The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。
Horizontal continuous casting procedure includes four processes: electrolysis copper plate melting, copper fluid solidification, the drawing and cutting of tube billet.
水平连铸这道工序包括四个过程：电解铜板的熔化，铜液的凝固，管坯的牵引和管坯的切割。
The usage status of cutting fluid can be observed directly by iron spectrometer under a suitable test condition.
在合适的试验条件下，还可利用铁谱仪直观地了解切削液的使用状态。
The technology and its application and the equipment selection for cutting fluid processing center in the enterprise with high volume machining production are introduced in detail in this paper.
对大批量生产的机械加工企业中所采用的切削液处理中心技术及其设备的选型和应用作了详细的介绍。
It can clear scrap iron, cutting fluid and some other inclusion in order to raise the precision and the life of bearings.
通过对成品轴承的清洗，可以去除粘附在轴承表面和沟槽内的铁屑、切削液等杂质，提高轴承的精度与寿命。
As a new green manufacturing technology, dry cutting is effective not only in avoiding the environmental pollution due to cutting fluid, but also in dropping production cost greatly.
干切削作为一种新型的绿色制造技术，不仅能避免切削液对环境的污染，而且能大幅度降低产品的生产成本。
Cutting fluid is the important related material in metal cutting process.
切削液是金属切削加工中的重要配套材料。
ATS-305 Semi synthetic soluble cutting fluid is the advantage of both emulsion lubrication, and synthetic fluid stability.
305半合成水溶性切削液的好处是既有乳化液的润滑性，还有合成液的稳定性。
The cutting force can notably be deduced using the cutting fluid during machining.
在切削加工中，使用切削液能显著降低切削力。
The features and developing trend of modern cutting fluid technology in the case of higher requirements for performances and environmental protection are introduced.
综述了在对切削液性能要求和环保要求日益提高的情况下现代切削液技术的特点及发展趋势。
The results show that the metal soften is dominant in dry turning process, a good surface can be acquired in wet turning, and the cutting fluid takes an effective effect at the end of tool wear.
试验表明：干切削状态下金属软化效应占主导地位，湿切削可获得更好的表面粗糙度，切削液在刀具磨损后期开始发挥作用。
Stock removing velocity and cutting fluid on the tapping for the materials have been studied in the paper, and thus reasonable tapping conditions for practical working could be selected.
我们首先分析两种材料的加工特性，又从丝锥材料、切削速度、 切削液三方面说明了对不锈钢和钛合金材料攻丝加工时的影响和选取方法。
This article has explained the current situation and characteristics of traditional cutting fluid and the new cutting technology and its development trend.
文章阐述了传统切削液的现状及使用特点和新型切削技术及其发展趋势。
According to the basic requirement of cutting fluid system in green manufacturing, the selecting principle of cutting fluid system in green manufacturing was given.
针对绿色制造对切削液系统的基本要求，提出了绿色制造中切削液系统的选择原则。
Through analysis and research on cutting fluid used by the bearing grinding process, new environment protection conducting polyaniline water-based antirust cutting fluid is selected.
分析研究轴承磨加工工序所用的切削液，并选出新型环保导电聚苯胺水性防锈切削液进行试验。
HIGHCLEAN is a nonflammable water-soluble cutting fluid of high performance and storage durability.
HIGHCLEAN是高性能和存贮耐久性不易燃的溶于水乳化切削油。
Boric acid ester, tri ethanolamine salt of substituted benzoic acid and sodium gluconate were used as anti rust additives in water based cutting fluid.
以硼酸酯、取代苯甲酸乙醇胺盐、葡萄糖酸钠三者为混合防锈剂应用于切削液中，其中硼酸酯和取代苯甲酸乙醇胺盐有明显的协同效应。
Proposed that a metal cutting database is basically composed of databases of cutting data, tool geometry angles, cutting fluid and unit cutting power.
提出由切削用量库、刀具几何角度库、切削液库和单位切削功率库基本构成金属切削数据库，给出了它们的关系模式。
The emulsion breaking-coagulation-photocatalysis oxidation process was used in the treatment of waste cutting fluid.
采用破乳—混凝—光催化氧化法处理废切削液。
The emulsion breaking-coagulation-photocatalytic oxidation process was used in the treatment of waste cutting fluid.
采用破乳+—混凝—光催化氧化法处理废切削液。
It could also be applicable to cutting fluid.
用于多效型水基合成切削液中，试验结果满意。
Through cutting experiment, the influence on cutting force and surface quality was analyzed when change the parameters such as cutting speed, back cutting depth and cutting fluid and so on.
通过切削试验，分析了切削速度、背吃刀量以及切削液等参数改变时，对切削力及表面质量的影响。
The cutting fluid system is an important constituent part of the manufacturing machining, and during the machining process, cutting fluid is one of the main roots of environment pollution.
切削液系统是机械加工中重要的组成部分，切削液是造成环境污染的主要根源之一。
The effects of rust inhibitors, hard water and surfactants on synthetic cutting fluid were investigated.
结果表明，选择合适的功能添加剂调配的合成切削液防锈性能较好，并适应较高硬度的水。
This cutting fluid has good rustproof, fast cooling, lubricity, easy cleaning and long life period (100 days), doesn't irritate the skin, is environment protection products.
该切削液具有良好的防锈性、冷却性、润滑性、清洗性，且它的使用周期长(100天)，不刺激皮肤，属于环保型切削液产品。
The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).
分析线切割工作液的工作特点及工作状态，从生产实践中总结出科学合理选择使用工作液的方法。
This is a precision cutting machine in which mechanism, light, electronic, vacuum technique, fluid mechanics and air dynamics are integrated.
它是集机、光、电、真空技术、流体力学和空气动力学于一体的精密切割类设备。
Experimental study on the effects of operating parameters and fluid performance on casing cutting efficiency is introduced in this paper.
影响磨料射流切割套管效率的因素很多，着重研究了磨料射流的工作参数以及流体介质性质对切割套管效率的影响。
The result showed that not only the performances of this kind of water - synthetic cutting fluid were excellent, but also it was of great environment protection value.
经实用证明：该切削液不仅性能优良，而且具有十分重要的环保意义。
The result showed that not only the performances of this kind of water - synthetic cutting fluid were excellent, but also it was of great environment protection value.
经实用证明：该切削液不仅性能优良，而且具有十分重要的环保意义。
应用推荐