The shear strength of CFST columns was correlated to the axial force ratio and the shear-span ratio.
钢管混凝土柱的受剪承载力与轴压比、剪跨比有关。
Wall thickness of steel tube, concrete strength, shear-span ratio and axial force ratio were considered as test parameters.
试件参数包括钢管壁厚、混凝土强度、剪跨比和轴压比。
The main reason of the damage of the special-column is the strong shear force ratio, so it's important to control the shear force ratio of the joint.
剪压比过大是异形柱节点发生斜压破坏的根本原因，控制节点剪压比尤其是腹板剪压比具有重要的意义。
To increase component of grinding force ratio can increase principal stress extreme values in grinding stress field. Materials can be removed by brittle fracture.
粗加工中，增加磨削分力比可以增大磨削应力场中的主应力极值，有助于材料的脆性去除。
The grinding force ratio in grind-hardening consists with the grinding force ratio in grinding quenched steel, and is bigger than the grinding force ratio in grinding unquenched steel.
试验研究发现，磨削淬硬的磨削力比值范围与磨削淬火钢的磨削力比值范围相一致，大于磨削普通钢的磨削力比值范围。
The distribution of the fibers, the ratio of slow fibers to fast ones and their attachment and arrangement determine the speed and force with which each species can close its jaws.
肌纤维的分配方式，伸缩快速的肌纤维与伸缩慢的肌纤维的比例还有肌纤维的连接方式以及他们的位置分布决定了一种生物能以多快的速度和多大的力量来和尚他们的下颚。
More children would increase the dependency ratio until they were old enough to join the Labour force.
虽然生育更多的孩子，在他们达到工作年龄加入劳动力之前，“抚养比率”会上升。
Civilization is nothing else than the attempt to reduce force to being the ultimate ratio.
文明不是别的，就是尽量减少用武力作为最后的手段。
The design curves of equivalent damping ratio to the brace stiffness, and ratio of maximum damping force of the damping device to the inter-story yield shear force of the structure are proposed.
本文就消能减震结构设计参数，即消能部件的支撑刚度、层间最大阻尼力与结构层间屈服力比值等恢复力模型参数的选取进行了讨论。
The simple transmission setup, compact structure, low noises and higher force increase ratio could be reached easily by the mechanism.
该机构是一种传动简单、结构紧凑、噪音小、增力比大且易于实现的驱动机构。
Based on the tests and theoretic derivation, skeleton curve of restoring force model of frame column with high axial compression ratio is got.
在试验研究和理论推导的基础上，给出了高轴压比下框架柱恢复力模型的骨架曲线，与试验骨架曲线吻合较好。
Measure the grinding force in grinding process and compute the grinding energy ratio, analyzing the grinding mechanism.
试验还进行了磨削过程中磨削力的测试和比磨削能的计算，分析了陶瓷材料的去除机理。
The results appeared that the ratio of modulation showed anomalous changes before some large earthquakes, which indicated that solid tide and tide-generating force have modulating and trigger actions.
结果发现，若干次较大地震前出现调制比的异常变化是固体潮引潮力对地震的调制触发作用而引起的。
Moreover, the effects of density and depth ratio, amplitude and wavelength on maximal total force and total moment are analyzed.
分析了相对密度比、深度比、波幅、波长因素对最大总作用力和总力矩的影响。
Compared with before optimization, outcomes of optimization increase 4% in the ratio of stroke and 14.5% in the force amplification.
将优化前后的结果相比较，行程比增加4%，力的放大倍数增加14.5%。
Under the impact of a large hammer, a high signal noise ratio of the force and velocity can be acquired in the high-strain dynamic testing.
高应变动力试桩法采用数吨重锤锤击，同时实测了桩顶的力信号和速度信号，具有很高的信噪比。
Methods Taking raw material of formula as factor and adhesive force as marker, orthogonal test was used to optimize the matrix ratio in cataplasm.
方法采用正交设计，以黏附力为指标、以配方原料为因素对巴布剂基质组成比例进行优选。
With the across-wind force spectrum, the across-wind dynamic responses of tall square-section buildings with aspect ratio of 6 is analyzed in the conditions of different ground and wind velocities.
引入横风力谱模型，分析了某高宽比为6的方形截面高层建筑在不同地貌和风速条件下的横风向风振响应。
Based on tests of two full-scale double-span prestressed frames, internal force redistribution of frame was studied and continuity of structures and axial compression ratio of column were analyzed.
基于两榀接近足尺的后张有粘结预应力混凝土框架的试验，对多跨预应力框架的内力重分布进行了研究，重点考虑了框架的连续性和轴压比的影响。
Using variable blank holder force can remarkably improve the forming performance, and the limiting drawing ratio would reach 5.0.
采用变压边力可以明显提高板材的冲压性能，极限拉深比将达到5.0。
Through the limiting drawing ratio tests, the influences of rolling, annealing, blank holder force, drawing gap, drawing temperature and speed on the forming performance were investigated.
通过极限拉伸比试验，研究了轧制、退火、拉伸温度、拉伸速度、拉延间隙以及压边力等工艺因素对镁合金板材成形性能的影响。
Axial force transmission, distribution of skin friction, tip resistance of pile, as well as tress ratio between pile and soil are changing with pillow.
研究了褥垫层厚度变化对桩身轴力传递、桩侧摩阻力分布、桩端阻力发挥、桩土荷载分担及桩土应力比的影响。
In this paper, we research the induction electromotive force, signal -to-noise ratio of the two-coil sensor, all of these can lay the foundation for designing apparatus.
研究计算了双线圈传感器的感应电动势、信噪比和趋肤深度，为今后仪器的设计提供了理论依据。
While the control of tensile force will adjust the thickness ratio within a small extent.
控制张力可以在较小范围内精确控制复合后厚比。
The results indicate that the power index, the minimum gap width and the size ratio are the main factors affect the magnitude of the pressure, the force and the moment.
结果发现幂流体的幂指数、颗粒间最小间隙以及颗粒的大小都是流体压力和颗粒间切向阻力的重要因素。
The research result shows that advance force and stability ratio N are the main factors controlling …
研究表明，推进力和稳定比N是影响老隧道变形的主要因素。
The research result shows that advance force and stability ratio N are the main factors controlling …
研究表明，推进力和稳定比N是影响老隧道变形的主要因素。
应用推荐