Numerical simulation result shows that this method can be used for rapid evaluation of sheet metal forming process design and for the optimization of process parameters.
实例证明，一步模拟法可用于板料成形工艺方案的快速评价及参数优化。
Numerical simulation shows that FE inverse approach can be used for rapid evaluation of sheet metal forming process design and for the optimization of the process parameters.
分析计算实例表明，逆算法可用于对板料成形工艺方案进行快速评价，对冲压工艺参数进行优化。
Therefore, it is significant to study the forming process of design knowledge and put it in computer simulation.
因此，研究设计知识的形成过程并实现计算机模拟，具有重大的意义。
The liquid-position sensor working principle of brake-used oil tank, structural design of floater products, mold design, foam material as well as foam forming process are introduced.
介绍了刹车油箱液位传感器工作原理、浮子产品结构设计、模具设计、发泡材料用料、发泡成型工艺等方面内容。
From this forming process, we realize that the clothing symbols characteristic enables to utilize in the modern clothing character design.
从这一形成过程中认识到服装符号的特性，使之可以运用到现代的服装符号设计中去。
Analyzed forming process of the fixed frame in automobile steering system, mainly introduced side hold punching die structure design.
分析了汽车转向系统中固定架的成形工艺，主要介绍了冲侧孔的模具结构设计。
In this paper, critical technology and forming process of platform plate mould design are stated by way of platform plate products.
以大型平台板产品为例，介绍了矿用大型平台板模具设计中的关键技术及成形工艺。
The forming technology of skin-cooling high pressure turbine was analyzed, introduced polyurethane bulging die structure design and the working process and die debugging improvement.
分析了高压涡轮冷却外壳的成形工艺，并介绍了聚氨酯胀形模的结构设计和模具工作过程以及模具调试改进。
The forming process of TPU was discussed and both the mould design and manufacturing method were introduced in this article.
分析了TPU(热塑性聚氨脂材料)的成型工艺，并详细介绍了TPU注射模的设计和制造方法。
This paper proposes that: the deformation in stamping design prefabricated hole forming specific height fittings first tee is feasible, but needs to process parameter optimization.
本文主要研究以冲压变形规律设计的预制孔管件一次成形特定高度的三通管是可行的，但需对工艺参数优化。
The forming process by cold extrusion for the hood pedestal of the auto air_conditioner compressor and the design of the cold extruding die were introduced.
介绍了车用空调压缩机罩体支架的冷挤压成形工艺及冷挤压模具设计，采用工艺试验的方法确定挤压坯料尺寸。
Preform design in bulk metal forming is the central task of bulk metal forming process and die design.
金属体积成形预成形设计，是材料多工序成形工艺与模具设计的中心工作。
The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.
对车架冲压件的成形工艺进行了分析，并详细介绍了模具结构及其设计过程。
Introduced forming process and die structure design of the support dish, putf orward the reasonable solution for the forming process arrangement and die design.
介绍了支承圆盘零件的成形工艺及模具结构设计，对工艺程序安排和模具结构设计提出了合理的解决措施。
Introduce the design of a cold-bending machine forming craft and working process of cutting for wire slot products.
介绍了护线槽产品的冷弯机械成形工艺的设计及切断的工作过程。
All above make it possible to optimize the bulk forming process and the die design in respect of decreasing forming force and saving material.
从而为变形力、变形功与节省材料的角度优化设计体积成形工艺及模具找到了有效途经；
The deformation and flow of metal in the process of roll forging are much different from those of ordinary die forging, So are the design of its technology, preliminary forming dies and dressing dies.
辊锻过程中金属变形及流动，与一般模锻工艺相比存在较大的差异，因而其工艺设计及初成形道次模具、整形模具设计也不同于常规模锻工艺。
According to the push-iron structure of die for the sheet metal product, introduced the forming process and the typical die design method, and the working principle was introduced, too.
针对常见板金产品模具中的推平结构，介绍了其成形工艺及模具典型结构设计方法，并介绍了模具工作过程。
Analyzed the forming process of the cover plate, introduced the layout design, and expound design and manufacture process of die structure and its main components.
分析了盖板零件的冲压成形工艺，介绍了零件排样设计方案，阐述了模具结构及其主要零件的设计和制造工艺。
And the scoop channel width to the forming process quality influence rule is concluded. Also there is reference value for the engineering design.
并探讨了凹槽宽度对成形过程质量的影响规律，为工程设计提供了参考价值。
The addendum surfaces are very important for the product quality in sheet forming process, but their design is very time-consuming and requires tedious trial-error corrections.
板料成形过程中工艺辅助面对成形件质量有着重要意义，但其设计非常费时并且需要根据实验和数值模拟结果不断修正。
Based on the forming principle of stranded wires helical spring and the current problems in the manufacturing process, a new design scheme for the number control machine is put forward.
针对多股螺旋弹簧成型原理，及成型过程中存在的问题，提出多股簧数控机床新型的设计方案。
The design of auto-body forming process commonly includes edge un-wrapping, choice of drawing direction, roughcast reckoning, design of addendum, adding the binder surface and setting the draw bead.
覆盖件拉延工艺的设计一般包括以下内容：翻边展开、拉深方向选择、坯料估算、工艺补充面的搭建、压料面的添加以及拉深筋的布置等等。
The whole structure and working process of the die were stated, and the main points for die design and manufacturing were listed to obtain high forming quality.
阐述了异形垫圈冲裁成形复合模具的整体结构及其工作过程，为保证异形垫圈冲裁成形的质量，指出了复合模具设计和加工应注意的要点。
Moulds of each process is designed in light of the process optimized, and introducing the mould structure of the forming mould and side punch mould for trimming, and the design of key pieces.
根据所确定的工艺方案对各工序模具进行设计，并介绍了成形模和修边侧冲孔模的模具结构以及关键零件的设计。
The emphases of the structure characteristics of the motor shell and formation for heater unit are analyzed. The key point of forming process and mould design is further described.
介绍了暖风机电机机壳的结构特点及成形的重点，分析了成形工艺及模具设计要点。
A new forming process for tapered suspension coil spring of Audi passenger car is introduced, and the technique and key points the design of the new process are also analysed.
介绍了奥迪轿车变截面悬架螺旋弹簧棒料成形新工艺，对新工艺方案和设计要点进行了分析。
Numerical simulation of sheet metal forming has become a useful tool to evaluate process feasibility and find out forming defects, and has been applied in stamping die design for automotive panels.
板料成形过程模拟技术可以评价工艺可行性和预测缺陷，广泛应用于汽车覆盖件模具设计中。
The article introduces the powder metallurgy mold design and size count of forming spares, besides, it analyse working process of miniature cylinder forming mold.
文章重点介绍了微型气缸的粉末冶金成形模的设计以及成形零件相关尺寸的计算方法，同时对微型气缸成形模的工作过程进行了分析。
Analyzed factors affected springback in beam bending forming, elaborated how to springback compensation in die design process, introduced the die working process.
分析了横梁压弯成形过程中影响回弹的因素，阐述了在实际模具设计过程中如何进行回弹的补偿，介绍了模具的工作过程。
应用推荐