Force analysis is a key problem in particle dynamics.
物体受力分析是研究质点动力学问题的关键。
The article describes the force analysis and performance.
论述该矫直机的力能分析及性能特点。
At first, the discuss of cutting force analysis modeling is made.
首先对切削力的解析建模进行了探讨。
A closed-form reverse force analysis is performed on a spatial three-spring sys-tem.
对空间三簧系统进行了封闭解型静力逆分析。
More, this study was useful for the inner flow field and force analysis of other slantwise pumps.
该项研究对其它斜式泵的内部流态及受力分析也是一个很好的借鉴。
In this paper, we can go in on the force analysis and calculation in both static and dynamic phases.
本文从静态和动态二方面对系统进行受力分析和计算。
Internal force analysis with FEM can provide the foundation to choose the correct reinforcement scheme.
有限元内力分析的结果可为确定合理的加固方案提供依据。
The inverse and direct kinematics, force analysis was presented and the kinematic workspace was discussed.
对该机构进行了位置正解、反解分析和力学分析，并讨论了运动学工作空间。
Thinking for a new clamping-track instrument is put forward according to the force analysis of it in raker.
通过对耙装机卡轨器的受力分析，提出了新型的卡轨器设计思路。
The internal force analysis procedure is put forward in detail, and the construction process is given briefly.
详细介绍了二次加固的内力分析过程，讨论了加固施工的工法要点。
This paper describes the design idea, used technique of the software on internal force analysis of plane trusses.
介绍了平面桁架结构内力分析系统的设计思想、所用技术及其主要功能。
Analyse the working principle of the brake device in the passage, and force analysis and optimization for the structure.
分析了制动装置的工作原理，并对其结构做了受力分析和优化。
Its inverse force analysis is to find all equilibrium configurations when an external force ACTS on its moving platform.
其力逆解即给定作用于上平台上某点的外力，求系统处于静力平衡时的所有构形。
The paper is trying to theoretically demonstrate the subject of this research by the method of factor and force analysis.
本文通过因素分析以期从理论上对这一研究主题进行论证。
Sound judgment of the load transmission relation between them by internal force analysis for correct reinforcement design.
通过内力计算，明确两者之间力的传递关系是正确进行配筋设计的基础。
Gives the force analysis theory of mechanism W of cycloidal gear suitable for engineering practice and series complete formula.
本文提出了一种适用于工程实际的摆线针轮行星传动的输出机构受力分析理论，并给出一套完整公式。
On the basis of the method of residual modal force analysis, the algorithm for determining the location of damage is presented.
基于剩余模态力分析方法，提出了确定结构损伤位置的算法。
The set of equations for inverse force analysis of the spring system is derived at first and then solved using continuation method.
建立了力逆解方程组，用连续法求出了全部解，得到了系统处于静力平衡时的全部构。
From two aspects of the tire model and kinematical analysis, vehicle kinematics and force analysis, the bus dynamics model is introduced.
从轮胎模型和运动分析、整车运动和受力分析两方面介绍了客车动力学模型。
This paper mainly discusses the structure design, internal force analysis and calculation on strength and rigidity of the conveyor triangle frame.
本文主要介绍该输送机三角形支架的结构设计、内力分析、强度和刚度的计算。
This method could be used for frictional force analysis in short to medium radius horizontal Wells, and as a reference to field drilling practice.
该方法可适用中短半径水平井的摩阻力分析，供实际钻井作业参考。
For a geared linkage mechanism, kinematics and force analysis can be accomplished automatically according to the corresponding algorithm respectively.
根据型转化法运动及力分析的分析算法，实现了机构运动分析及力分析的自动化。
Force analysis of ironing mechanism of asphalt concrete paver is carried out during operation, and a dynamics model is built in hypothetical condition.
对沥青混凝土摊铺机熨平机构的作业过程详细地进行了受力分析，并在假设条件下建立了熨平机构的动力学模型。
Force analysis is a key problem in particle dynamics. In this paper, Sir Examples are discussed and criteria are given for the correctness of force analysis.
物体受力分析是研究质点动力学问题的关键。本文结合剖析六个例题，给出两条检查和判断物体受力分析正确与否的规则。
This paper introduced a bond graph method for the dynamical static force analysis of planar elastic linkage, and presented a bond graph model of this linkage.
本文介绍了平面弹性连杆机构动态静力分析的键合图法。给出了平面弹性连杆机构的键合图模型。
Based on the force analysis and strength check on the gyroscopic support, the original design has been improved, such as enlarging the diameter of steel material.
在对回转支承进行受力分析、强度校核的基础上，对原设计作了几点改进，如加大钢球直径、增加高度、选用高级合金钢材料等。
Analyzes the principle, the characteristics, the efficiency and the structure of RV transmission, studies the force analysis at different positions of RV transmission.
本文分析了RV传动的原理、特点、效率及结构，较深入地研究了RV传动在运转的不同位置的受力分析。
The paper describes the characteristics, principle, force analysis, design of the two points underwater buoy mooring system, and its configuration with moored tankers.
主要描述两点水下浮筒系泊系统特点、作用原理、受力分析及与系泊油轮的匹配，该系统各部件尺寸的选择。
The kinematical analysis was made to demonstrate the feasible of the prototype, and the force analysis indicates that the system has sufficient strength and stiffness.
通过运动学分析证实了模型样机的可行性，静力分析表明这个系统具有足够的强度和刚度。
Structural characteristic of 20-hi rolling mill, roll configuration, working concept, the rolling force analysis, derivation and studying results are discussed this paper.
对20辊轧机构造特点、辊系配置、工作原理、轧制压力的分析、推导、计算进行了研究。
应用推荐