In this paper a reliable commercial CFD software FLUENT is introduced to simulate the viscous fluid field around the trimaran sailing in shallow waters.
本论文就是利用较成熟的商业软件FLUENT对处浅水域情况下的三体船周围的粘性流场进行数值模拟。
The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.
提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。
This article does the research on the oil-air separator used in the submarine using FLUENT, the business software of CFD.
本文利用计算流体力学CFD商业软件FLUENT对潜艇上使用的油气分离器内部流场进行了数值模拟。
The general-purpose CFD code FLUENT is used to calculate the transient process of China helium-cooled solid breeder test blanket module (TBM) under loss of coolant accident (LOCA) scenario.
用通用计算流体力学程序FLUENT计算了中国氦冷固体增殖实验包层模块（TBM）冷却剂丧失事故中的冷却剂排放瞬态过程。
The turbulent combustion model in PIM is reasonable, and using the CFD code FLUENT to solve combustion in PIM is feasible.
利用FLUENT软件求解多孔介质中燃烧问题是有效的，该二维惰性多孔介质燃烧模型是合理的。
CFD software FLUENT is used to analyze the fluid field and FE software ANSYS to analyze the riser dynamic response.
在计算过程中，分别采用流体分析软件FLUENT分析流场和有限元分析软件ANSYS计算立管的动力响应。
The commercial code of CFD (Computational Fluid Dynamics), FLUENT-5, has been used to numerically simulate the flow field in the draft-tube agitated tank.
利用计算流体力学软件FLUENT-5，对带导流筒搅拌槽内的流场进行了数值模拟。
The effects of two types of airfoil on the performance of multi-blade centrifugal fan used in floor standing air-conditioner are investigated by using the commercial CFD code fluent.
采用CFD手段对两种采用不同叶片翼型的风机进行整机模拟计算，研究了叶片翼型对风机性能的影响。
By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
In this paper was preformed numerical simulation for micro-scale combustor with counterflow heat exchanger using both CFD FLUENT and surface chemistry subroutine DETCHEM.
本文联合使用计算流体力学软件FLUENT和可以计算表面反应的化学反应动力学软件DETCHEM对有逆流换热的微尺度燃烧器进行了数值计算。
Also FLUENT, which is the large scale CFD software, has been applied to imitate the foaming process of aluminum melt.
利用大型计算流体软件——FLUENT对熔体直通气体发泡法过程进行模拟。
The growth of titania nanoparticles in flames is simulated by using the commercial CFD-code FLUENT & it′s UDF.
通过编制C语言程序在CFD商业软件FLUENT中引入颗粒动力学模型，实现对颗粒成长的数学模拟。
The numerical simulation on fluid flow in cooling water jacket of 498 diesel engine is performed using computational fluid dynamics (CFD) software FLUENT.
应用CFD模拟分析软件FLUENT对498发动机冷却水套内的流场进行模拟计算，研究分析了水泵内流场对发动机内冷却水流动的影响。
Thirdly, CFD software FLUENT was applied to simulate the wiping process by rotor on the evaporating wall in two-dimension plane.
本文使用计算流体力学软件FLUENT对二维平面上转子对壁面液膜的刮擦过程进行模拟。
By computing through the comprehensive CFD software, FLUENT 6.1, the flow field of mixture flow and the sludge distribution is simulated and analyzed.
采用大型计算流体软件FLUENT 6.1进行计算，模拟并分析了氧化沟沟内的混合液流场及污泥分布。
This paper according to the different factors and use the CFD software FLUENT established different simplified models.
本文分别针对上述不同因素，建立了不同的简化模型，利用FLUENT做了数值模拟。
In resolving battery problems, engineers apply the advanced CFD technology of ANSYS FLUENT software to examine electrochemistry and to develop advanced battery cooling solutions.
在解决电池问题上，工程师们可以采用ANSYS的先进的计算流体力学软件FLUENT去检查电化学，研发先进的电池冷却方案。
Than, study the simulating method of trifluoromethane fire extinguishing system by FLUENT, the commercial software of CFD.
然后，利用CFD商用软件FLUENT进行三氟甲烷灭火系统模拟方法的研究。
The 3D numerical simulation of the QD128 aero-derivative gas turbine combustor was performed by using computational fluid dynamics(CFD) software FLUENT.
应用计算流体动力学软件FLUENT，对QD128航改燃气轮机燃烧室进行了三维数值模拟计算分析。
This thesis uses the CFD soft ware-FLUENT, realizes the simulation of airdistribution. The simulation offers guidance to the optional design of the air distribution of this type of problem.
本文通过运用CFD软件，实现了地下电站高大厂房几种送回风方式的数值模拟，可为此类高大空间建筑气流组织的优化研究提供参考。
The numerical Simulation which applying CFD software FLUENT to the hot blast shaftless stove with Multi-burner-port Annular Flameless Ceramic burner is introduced in this paper.
采用CFD软件FLUENT对多火孔无焰陶瓷燃烧器的顶燃式热风炉燃烧室的燃烧情况进行了数值模拟。
The numerical Simulation which applying CFD software FLUENT to the hot blast shaftless stove with Multi-burner-port Annular Flameless Ceramic burner is introduced in this paper.
采用CFD软件FLUENT对多火孔无焰陶瓷燃烧器的顶燃式热风炉燃烧室的燃烧情况进行了数值模拟。
应用推荐