The paper introduces the design of digital clock based on FPGA and VHDL, the time of clock can be displayed with the digital driving circuit.
介绍了利用VHDL硬件描述语言结合FPGA可编程器件进行数字钟的设计，并通过数码管驱动电路动态显示计时结果。
A design method of a driving circuit for flat panel display based on FPGA is introduced.
介绍了一种基于FPGA的平板显示器件驱动电路的设计方法。
Lastly, the hardware circuit, VHDL program design and debugging methods based on FPGA are discussed.
最后对基于现场可编程门阵列(FPGA)的硬件电路、VHDL语言程序设计及调试方法进行了讨论。
Firstly, the paper introduce the basic flow of Digital Circuit system design based on FPGA and the body content of RDSP (Radar Digital Signal Processing) .
本文首先介绍了利用FPGA设计数字电路系统的流程和雷达数字信号处理的主要内容。
FPGA is widely used in Application Specific Integrated Circuit (ASIC) because of its design flexibility and high speed.
由于用户现场可编程门阵列(FPGA)设计灵活，速度快，在数字专用集成电路(ASIC)设计中得到广泛的应用。
We focus on the carrier synchronization method, the circuit and its parameters design, the performance simulation and the circuit implementation in Field Programmable Gate Array (FPGA).
重点研究载波同步方法，设计电路及参数，仿真同步性能，并在现场可编程门阵列(FPGA)上实现同步电路。
This text introduced the design by FPGA to the Hamming distance by calculating circuit method.
介绍了一种利用FPGA设计汉明距离的电路方法。
Using FPGA to design driving circuit is succinct, the control module can be changed if the actual demand is changed.
用FPGA设计驱动电路，可以根据实际功能任务需求，定制显示控制功能。
This paper introduces the design and implementation of ventilator control system based on FPGA including principle and electric circuit.
本文详细介绍了基于FPGA的呼吸机控制系统的设计和实现，包括原理和电路结构图。
This paper introduces in detail the design and implementation of ventilator SPONT control chip based on FPGA, including principle and electric circuit.
本文详细介绍了基于F PGA的呼吸机SPONT 模式控制芯片的设计和实现，包括原理和电路结构图。
FPGA can be widely used in many fields, especially Wireless communication field, more and more many engineer chooses FPGA when carrying out the design of digital integrated circuit.
FPGA技术在许多领域均有广泛的应用，特别是在无线通信领域里，越来越多的工程师在进行数字集成电路的设计时选择fpga。
Around the ARM and the FPGA core, a detailed analysis of the peripheral circuit functions of each module are given. And based on it, the circuit design of each module is completed.
围绕ARM和FPGA核心芯片，详细分析了外围电路各模块的功能，在此基础上完成了各模块的硬件电路设计。
Because using FPGA to design electronic circuit have the advantage of short time and relative less fund, and can make product as electronic circuit to product as CMOS chip.
这是因为采用FPGA设计电子电路不仅开发时间短，资金投入相对少，且可将电路板级产品集成为芯片级产品。
The paper introduces a design of PWM control circuit based on FPGA.
本文提出了一种采用现场可编程门阵列器件（FPGA）实现PWM控制电路的方案。
The hardware design of detection system includes the core circuit of FPGA;
检测系统的硬件设计包括FPGA核心电路的设计；
This paper discusses in detail the different parts of the system hardware circuit, single chip computer, FPGA design, software programming and top-down design methods and so on.
本文详细论述了系统各部分硬件电路组成，单片机和FPGA的软件编程设计以及自上而下的设计方法。
Design circuit for SoC (System on Chip) design verification in FPGA prototype phase and product phase.
设计电路用于片上系统的设计验证，包括FPGA原型阶段和产品阶段。
A reconfigurable Hardware Platform Based on SOC Design for Digital Protective Relay is presented. It combines the FPGA and the Flash MCU and related interface circuit.
文中提出了基于SOC的可配置微机保护硬件平台的设计方法和具体实现，该平台由FPGA和微处理器以及相关接口构成。
The applicATion of FPGA is an effective way in the modern electronics circuit design, and it can enhance the effect and reliability of design so as to the integrATion as well.
可编程逻辑器件的应用成为现代电子电路设计中的高效方式，它可以实现高效率、可靠的设计，也可以进一步提高电路的集成度。
This article introduces that in a new design of radar raster-displaying terminal, SDRAM is used as video frame memory and FPGA is adopted to carry out the process of control circuit.
SDRAM作为雷达光栅显示视频帧缓冲存储器，通过FPGA器件实现对SDRAM的控制，已成功应用于一款雷达光栅显示终端。
The thesis expounds the cell design and timing design of the FPGA circuit in main controlling and baseband signal processing module, and develops the hardware of it, and programs part of the software.
本人参加了上述第一个项目软件无线电系统的整体设计，完成了主控与基带信息处理模块的硬件设计、部分软件设计调试，以及第二个项目的主控与基带处理单元模块的调试、最终完成整机调试和指标测试。
The thesis expounds the cell design and timing design of the FPGA circuit in main controlling and baseband signal processing module, and develops the hardware of it, and programs part of the software.
本人参加了上述第一个项目软件无线电系统的整体设计，完成了主控与基带信息处理模块的硬件设计、部分软件设计调试，以及第二个项目的主控与基带处理单元模块的调试、最终完成整机调试和指标测试。
应用推荐