This Article discussed the theory, legislation models, condition and force of bankruptcy relief through historic analysis method and comparative analysis method.
本文主要采用历史分析方法和比较分析方法，对破产免责的理论、立法例、条件和效力进行了分析。
This paper discussing the mirror photo method and finding the solution deflexion of the plates through mirrir photo method under the concentrate force.
本又讨论了映象法，并利用映象法求解了板在集中载荷作用下的挠度。
Based on the decomposition principle using redundant forces as state variables, this paper applies the method combining the dynamic programming with the force method to the truss structure.
本文在使用多余力作为状态变量的分解原理的基础上，应用动态规划与力法结合的方法，对于桁架结构，建立了动态规划的递推函数等式。
The underground hydrodynamic force function research technique may summarize is mathematics analogue method, the value analogue method and the experimental analogy method.
地下水动力作用的研究方法可概括为数学模拟法、数值模拟法和实验模拟法。
The method of using various released structures in the moment diagram of each unit in force method is discussed in this paper.
本文主要讨论力法计算中，各单位弯矩图可采用不同的基本结构的方法。
This paper introduce the many kinds of thread joint pre-tightening up force control method and against loose measure, elaborates the solution thread joint quality method.
文章介绍了多种螺纹联接的预紧力控制方法和防松措施，从多方面针对性的阐述了解决螺纹联接质量的方法。
The dynamic contact force method is a relatively accurate method for solving dynamic contact problems in viscoelastic media.
动接触力算法是求解粘弹性动接触问题的精度较高的方法之一。
A simple numerical example demonstrates that the proposed method can be used to precisely compute dynamic contact forces with less computational cost than for the dynamic contact force method.
数值算例表明，阻尼简化算法可以简化动接触力方程的求解，在不损失精度的同时减少计算量，可用于动接触力方法中对动接触力的计算。
The effective inspection method for the staying force of in-the-service stay of cable-stayed bridge and arch bridge with rods, together with the application value of the method are presented.
介绍斜拉桥、系杆拱桥等桥型在役拉索索力的一种行之有效的检测方法，及其广泛的应用价值。
The method of gear dynamic mutual abrasion is a method in which the dynamic force on tooth surface was used to do the precision finishing.
齿轮动力互研法是利用齿面动态力达到齿轮精加工目的的方法。
Three methods often used in analyzing stayed cable are analytic method, equivalent two force members method and finite element method.
斜拉索静力分析的常用的方法有：解析法、二力杆法和有限元法。
The results obtained by this method are the same as those by the Force Method.
按本法所求得的结果和力法的一致。
The optimum method of binder force based on CAE and Neural Net Method is provided in the analysis.
提出了基于CAE和神经网络的压边力优化新方法。
Simply and easy method named check table method in design of tightened bolt connection with uncontrolled tightened force is presented.
针对不控制预紧力的紧螺栓联接设计计算时需采用试算法的问题，提出一种无需试算的新方法即查表法。
As to the method of calculating the relative movement force and total fault displacement of two walls of a fault, there are the method of descriptive geometry and the method of diagram analysis.
求解断层两盘相对运动力和总断距等的方法，美国有毕令斯的画法几何，前苏联有莫尔恰诺夫和瓦依涅尔曼的图解分析法。
Methods for accurate gravitational acceleration measurement are presented, which are viscous force modified method and viscous force offset each other method.
本文介绍了用粘滞阻力修正法和粘滞阴力互相抵消法来精确地测量重力加速度。
Both panel method and lifting surface method can be used to calculate the unsteady force.
非定常力可以采用面元法或升力面方法计算得到。
A method named CASE method is presented for determining the statical axial bearing capacity of piles from dynamic measurements of force and acceleration performed under the impact of a large hammer.
本文介绍了用测量大锤撞击作用下的力和加速度以确定桩的静态轴向承载力的凯司(case)法。
The thinning drawing force is calculated through deforming work method and slip-line method irrespectively, and the results are compared in this paper.
本文用变形功法和滑移线法分别求解变薄拉深力，并将两种方法的计算结果进行了比较。
Secondly, by the finite difference method and two-parameter method, this study derives the calculation on the inter force and displacement of the anchor piles.
其次，引入有限差分法与双参数法，考虑桩底的几种约束情况，推导了锚索桩内力与位移计算方法。
It is analyzed the method that makes use of time-domain sequenced evolvement analysis way to identify the force of dispersed system, which handles the reversed problem with sequenced method.
分析了采用时域方法对离散系统进行动载荷识别的方法，它是用正分析的方法来求解反问题。
Because the theoretical calculating method of clamp force is very complex, a simplified experiential calculating method is provided.
鉴于锁模力的理论计算较为复杂，本文提出了一种简化的计算方法。
In the overhead line construction process, we generally use the formula calculation method to calculate all the force and the length, or use manual mapping method to draw and measure.
在架空线路施工过程中，我们通常对各种受力和长度采用计算公式法进行计算，或采用手工作图法绘图测量。
Generalized inverse matrix (GIM) is a new force method based on the generalized inverse matrix theory, which is an iteration method for solving material nonlinear problems.
广义逆力法是一种以力法为力学概念基础，以广义逆矩阵理论为数学理论基础，以迭代求解为求解方式的新算法。
It is difficult to employ the accustomed calibration method for the characteristic of the fingertip force sensor, and the accustomed method is not able to assure the precision.
由于指端力传感器的结构特点，采用通常六维力静态标定方法较困难，且精度无法保证。
The seismic design methods of bridges in the permafrost region are studied firstly. The wave method and the inertial force method are compared.
首先研究了冻土区桥梁的抗震计算方法，对波动法和惯性力法的计算结果进行了对比分析。
The complete force fields of the cis and trans isomers are determined by the method of determining force field combining model potential function method with MNDO method.
将模型势函法和MNDO方法结合起来，得到了顺、反甲酸分子的完整力场。
Many methods, e. g. static force method, moment method, sub-region method and least square method, have been used tog et the critical load.
求压杆临界载荷的方法很多：有静力法、矩量法、子域法、最小二乘法。
The paper puts forward a kind of calculating method for displacement, internal force and interaction of high-rise frame-shear wall structure under lateral load by using continuity method.
提出一种采用连续化方法对高层框架—剪力墙结构在侧向荷载作用下的位移、内力及相互作用的计算方法。
The paper puts forward a kind of calculating method for displacement, internal force and interaction of high-rise frame-shear wall structure under lateral load by using continuity method.
提出一种采用连续化方法对高层框架—剪力墙结构在侧向荷载作用下的位移、内力及相互作用的计算方法。
应用推荐