The design process of the piezoelectric force sensor in the insole plantar pressure distribution measurement system was introduced.
摘要介绍了鞋垫式足底压力分布测量系统中压电陶瓷力传感器的设计过程。
Cross-beamed wrist force sensor is widely used in robot system.
十字梁腕力传感器广泛应用于机器人系统。
Heavy force sensor is a kind of high technology electric information device for heavy equipment.
大力传感器是现代重型装备的高科技电子信息器件。
The loading effect on dynamic characteristic of wrist force sensor is investigated in accordance with the dynamic calibrating experimental data.
根据动态标定实验数据，分析了负载变化对腕力传感器动态特性的影响。
The contact force during impact process was measured by force sensor and data signal processing system in real time.
冲击过程中的接触载荷由压力传感器及数字信号处理系统实时测量。
Crossed-beam wrist force sensor is widely used in robot system today.
十字梁腕力传感器广泛应用于机器人系统。
Force sensor design principle of the stress concentration.
测力传感器设计的应力集中原则。
This method only USES a force sensor and handles data by microcomputer.
该方法只用一个力传感器，采用微电脑进行数据处理。
The design process of the piezoelectric force sensor in the insole plantar pressure distribution measurement system was introduced.
介绍了鞋垫式足底压力分布测量系统中压电陶瓷力传感器的设计过程。
Using force sensor to measure density of objects can improve the accuracy and stability of the experiment as the result of bettering the traditional experimental methods and instruments.
利用力敏传感器测量物体的密度，改进了传统的实验方法和仪器，实现了非电量电测，提高了实验的准确度和稳定性。
The experimental research on six-dimension force sensor in robot finger is provided as an example. The result shows that the design of software is accurate.
以机器人手指用六维力传感器为例进行了实验，对实验结果的分析表明了该软件的正确性及实用性。
This paper described the development of fingertip force sensor based on cylindrical elastic body employing the water pressure compensation technique, and analysed the principle.
采用水压力补偿技术，设计了基于圆筒式测力结构的水下灵巧手指端力传感器，分析了其工作原理。
Quartz resonance force sensor is a digital sensor with frequency signal as its output form.
石英谐振式力传感器是一种输出为频率信号的数字式传感器。
The purpose of the research in this paper is to design a kind of wireless data collection system with quartz resonance force sensor, for the detection of the steel structure in large building.
本文的研究目的是设计一种基于石英谐振式力敏传感器的无线数据采集系统，用于大型建筑的钢结构受力检测。
This paper introduces a new type of elastic guiding mechanism developed for quartz force sensor It consists of parallel quad crank arms connected by flexible hinges.
提出了一种新型的双平行四连杆柔性铰链弹性导向结构，用作石英力传感器的力导向元件。
Principle of the differential method depressing the drift noise is analyzed, the algorithm in the quartz resonant force sensor is offered.
分析了差分方法抑制漂移噪声的原理，提出了相应的处理算法和在石英谐振力敏传感器中应用。
The specific structure capacitive force sensor, principle and circuit design are introduced, the related experiment data is given out.
从结构设计、工作原理、电路设计对该电容式力传感器进行了分析、论述。 并且提供了相应的实验数据。
A force sensor of optical fibers is introduced in this paper.
本文介绍了一种光纤测力传感器。
The theoretical design and calculation of the circular-section I-shaped beam shearing force sensor have been emphasized in this paper.
本文着重论述了圆截面工字梁剪力传感器的理论设计与计算。
The purpose of the research conducted in this essay is to design a kind of portable force measuring system with quartz resonance force sensor.
本文研究的目的是设计制作一种基于石英谐振式力敏传感器的便携式测力系统。
Making use of communication based on can force sensor can send contact force information to robot controller for force control immediately and accurately.
采用CAN通讯可以确保力传感器准确、及时地把力信息传送给控制器进行力控制。
The hardware of the system mainly consists of a ZHJ-1B current sensor, a self-made resistance strain force sensor , the device for measuring electrode voltage and a NI-DAQ 6062E data acquisition card.
系统的硬件主要有：ZHJ-1B型电流传感器、自行研制的电阻应变式力传感器、电极间电压测量装置及NI-DAQ 6062E数据采集卡等。
It is difficult to employ the accustomed calibration method for the characteristic of the fingertip force sensor, and the accustomed method is not able to assure the precision.
由于指端力传感器的结构特点，采用通常六维力静态标定方法较困难，且精度无法保证。
The fingertip force sensor is the key for the complex task of the dexterous underwater hand, so a fingertip force sensor based on cylinder elastic body is developed.
指端力传感器是水下灵巧手实现复杂作业的关键，开展了基于圆筒结构的指端力传感器研究。
This machine investigates by the electronic track arranges the installment, the expansive force sensor and the magnetic powder leaves the minute, electric appliance control cubicle.
该机由电子跟踪纠编装置，涨力传感器和磁粉离分器，电器控制柜。
Using the proposed model, the relation between the magnetic flux density in the air of the giant magnetostrictive force sensor and the value of force applied on the magnetostrictive rod is calculated.
应用该模型计算了超磁致伸缩力传感器空气隙中的磁感应强度和磁致伸缩棒上施加力的关系，并与实验值进行了比较。
The system of liquid density measurement consists of force sensor, float, data gather, and software.
液体密度实时测量系统由力传感器、浮子、数据采集器、电脑软件组成。
It can rise measurement accuracy of force sensor really by means of this method and display more dominance in case of limited installation dimension. There are utility value in engineering.
这种方法能有效地提高力传感器的实测精度，在传感器安装尺寸受限的情况下，更显示出其优越性，因而在应用工程中有实用意义。
Transfer matrix of wrist force sensor is of importance to decoupling output signals and enhancing precision of wrist force sensor.
腕力传感器的传递矩阵对输出信号的解耦和提高腕力传感器的精度具有重要意义。
Transfer matrix of wrist force sensor is of importance to decoupling output signals and enhancing precision of wrist force sensor.
腕力传感器的传递矩阵对输出信号的解耦和提高腕力传感器的精度具有重要意义。
应用推荐