He was a design engineer for shell and tube heat exchangers and air-cooled heat exchangers for 23 years.
他是一个23年的设计工程师管壳式换热冷却热交换器的换热和空气。
Heat exchangers - Refrigerant cooled liquid coolers - Test procedure for establishing the performance.
热交换器。制冷剂冷却的液体冷却器。性能确定的试验程序。
This steam is then collected for use in other heat exchangers or discharged to the condensate return line.
这部分蒸汽会用于其他热交换器或者排放到凝结水回水管线中。
Aluminum foil is also widely used industrially including heat exchangers in cars, thermal insulation for buildings, pipework, aerospace, cables and in the electronics industry.
铝箔也广泛地使用于工业领域，如汽车热交换器、建筑、管道、航空、电缆以及保温材料。
Causes of failure are analyzed for heat exchangers widely applied in refining units and chemical units from the viewpoints of corrosion and sealing element failure.
针对炼油、化工装置中应用广泛的换热器的失效问题，从腐蚀、密封件失效等方面入手，分析了换热器的失效原因。
The different methods for the corrosion protection of heat exchangers were discussed and aluminum diffusion and zinc diffusion processes were high-lighted.
文章对换热器的不同保护方法进行了介绍，重点讨论了渗铝、渗锌两种方法。
There will be 3 vertical cooling water pump set in circulation water pump workshop, with 3 cooling water heat-exchangers for the system.
循环水泵房布置3台立式冷却水泵，系统配备三台冷却水热交换器。
It also provided theoretical basis and reference for approximation of EHIDDiC by externally heat exchangers.
同时，对使用外部换热器简化外部热耦合结构的方法提供了理论依据和参考。
A transient testing technique for measuring average convection heat transfer coefficients of compact heat exchangers is suggested.
提出了一种紧凑式换热器平均表面传热系数瞬变测试方法。
Acceleration, displacement and strain response from seismic tests for all main parts of the three types of heat exchangers were measured under both conditions with and without water.
在有水和无水条件下进行了该三台热交换器的地震响应试验，测得了热交换器中各重要部件的加速度、位移和应变响应值。
Traditional hydronic sizing methods can be used for selecting pumps, expansion tanks, heat exchangers, and air removal devices, as long as the heat transfer liquid's thermal properties are considered.
传统的液体循环加热体量法在泵、蒸发器、热交换器和空气移动装置的选择中可以应用，在考虑载热流体的热血特性的情况下。
For promoting energy economy and environmental protection in refrigeration system, Alfa Laval has developed new version of Semi-welded plate heat exchangers by continuous R&D.
为促进制冷系统的节能环保，通过不断的研发改进，阿法拉伐公司研制出的新一代半焊式板式换热器。
A new method, which is based on the spiral line equations, for the spiral calculation in the spiral plate heat exchangers was introduced in this paper.
提出了一种基于螺旋线方程的、全新的螺旋板换热器螺旋计算方法，给出该算法的计算公式以及公式的导出过程。
When specifying pumps and heat exchangers, allow ample margins for pressure drop increases above stated design values.
当具体指定泵和热交换器的时候，考虑在开始设计值的基础上留下压力足够升降变动值。
The optimization design of guide shell is very important for compact plate-shell heat exchangers.
对于紧凑型板壳式换热器，导流结构的优化设计是至关重要的。
To investigate the performance characteristics of these fins, 9 single row finned tube heat exchangers sample were tested in a suction opened circuit thermal wind tunnel for a number of geometers.
为了考察这类翅片的性能特征，对9种不同几何参数的单排肋管式换热器样件在吸风式直流热风洞内进行了实验。
This paper describes data processing, mathematical models, calculation methods and flowcharts in the heat transfer calculation for multi - fluid plate-fin heat exchangers.
本文阐述多股流板翅式换热器传热计算中的数据处理、数学模型、计算方法和框图。
Tig brazing process between dissimilar metals like copper and steel, copper and stainless steel are investigated and well-applied to production for high efficiency heat exchangers.
对铜与钢，铜与不锈钢异种金属氩弧钎焊工艺进行了研究，并成功地用于高效热交换器生产。
This paper reviews the cause of corrosion failure of the water gas heat exchangers and suggests some effective methods for it.
本文对小氮肥厂煤气换热器的腐蚀破坏机理进行了分析，提出了防护措施。
The results provided a basis for the subsection design of similar heat exchangers.
试验结果为同类换热器的分段设计提供了依据。
For the design of heat exchangers, the structural adoption of the reduced cone on shells has essential effect on the safety and economy of equipment.
在换热器设计中，壳体上的变径锥体结构选择关系到设备安全，经济合理性。
Are the heat exchangers used for cooling?
热交换器是用于冷却的吗？
Influence of exchangers is presented , which can provide some references for improving and optimizing shell and tube heat exchangers.
本文阐述了纵流式管束支撑物的结构变化对换热器综合性能的影响，为改进和优化管壳式换热器提供参考。
The design study can be regarded as the theoretical basis of the absorber design and ca give the references for this kind of het and mass exchangers design, developing and application.
这项设计研究可作为板式膜反转降膜吸收器设计的理论依据，并为今后这类传热传质设备的工程设计、开发和应用提供一定的理论参考。
This paper analyses all factors that influence the telephone connection of program-controlled customer exchangers and puts forward measures for raising the telephone connection rate.
分析了影响程控用户交换机电话接通率的各种因素，并结合实际情况指出提高电话接通率的具体措施。
Gas or liquid pressure medium can be introduced into the use process, which is suitable for various kinds of heat exchangers with different media types.
使用过程中可以分别引入气态或液态打压介质，适用于不同介质类型的各种换热器。
The optimizing software and the database of fins are universal and can be used for general optimum design of heat exchangers.
本文的优化软件和翅片数据库具有通用性，可应用于一般板翅式换热器的优化设计。
A staggered cylindrical array represents a major structural form of heat exchangers for a solar energy based thermal power station.
叉排圆柱阵列是大型太阳能热电站换热器的重要结构形式。
Finned tube heat exchangers are applied in industry for a long time, while the heat transfer enhancement of the finned tube heat exchangers has become one of the important research area in academia.
长期以来，翅片管换热器广泛应用于工业界，由此翅片管的强化换热就成为了学术界重要研究领域之一。
These results indicate that DEAE-cellulose exchangers prepared in our laboratory have high adsorption capacity for protein and elution with ease.
实验结果表明：DEAE—交换剂对蛋白质具有吸附容量高、易于洗脱的良好性能。
应用推荐