A design of pneumatic pressure system is worked out based on the characteristics of pressing system for ultrasonic welding of plastic.
从超声波塑料焊接工艺出发,分析研究了气动加压系统应具备的待性。进而设计出一套气动加压系统。
Ultrasonic defect detection inspection shall be carried out for welding seams and defects shall be removed. the excess weld metal of welding seam must be eradicated and abraded after welding.
焊缝须进行超声波探伤检查并清除缺陷,焊后对焊缝余高进行铲除并磨平。
For arc ultrasonic excitation, both the continuous and the pulse signal was separately applied to the test system including a conventional arc welding circuit.
在常规弧焊回路中采用了连续波和脉冲敲击式等不同的激励方式获得电弧超声信号。
The mechanism of ultrasonic seam welding of copper plates and tubes for collecting solar energy was investigated.
研究了太阳能集热铜片和铜管的超声波缝焊机理。
A new design method for large cross-section blade-like ultrasonic plastic welding horns with slots is pre-sented, and relative experiments have been done to validate this method.
提出了一种大尺寸长条形超声塑焊开槽焊头的设计方法,并对其进行了实验验证。
According to the technology and configuration of the vacuum braze welding metal honeycomb parts, the technique of ultrasonic inspection for them was studied.
针对金属蜂窝真空钎焊件的工艺及结构特点,探讨了利用超声波法对其质量进行检测的可行性和可靠性。
Ultrasonic welding for ribbon is widely used in developed countries, electric resistance welding is still used in China.
超声波焊接是发达国家色带生产企业普遍采用的色带焊接方法,而国内企业均采用落后的电阻丝焊。
For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.
采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。
The article puts forward computer aided design (CAD) method used for a light flexural vibration of the ultrasonic spot welding machine.
该文提出了超波声点焊机轻型弯曲振动系统的CAD(计算机辅助设计)方法。
A moving utensil for portable ultrasonic probe which is made of chargeable electronic screwdriver is introduced, and it can be used to assist detector to detect steel butt-joint welding seam.
介绍一种利用充电电动螺丝批改制的轻便手持式超声波探头移动器,可辅助检测人员进行钢板对接焊缝的超声波检测工作,从而提高检测工作效率、减轻工作强度。
The probe choices for ultrasonic crack detection of welding line of light sheet are discussed from two aspects of theory and practice.
从理论和实践两方面探讨了薄板焊缝超声波探伤探头的选择方法。
The application of PLC in the automatic ultrasonic inspection of LSAW can greatly improve the accuracy and efficiency of inspection, and is helpful for raising the welding quality and productivity.
将可编程序控制器(PLC)应用于LSAW自动超声检测系统,可极大地改善焊管检测效率和可靠性,有益于提高焊缝质量和生产效率。
The ultrasonic echoes of welding flaws for three types of pressure vessel are analyzed for feature extraction of signal processing using higher-order spectrum method.
针对焊接缺陷超声检测中信号处理的特征提取问题,应用高阶谱方法对三类压力容器焊接缺陷的超声回波信号进行了分析。
The ultrasonic echoes of welding flaws for three types of pressure vessel are analyzed for feature extraction of signal processing using higher-order spectrum method.
针对焊接缺陷超声检测中信号处理的特征提取问题,应用高阶谱方法对三类压力容器焊接缺陷的超声回波信号进行了分析。
应用推荐