The equivalent force control method is used to solve implicit difference equation.
等效力控制方法利用控制理论和方法解决了该问题。
Equivalent Force control method (EFCM) settles the problem with the help of control theories and methods.
等效力控制方法利用控制理论和方法解决了该问题。
Direct thrust force control method for the linear motor in theory and experiment has been further studied.
对适合直线电机直接推力控制的方法进行理论分析和实验研究。
A force control method based on inner position loop was discussed and applied to the control of exoskeleton suit.
讨论一种基于位置内环的力控制方法，并将其应用于骨骼服的控制之中。
Presented the constraint force control method can be used to the dynamical systems control with the equality constraints.
提出的约束力控制法，可应用于具有任意等式约束的动力学系统的控制问题中。
Force control method is an important guarantee for the police enforcement, but also the core of policing skills and become a sharp weapon for police enforcement.
武力控制手段，是警察执法的重要保障，也是警务技能的核心内容，更是警察执法的锐利武器。
A method of performing platform stabilization control was described by using the downhole turbine generator as the initiator of force moment and by adjusting its electromagnetic moment.
介绍和分析了一种用井下涡轮发电机作为力矩发生器，通过调节其电磁力矩的方法来实现稳定平台控制的方法。
The method of grasping force control of rubber muscle using VSS theory is discussed.
探讨了用变结构系统理论实现人工肌肉夹持力控制的方法。
Using the variable argument PI control method, the force control of joint is studied.
采用变参数PI控制方法，对关节的力闭环控制进行了试验。
Combined with the study of constant force grinding, a self-study method on fuzzy control rules in grinding process is suggested.
结合恒力磨削的研究，提出了一种基于磨削数据的模糊控制规则学习方法。
A method of virtual environment calibration for remote welding based on surface tracking with robot force control is proposed.
提出了基于机器人力控制表面跟踪的遥控焊接虚拟环境标定方法。
In the paper, the method of active control of radiation sound field from elastic plate by input force is extended to underwater case.
本文把利用输入力有源控制弹性板辐射声场的方法推广到水下情况。
In order to control torque and levitation force, the control method is obtained by formula of torque and levitation.
为了实现对该电机转矩和悬浮力的单独控制，根据转矩和悬浮力公式推导出了对电机上、下定子磁场的控制方法。
According to the poor influences of the cylinder frictional forces to the system control performances, the paper provided a new frictional force compensation method.
文章针对气缸摩擦力对系统控制性能造成的不良影响，提出了一种新的摩擦力补偿方法。
Pneumatic PWM position servo system is nonlinear system. The satisfied results are difficult to be obtained with traditional control method while the friction force of cylinder is large.
气动脉宽调制位置伺服系统是非线性的系统，在气缸摩擦力较大的情况下，采用传统的控制方法难以取得满意的效果。
A design method of the 1mn force standard machine control system was introduced.
介绍了1MN静重式力标准机控制系统的设计。
The thesis puts forward the pile-top displacement control method, and it can account the least force of the anchor wire on anti-slide pile.
本文提出了锚拉抗滑桩锚拉力计算的桩顶位移控制法，计算控制桩顶位移所需的最小锚拉力。
It focuses on the control theory and design method of master-slave medical robot system, that can implement precise teleoperation by means of force telepresence technology.
基于对主从机器人控制系统的动力学分析，研究了借助力觉临场感技术实现主从医疗机器人遥操作的控制理论和设计方法。
For the hardness in building force reduction pool bottom on soft rock and soil, the paper made a discussion on the construction technique and the quality control method of the concrete bottom.
针对在软基上修建消力池底板难度大的特点，阐述了混凝土板的施工技术及质量控制方法。
Abstract: The artificial intelligence method to setup and control rolling force is researched.
文摘：研究了轧制力设定控制的人工智能实现方法。
The artificial intelligence method to setup and control rolling force is researched.
研究了轧制力设定控制的人工智能实现方法。
This kind of static force analysis method provided a theoretical foundation for handling the problems of planning and optimizing grab operation and the design of force control of robot hand.
这种静力分析法对于处理机器人手的抓取操作规划与优化以及力控制设计等问题提供了理论基础。
The control points and demands of gas force remove ash system are briefly introduced, and the method by using PC is also given.
简要介绍了火电厂气力出灰系统的控制特点和要求，给出了用PC实现该控制要求的方法。
Position synchronization control method combined with force tracing control algorithm was put forward to keep the girder horizontal and supported by 4 cylinders averagely.
为使运输与吊装过程中箱形梁严格保持水平，设计中综合采用了位置同步控制和力跟踪控制算法，实现了4个油缸同步运动且受力平均。
Force Limited Vibration Test (FLV) is a kind of test method to control the interface force and acceleration at the same time, which can reasonably compensate the over-test phenomenon.
力限控制试验技术是加速度和力的双重控制的试验方法，它是一种比较合理“过试验”改善试验技术。
The method can be applied to control the exoskeleton suit to follow the pilot's motion and minimize the interaction force as well as decrease the pilot's power consumption.
该方法能控制骨骼服跟随人体运动，同时保持人体对骨骼服的作用力最小，减轻人体的能量消耗。
In this paper, a method of designing the digital controller for real-time computer control hydraulic force system with conditional output feedback is presented.
本文给出用于实时计算机力控制系统的、具有条件输出反馈的数字控制器的设计方法。文中讨论了条件反馈控制器的基本原理、结构以及设计方法。
Adaptive fuzzy control is studied and used to control constrained milling process for constant cutting force. The experiment shows that the control method proposed useful.
讨论了自适应模糊控制的实现方法，并研究了其在有约束的恒力铣削加工过程中的应用。加工实验表明这种方法简单实用。
Model reference control and repetitive control were applied in multi-channel electric hydraulic synchron-force servo loading system, and a new control method based on online learning was put forward.
将模型参考控制和重复控制相结合应用到多通道电液力同步加载系统中，提出了一种在线学习控制的新方法。
Model reference control and repetitive control were applied in multi-channel electric hydraulic synchron-force servo loading system, and a new control method based on online learning was put forward.
将模型参考控制和重复控制相结合应用到多通道电液力同步加载系统中，提出了一种在线学习控制的新方法。
应用推荐