• Risk spot analysis is conducted on powder making system in boiler operation and welding operation in boiler examining and repairing and some control measures are put forward.

    分别对锅炉运行中的锅炉制粉系统和锅炉检修中的焊接作业进行危险点分析,提出了控制措施。

    youdao

  • According to the characteristic of magnesium alloy, some effective welding technics were put forward.

    针对镁合金焊接的特点,提出了有效的焊接工艺。

    youdao

  • Based on the through the arc sensing method, a method is put forward to recognize the disturbance information of gas metal arc welding (GMAW).

    基于电弧传感的检测方法,提出了一种识别GMAW焊接过程干扰信息的方法。

    youdao

  • With the detailed repairing scheme, a dissimilar steel welding technique about 45 steel and 20 steel under the condition of temperature and sharp cooling is brought forward and gets success.

    提出了在室温急冷的条件下,45钢与20钢异种钢焊接的工艺措施,并取得成功。

    youdao

  • The flame normalizing treatments were put forward on steel rail with flash welding, gas pressure welding and aluminium heat welding.

    对钢轨闪光焊、气压焊和铝热焊进行火焰正火处理,并进行正火、未正火接头和钢轨母材的金相组织以及力学性能的对比。

    youdao

  • Base on IGBT inverter for arc welding, a new current wave form control method is put forward in this paper which is special for process of short circuit transfer for CO2 arc welding.

    本文针对IGBT弧焊逆变器,提出并实现了适于短路过渡CO_2气体保护焊的输出波形控制方法。

    youdao

  • The analysis outcome indicates that the shell-to-solid submodeling is basically feasible for this task. So, a new way is brought forward for the analysis of the welding influence on constructions.

    分析结果表明,该方法基本是可行的,从而为结构的焊接影响分析提供了一个新思路。

    youdao

  • In this paper, a new filling strategy for multi pass welding, which can be used in robotic welding, is put forward.

    提出了一种可用于机器人焊接大型V形焊接接头多道焊填充策略。

    youdao

  • Three measures to solve the problems of boundary effect in explosive welding are put forward and their application conditions, advantages and disadvantagess ave illustrated respectively.

    提出了解决爆炸焊接中边界效应问题的三条措施,并说明了各自的适用条件和优缺点。

    youdao

  • The paper studied and analyzed the interface wave of clad plate explosive welding used average arranging explosive, then put forward the new technology of unequal thickness arranging explosive.

    通过对均匀布药工艺下爆炸焊接复合板的界面波形进行理论分析,提出不等厚度布药的新工艺。

    youdao

  • A practicable method was put forward to solve the possible problems in course of welding.

    针对薄铝管焊接过程中容易出现的问题提出了可行的解决方法。

    youdao

  • According to the arc light features of pulsed TIG welding and its effects on vision measurements, a special method of image capturing and controlling is put forward.

    根据脉冲tig焊接电弧的弧光特性及其对视觉检测的影响,提出了一种独特的图象采集和控制方法。

    youdao

  • This paper makes a systematic analysis on the defects of the sphere which easily happen in the course of erecting and welding and puts forward some corresponding control measurements.

    文章对球罐在安装焊接过程中易产生的缺陷进行了系统的分析,并提出了相应的控制措施。

    youdao

  • The technological process of flash welding and the characteristic of electricity control are analyzed. The control plan with PLC, ladder diagram and the program are put forward.

    分析了闪光对头焊工艺过程和电气控制特点,提出采用PLC控制方案,给出了控制系统梯形图及程序。

    youdao

  • Being aimed at distortion of side plate for welding case of electronic equipment, this paper puts forward a new method to straighten distortion by using resistance heat which produced by spot welding.

    本文针对焊接机柜加工中产生的侧板波浪变形,提出了一种运用点焊产生的电阻热来矫正变形的新方法。

    youdao

  • Meantime it finds out property change reason of coarse crystal area from welding coarse crystal area structure change and puts forward the direction of toughness.

    同时,还从焊接粗晶区组织变化中找出了粗晶区性能变化的原因,并提出了韧化方向。

    youdao

  • An inputting model of welding symbol information is put forward in this paper.

    本文提出了一种焊缝标注信息输入模型。

    youdao

  • The article analyzes exist quality problems on national turbine welding diaphragm, also puts forward practicable methods.

    针对国产汽轮机焊接隔板焊接质量存在的问题,分析产生问题的原因,并提出解决办法。

    youdao

  • Through probing into the current waveform control of CO2 welding, one method of short transition is put forward.

    通过对CO_2焊的电流波形控制方法探讨,提出了适合于CO_2焊接过程的短路阶段和燃弧阶段的控制策略。

    youdao

  • The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper, and its control system is set up.

    提出了CO2气体保护焊短路过渡的和谐控制思想,并建立了相应的控制系统。

    youdao

  • In this article an analysis is made on cracking reasons of the straight tube and a palm welding and the relative prevention measure is put forward.

    文章分析了直管对接焊缝开裂和掌形管开裂的原因,并提出了相应的防护措施。

    youdao

  • Based on the special weldability of big diameter stainless steel pipe complete welding, puts forward the more reasonable welding process and operational method.

    大直径不锈钢管的全位置焊接,根据其特殊的焊接性,提出较合理的焊接工艺和操作方法。

    youdao

  • A new view of characteristic zone of fusion welding joint is put forward through observations and researches of many fusion welding joints.

    通过大量的熔化焊接头试样的观察和研究,提出了熔化焊接头特征区域划分新方案。

    youdao

  • This article puts forward to lay a cover plate in the welding of the titanium sandwich pressure vessel and it also presents the structure and welding practice of the cover plate.

    文章提出了在钛复合板压力容器的焊接中采用盖板敷设焊接,并具体介绍了盖板的结构及其焊接方法。

    youdao

  • In order to overcome the difficulty of heavy cover plate installation with two times of welding, a welding procedure finished cover plate welding at one time is put forward.

    针对采用“两次拼焊工艺”拼焊大型盖板存在的问题,提出了“一次拼焊”工艺。

    youdao

  • Aimming at the safety of welding of long-distance pipeline, this paper analyzes the hazardous substance of welding process, and puts forward the relevant precautionary measures.

    针对长输管道焊接过程出现的安全问题,分析了焊接过程中的有害因素,并就相关有害因素提出了防范措施。

    youdao

  • Based on the analysis of the weldability of T91 steel and combining the practical experience of power plant, the welding technology of T91 and high-temperature superheater header was put forward.

    在分析t 91钢焊接性的基础上,结合电厂实践经验,提出了将T 91管材直接与联箱焊接的工艺措施。

    youdao

  • In this paper, the defects appeared in flash butt welding for HSS cutting tools have been analyzed. And the effective resolving way has been put forward.

    本文对高速钢刀具闪光对焊经常出现的主要缺陷问题进行了具体分析,并提出了有效的解决措施。

    youdao

  • A new double single-ended forward arc welding power inverter with IGBT as power device and current PWM controller is introduced in this paper.

    提出了一种新型的双重单端正激式弧焊逆变电源,采用IGBT为开关器件,引入了电流型脉宽调制控制器。

    youdao

  • A new double single-ended forward arc welding power inverter with IGBT as power device and current PWM controller is introduced in this paper.

    提出了一种新型的双重单端正激式弧焊逆变电源,采用IGBT为开关器件,引入了电流型脉宽调制控制器。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定