The paper introduces the hinge mount forming process, designs forming die structure, and analyzes the die working process and main designing points.
分析了铰链支座的工艺性，详细介绍了级进模排样方案和总体结构，阐述了关键部件的设计计算方法。
According the laevorotatory helicoid structure characteristic of the stainless steel spiral plate, analyzed the forming process, and introduced forming die structure.
针对不锈钢螺旋板的左旋螺旋面结构特点，分析了成形工艺，并介绍了成形模具结构。
The forming technology and parameters for hot forging of the brass brake shield, and the structure and the working process of the die were introduced.
介绍了黄铜闸板热锻成型工艺和参数，还介绍了模具结构及工作过程，提出了在热锻过程中应注意的几个问。
Analyzed forming process of the fixed frame in automobile steering system, mainly introduced side hold punching die structure design.
分析了汽车转向系统中固定架的成形工艺，主要介绍了冲侧孔的模具结构设计。
Continuous extrusion technology and its die structure have been determined via stress analysis in extrusion forming and characteristics of material itself, with satisfactory effect in practical use.
通过挤压成形的应力分析，确定了连续挤压工艺及其挤压模结构，在实际应用中取得了令人满意的效果。
Analyzed the forming process of the cover plate, introduced the layout design, and expound design and manufacture process of die structure and its main components.
分析了盖板零件的冲压成形工艺，介绍了零件排样设计方案，阐述了模具结构及其主要零件的设计和制造工艺。
The forming technology of skin-cooling high pressure turbine was analyzed, introduced polyurethane bulging die structure design and the working process and die debugging improvement.
分析了高压涡轮冷却外壳的成形工艺，并介绍了聚氨酯胀形模的结构设计和模具工作过程以及模具调试改进。
The forming technology of balance weight cover of fork truck is analyzed. Die structure and working part design is also introduced.
分析了叉车平衡重后盖的成形工艺，介绍了模具结构及主要工作部分的设计。
The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.
对车架冲压件的成形工艺进行了分析，并详细介绍了模具结构及其设计过程。
Through analyzing the forming process of the parts, a new_conception and practical compound forming die with simple structure for floating slides was introduced.
通过对工件的成形工艺分析，介绍一种构思新颖巧妙，结构简洁实用的浮动滑块复合成形模具设计。
By bulging forming technology analysis of color kinescope shaded cover, die structure and main parts designs are introduced. Punch surface shape is also designed by surface equations.
对彩管荫罩零件进行张拉成形工艺分析，介绍了模具结构及主要零件设计，并运用曲面方程进行凸模曲面形状设计。
Introduced forming process and die structure design of the support dish, putf orward the reasonable solution for the forming process arrangement and die design.
介绍了支承圆盘零件的成形工艺及模具结构设计，对工艺程序安排和模具结构设计提出了合理的解决措施。
Die structure based on the process of forming small fillet radius is introduced, and deduced the formula according to the principle of volume invariably.
介绍形成小圆角半径的圆孔翻边模具的结构特点，按体积不变的原则，推导了计算公式。
A description has been made on a structure and principle of progressive die used on a general press for shear, upsetting and automatic feed used for forming small axial parts.
介绍了用在通用压力机上成形小型轴类零件的一种新型切断、冷镦自动送料连续模的结构形式、工作原理和设计要点。
Through analyzing copper bus-bar structure and forming process, designed a reasonable and highly effective bending die.
通过分析铜排结构及成形工艺，设计出了合理、高效的扭弯模具。
The forming technology of rear shock absorber cap is analyzed, and its drawing die, flanging die and spinning die structure are also introduced.
分析了后减震器帽的成形工艺，介绍了成形该零件的拉深模、翻边模以及旋压模具结构。
Extrusion forming and die designing of profiles are discussed in view of the structure of distribution die which can not be explained by traditional thinking mode.
从传统的思维模式无法解释分流模结构的角度出发，去探询型材的挤压成型和模具设计。
The work principle, die structure and typical part design of the new forming method of lateral holes on automobile hub have been introduced.
介绍了汽车轮毂侧孔成形新方法的工作原理、模具结构及典型零件设计。
Die structure was discussed through the analysis of forming process of high intension screw bolt and a set of hot upsetting tool was designed.
通过分析高强螺栓的成形工艺，对模具结构进行深入探讨，设计了一套热镦模。
Improving design method for die of column profile is introduced. Structure of die is more reasonable, its life is longer and shape forming is more instable after improving design.
介绍了立柱型材的改良设计方法，改良后的设计使模具受力结构更趋合理，模具寿命延长，型材成形更稳定。
Furthermore, the backboard die structure and forming technology principle of forming by combining positive and inverted directions are stated in emphasis.
并对正向与反向混合成形的后板模具结构、成形工艺原理给予重点阐述。
Acrroding to the characteristics of complex structure of the lock with each other piece of gear-box, analyzed the forming process project, introduced the typical die structures in forming process.
针对变速箱互锁块结构复杂的特点，分析了成形工艺方案，介绍了成形过程中比较典型的模具结构。
According to the push-iron structure of die for the sheet metal product, introduced the forming process and the typical die design method, and the working principle was introduced, too.
针对常见板金产品模具中的推平结构，介绍了其成形工艺及模具典型结构设计方法，并介绍了模具工作过程。
A forming method and its characteristics for a certain model of air-conditioner plate are introduced, as well as, die structure of each procedure and forming process are briefly stated.
介绍了某款空调后背一种成形工艺方法及特点，并对每道工序的模具结构、成形工艺进行了简要阐述。
The whole structure and working process of the die were stated, and the main points for die design and manufacturing were listed to obtain high forming quality.
阐述了异形垫圈冲裁成形复合模具的整体结构及其工作过程，为保证异形垫圈冲裁成形的质量，指出了复合模具设计和加工应注意的要点。
The paper has described the necking die structure and the forming process for shell bodies. If the necking die was changed, two necking process can be finished with a set of die.
介绍了壳体缩口模具结构及成形工艺，若对凹模加以更换，完全可以用一副模具完成壳体两次缩口成形。
Aimed at large arc shape frame, the die with once bending forming structure is designed, the working procedure is reduced, and the costs are lowed as well.
针对大圆弧形机壳，设计了一次折弯成形结构模具，减少工序，降低成本。
This paper mainly introduces structure and prinicipe of mouth bulging die for diffusion tube, calculation method of blank size and forming force, design technology of main work parts.
主要介绍扩散管胀口模具的结构与工作原理、毛坯尺寸及胀口力计算方法和主要工作部件的设计技术。
By bulging forming technology analysis of color kinescope shaded cover, die structure and main parts designs are introduced.
对彩管荫罩零件进行张拉成形工艺分析，介绍了模具结构及主要零件设计，并运用曲面方程进行凸模曲面形状设计。
PU rubber is used as forming part in die. It makes die structure concise.
在模具中应用了聚氨酯橡胶作为成形零件，使得模具结构简单。
应用推荐