The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.
提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。
Numerical simulation is a effective method for solving problems of fluid flow and heat transfer in complex geometries.
数值模拟是解决复杂区域的流动和换热问题的一个行之有效的方法。
The flow field and temperature field of the uniformity phase fluid were measured by PIV and the steadystate method during the state of onflow.
用粒子成像测速技术（PIV）和稳态法分别测量均相流体在热管生物反应器中湍流时的流场、温度场；
The perfect method for predicting waterflood performance would of course include all pertinent fluid flow, well pattern, and heterogeneity effects.
预测油层注水性能的完美方法，当然包括所有相关的液流，布井系统和不均匀性效果。
We investigate the flow mechanism of this conveyor in a horizontal configuration by a discrete element method (DEM), applying a periodic boundary and omitting the existence of fluid medium.
我们用离散元(DEM)方法研究了这种运输机在水平配置时的流动机制，施加周期性边界条件并忽略流动介质的存在。
On the basis of fluid mechanics, a comprehensive model for simulating flow field at nozzle exit is developed by using desecrate vortex method.
根据流体力学原理，用离散涡方法建立了在复平面上模拟喷嘴出口流场的一套完整模型。
In order to reduce the effect of fluid viscosity change on the sensor performance, a quantitative optimization method for rotor parameters of liquid turbine flow sensor is put forward.
以降低传感器特性受被测液体粘度变化的影响为目的，提出了液体涡轮流量传感器叶轮的多参数定量优化方法。
The phenomenon of random fluid flow on multistage column trays is simulated by applying theory and method of Markov process.
利用马尔可夫过程的理论和方法，模拟多级塔板上的液体随机流动现象。
In this article, a calculation method is put forward for free vibration frequency of a pipe which contains flow fluid.
本文提出了对包含有流动流体的管道自由振动频率的一个计算方法。
The routine flow measuring method is not suitable for high temperature fluid.
常规的流量检测方法对于高温流体无法适用。
In this paper the open sump flow with vertical intake is simulated with calculation fluid dynamics method according to model-test reports of Lianhu pump station.
本文着眼于使用计算流体力学方法对带有竖直吸水管、正向进水的开敞式前池与进水池的流态进行数值模拟。
The distribution of flow field in clearance seal with balanced-pressure grooves is calculated by using the method of computing fluid mechanics.
使用计算流体力学的方法，计算增加压力平衡槽后间隙密封中的流场分布。
On the basis of the multiphase flow theory, the flow behavior of multiphase fluid in ground pipelines of well was investigated with the integrated method of prototype observation and in-situ test.
基于多相流基础理论，采用原型观测与室内实验相结合的方法，研究了油气井生产及测试管道中多相流的流动过程。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
Core flow simulation test is a kind of effective method to screen out and evaluate the working fluid system and operational procedure.
岩心酸化流动模拟试验是室内筛选评价工作液体系和注液程序的有效方法。
A numerical model, based on the finite element method, is established to describe a fluid flow in a deforming saturated oil reservoir.
利用有限元方法，建立了一个描述可变形饱和储层中流体流动的数值模型。
The study of the flow of power-law fluid in a helical pipe with circular section with numerical method (finite volume method).
采用有限容积法研究了圆截面螺旋管道内幂律流体的流动。
A novel body fitted numerical method with Cartesian coordinates for solving incompressible viscous fluid flow problems is studied.
研究一种新的全贴体的求解粘性不可压流体流动问题的非结构化直角坐标网格方法。
The monophase fluid flow in triple media is considered as Markovian renewal process, and a mathematical model is set up with a new method in this paper.
本文把单相流体在三重介质中的流动视为一更新过程，从而用新方法建立了数学模型。
On the basis of computational fluid dynamics (CFD), adopting limited volume method, the external flow field of a car body is simulated.
以计算流体力学(CFD)为基础，采用有限容积法模拟计算了轿车车身的外部流场。
Three dimensional annular seal flow field was simulated quasi-steadily with computational fluid dynamics (CFD) method in a rotating reference frame. The Rotordynamic coefficients were calculated.
应用计算流体力学(CFD)方法对转动坐标系下的三维环形密封流场进行了准稳态数值模拟，在此基础上进行了转子动力系数的计算。
The study of the flow of power-law fluid in a helical pipe with circular section with perturbation method.
采用摄动方法研究了圆截面螺旋管道内幂律流体的流动。
The results show that finite element method is suitable for the analysis of non-Newtonian fluid flow with complex geometry.
结果表明有限元法适于分析复杂流场中非牛顿流体的流动。
The flow of power-law fluid in a helical pipe with circular section has been studied using perturbation method.
采用摄动方法研究了圆截面螺旋管道内幂律流体的流动。
The influence of the front shaped monolith on the internal flow of an automotive catalyst converter was studied by using computational fluid dynamic method (CFD).
采用计算流体动力学(CFD)的方法，在一典型催化转化器结构的基础上，研究了催化转化器载体前端造型对其内部流动特性的影响。
The porous media model method can be used to simulate the fluid flow in porous materials, especially for the flow in porous fluid coupled areas.
多孔介质模型方法可以用于多孔介质中流体流动问题的数值模拟，并且非常适于进行多孔介质纯流体耦合流动区域的数值模拟。
The paper analyses the action method, disturbance wave property and excitation condition of hydraulic independent excitation and theoretical model of fluid flow property in resonance cavity.
对水力它激的作用方式、扰动波特性、激励条件和共振腔内流体流动特性理论模型进行了较全面的理论分析。
The detailed distribution of pressure and velocity on the cone obtained after simulating the flow characteristics of a V-cone flowmeter with the computational fluid dynamics (CFD) method is analysed.
运用计算流体力学(CFD)方法，对V锥流量计进行了数值模拟，得到了锥体上的压力和速度的详细分布情况，并对其进行了分析。
Oxygen Activation Water Flow Logging is a method of measuring the velocity of fluid in downhole.
氧活化水流测井是一种测量井下水流速度的测井方法。
For the Non-Newtonian fluid, Finite Element Method (FEM) is used to have an accurate description of the fluid flow details and this result can be used for further reduced-order modeling.
然后针对一类复杂的非牛顿流体，采用有限元方法对其建模分析，得到的结果可以为进一步的简化解析建模提供参考。
应用推荐