In 1998, mass production of pressure sensors and force sensors was launched.
1998年，该公司开始大规模生产压力传感器和力传感器。
The calibration and experiment design of multivariate force sensors are discussed.
本文讨论多维力传感器的两个普遍性的问题：标定及其试验设计。
Made of foam and force sensors, Impress works with both touch and the intensity of pressure.
Impress由泡沫和压力传感器制成，利用触摸和压力密度来工作。
The test result shows that there are no any disturbances between the two integrated force sensors.
检测结果表明，两个集成在机械手中的力传感器互不干涉。
The research results show the force sensors can be constructed using amorphous alloy materials with high stress sensitivity.
研究结果表明具有大的应力敏感性的非晶带材料可用来制作力传感器。
If we look at technologies that are becoming available, certainly something that is very important are contact force sensors.
如果我们观察这些可利用的技术，在其中可以肯定的是接触压力传感器是非常重要的。
Proposes to measure the wrist force using the data fusion method according to output variance of finger force sensors on the gripper.
提出根据手爪上的多个指力传感器的输出变化，通过数据融合方法得到腕力的数值。
According to the finite element analysis result for the square silicon cup, the performances of the force sensors have been calculated.
根据方型硅杯形式的有限元分析结果，计算力敏器件的性能。
The loading structure, testing part and force sensors were all integrated on a single chip by bulk silicon technology and bonding process.
利用微机械体硅工艺及键合技术，把系统中的测试机构、加载机构以及力传感器集成在一个单一的芯片上。
Each of the joints on that arm contain high-resolution force sensors, which let it "feel" its way into tight Spaces without wrecking anything.
每一个在该臂关节含有高分辨率力传感器，这让他“感觉”的方式进入狭小的空间不破坏任何东西。
The gripper is one of the key components of space intelligent robot which integrates many sensors such as vision sensors, tactile sensors, force sensors, etc.
手爪是空间智能机器人的关键部件之一，它集成了视觉、触觉和力觉等多种传感器。
The test frame is measured by accelerometers, laser displacement sensors and force sensors. The time history curves are drawn to analyze the isolation effects.
测试采用加速度传感器、激光位移传感器以及力传感器进行测量，分析时程曲线，比较结构的隔震效果。
This system employs the pulling force sensors to detect traction force and USES capacitance running asynchronism motor with other parts to control traction force.
系统采用拉式负荷传感器检测牵引力度，用电容运转式异步电机及其配套装置来控制牵引力度。
Silicon micro -optical force sensors were also developed to study and optimize the geometry and operation procedure of the microinjectors and self-assembly positioning chip.
研制了硅微光学力传感器，并用来研究和优化显微注射器自组装定位芯片的几何结构和操作程序。
According to outputs of eight finger force sensors the grasping force of gripper is obtained using the multi-sensor data fusion technique based on the BP artificial neural network.
针对舱外自由移动机器人手爪，运用BP神经网络方法，对八个指力传感器的输出进行融合，得到手爪夹持力的大小。
PZT micro -force sensors were calibrated by bimorph and electronic balance in static state and by bimorph and charge amplifier in dynamic state, small signal was tested by amplifier.
采用双晶片探头和电子天平对PZT微力传感器进行静态力标定，进而利用双晶片探头和电荷放大器对PZT微力传感器进行准静态标定，微小信号检测通过锁相放大器来实现。
Then the techniques about actuators, micro displacement sensors, and micro force sensors were discussed and compared respectively as they were main parts in microscale mechanics testing.
阐述了微构件力学性能的研究现状与存在的力学性能参数表征问题，而后重点介绍了微构件力学性能测试中相关的驱动方式、微位移检测和微力检测技术。
Newer vehicles have dual-depth or dual-stage driver and passenger airbags and weight sensors that change the force of the airbag depending on occupant size, seat belt use and seat placement.
新型的交通工具有双深度或双阶段的司机和乘客气囊和重量感应器，根据乘员的大小、安全带的应用和座椅位置来改变气囊的力量。
The system could also interact with additional sensors to detect the level of force when the finger touches the screen.
不仅如此，当人手接触到触屏时，这套系统还可以检测出人手的按压力度。
These sensors feed data to force generators which cancel out vibrations as they arise in the frame of the helicopter.
当直升机的整体架构出现震颤时，这些传感器能得到信息从而强制发动机消除震颤。
Sensors can analyse the surface of materials and, using the amount of resistance they show, work out the force to apply to an object.
传感器可以分析材料的表面，利用其会产生的阻力来决定自己所用力道。
A new force sensing system of 6-dof parallel robot was proposed by integrating 6 pull-press sensors on the 6 linkages.
通过在6 -DOF(6自由度)并联机器人各个杆件上集成拉、压力传感器，组成了新型力感觉系统。
Universal tensile machine is a variety of specifications of the force value selection, and seven test speed sensors for users to facilitate the testing of different test conditions.
万能拉力实验机是多种规格的力值传感器以及七档试验速度选择，为用户不同试验条件的测试提供了便利。
Based on the new concept of calibration matrix, a method to calibrate the sensors automatically is proposed. The method is simple, and can eliminate the effects of error of load force completely.
在建立标定矩阵新概念的基础上，提出了一种传感器的自动标定的方法，其具有简单、快捷、准确，并能完全消除加载力误差影响等特点。
On the basis of the aiming principle of the atomic force probe a-long with 2D micro-displacement system and the high precision capacitive sensors , the micro-dimension measurement system is developed.
本文基于原子力微探针瞄准原理并结合二维微位移系统和高精度电容传感器，研制了微尺寸测量系统。
Secondly, the designing method of the gripper with multi-sensors is described in detail in this paper. The gripper can provide force, tactile and position information.
然后详细叙述了具有力觉、触觉及位移传感器的多感知机器人夹持器的设计方法。
Secondly, the designing method of the gripper with multi-sensors is described in detail in this paper. The gripper can provide force, tactile and position information.
然后详细叙述了具有力觉、触觉及位移传感器的多感知机器人夹持器的设计方法。
应用推荐