Thermal glass for welding mask use.
焊接的热的玻璃戴面具使用。
Good, I've noticed you're using robots for welding.
好。我看到工人正在用机器人焊接。
For welding the important structures on mild structures.
焊接较重要的低碳钢结构。
Oxyacetylene flame can' be used for welding of pipeline.
管道焊接不得使用氧乙炔焰焊接。
Removing scratches or burrs for welding side of hairline.
拉丝表面焊接后的去划痕及毛刺。
Health standard for welding fume in the air of workplace.
车间空气中电焊烟尘卫生标准。
Available for welding of low carbon steel and alloy steel.
适用于低碳钢、合金钢等材质的焊接。
Suitable for welding low carbon steel, low alloy steel structure.
适用于各种低碳钢、低合金钢构件的焊接。
Suitable for welding ferrous metal workpiece with general AC electrode.
适合焊接黑色金属工件与一般交流电极。
For welding thicker pieces, automatic frequency control should be adopted.
对于较厚的焊件，应进行频率自动控制。
For welding low-alloy and high strength steel with corresponding strength grade.
用于相同强度等级的低合金高强钢的焊接。
Filler materials: For welding, base metal matching filler materials shall be used.
填充材料：对于焊接，应使用与基材相匹配的填充材料。
Parameter controls for welding current, travel speed, wire speed and shielding gas.
参数控制包括焊接电流，焊接速度，送丝速度，保护气。
And study the influence of welding speed and active gas for welding porosity defect.
着重研究了焊接速度与活性气体对气孔形成的影响关系。
A homogeneous weld electrode was developed for welding spheroidal graphite cast iron.
采用该焊条对球墨铸铁焊接时，可以达到同质焊缝要求。
These alloys are used for welding and brazing filler materials and for sand and die castings.
这些合金用于定位焊接和铜焊的焊料，和用做打磨或模铸。
The MCCB's operating status in low voltage circuit for welding machine control is a special case.
低压电焊机控制回路是塑壳式断路器(MCCB)的一种特殊使用状态。
Low hydrogen electrode to be used for welding thick steel plate to casting and high tensile plates.
应采用低氢焊条焊接厚钢板与铸钢件和高强度板间的连接。
Mainly used for welding different type of steel and clad steel or similar kind of austenitic steel.
主要用于异种钢或复合钢的焊接或用于焊接相应成分的奥式体钢。
Suitable for welding of critical structures of low carbon steel and low-grade strength of low alloy.
用于焊接较重要的低碳钢结构和强度等级较低的低合金钢。
Give the detail requirements for welding spot, welding equipment and product inspection during welding.
给出了产品施焊中对施工现场、设备及产品检验的具体要求。
This thesis is based on "the Research on X-ray Real-time Radiography Inspection System for Welding quality".
本文是结合课题“焊接缺陷X射线实时成像检测系统的研究”来进行的。
To examine chemistry composition and microstructure of steel wire rod for welding of fracture during drawing.
对在拉拔过程中出现断裂的焊接用盘条进行化学成分和金相组织检测。
The effect of electrode wear on indentation depth and weld quality was studied for welding galvanization steels.
进而分析了点焊镀锌板的电极磨损对压痕深度与焊点质量的影响。
For welding similar stainless steels, compound steel plate, dissimilar steels which can insisting sulphuric acid.
用于焊接耐硫酸介质腐蚀的同类不锈钢、复合板、异种钢等。
The technology provided a simple and practicable means for welding thicker molybdenum plates and pipes in work site.
这为在工程现场焊接较厚的钼板和钼管提供了一种简单可行的方法。
The visual servo and control system for welding seam tracking were validated by experiment, the feasibility also been proved.
通过实验对焊缝跟踪视觉伺服控制系统进行了验证，说明了该系统的可行性。
The paper discusses the design method and principle for "Automatic Creation Software System of Outspread Drawing for Welding".
系统地阐述了计算机辅助焊接件展开图形自动生成软件系统的设计方法与原理。
The carbon content being high, this kind of welding rod is not fit for welding machine parts that have to withstand high stress.
由于含碳量高，所以这种焊条不宜焊接必须承受高应力的机器部件。
The development process and functions of a "Compiling expert system" for welding technology on electric locomotives are described.
介绍一种用于电力机车的焊接工艺制定专家系统的开发过程及功能。
应用推荐