能。
This paper mainly discusses the realization of decision feedback equalizer and its design realization in FPGA as well.
本文主要讨论了判决反馈均衡器的实现方法，及判决反馈均衡器在FPGA中的设计实现。
Data computing systems, the main parts of the portable calculator design and realization, using TMS320C32 floating-point DSP, and FLEX EPFIOKIO FPGA constitute a dual controller architecture.
数据计算系统，主要对手持计算器部分进行设计和实现，采用TMS320C 32浮点DSP和FLEXEPFIOKIOFPGA构成双控制器结构。
The concrete realization of the logic module , configurable file downloading module and device drivers module which load FPGA reflection are mainly introduced. The result of the system is also tested.
主要介绍了逻辑生成模块、配置文件下载模块及FPGA映像装载设备驱动模块的具体实现，并对系统的运行结果给出了测试。
As the aspect of hardware, this articleparticularly discusses the schemes and circuits realization of some function modules, which include signal adjustment, A/D conversion and FPGA configuration.
在硬件方面，特别讨论了信号调理模块、模数转换模块、FPGA芯片配置等功能模块的设计方案和硬件电路实现方法。
This thesis using FPGA devices and VHDL hardware description language to completed the design and realization of USB equipment controller.
本文主要通过FPGA器件，利用HDL硬件描述语言，初步完成了USB设备控制器的设计和实现。
All digital Phase-Locked Loop frequency tracking and digital SPWM realization technology based on FPGA are emphasized in the research.
重点研究了基于FPGA的全数字锁相环频率跟踪技术和数字化SPWM实现技术。
Traditional Lag-Lead synchronous DPLL shortcomings slow. In order to solve this problem, proposed a method for FPGA-based realization method of fast bit synchronization.
针对传统超前-滞后型数字锁相环实现同步速度较慢的缺点，提出了一种基于步进和量化调整的数字锁相法的快速位同步方法。
The basic principle of blind equalizer, the design of GSA blind equalizer and its realization with FPGA are discussed in this paper.
本论文论述了盲均衡器基本工作原理、GSA盲均衡器设计及其FPGA的实现过程。
The design scheme which USES FPGA as the main controller is presented in detail, including the internal interface of SDRAM, process of data transmission and realization of ping-pong operation.
详细介绍了以FPGA为主控器的设计方案，包括SDRAM内部接口设计、数据传输过程以及乒乓操作的实现方法。
The article introduces a unique hardware realization, which utilizes less-foot, low-cost and easy-to-get logistic interfaces, as PAL, CPLD or FPGA.
本文介绍了一种特殊的硬件实现方法，使用了管脚少、成本低、容易得到的逻辑接口器件，例如可编程逻辑阵列（PAL）、可编程逻辑电路（CPLD）或者FPGA。
PCI target interface controller design with FPGA is proposed. And the realization of the complication of the access sequence to the BUS interface controller is expressed by sequence state machine.
给出了一种基于FPGA实现PCI总线目标模块接口控制器的设计方案，用时序状态机来实现总线访问操作复杂的时序。
The converting of STM1 signal from serial into parallel by FPGA is introduced in this paper. The difficulty of realization and test results is discussed.
介绍了用FPGA实现串行stm - 1信号到并行的转换，讨论了技术难点和测试结果。
应用推荐