The flow control devices of tundish for ingot casting has been optimized through hydraulics simulated experiment.
通过水力学模拟实验，优化了模铸连浇中间包控流装置。
By simulating and analyzing, the appropriate flow control devices have been proposed which can benefit the practical operation.
通过模拟分析，确定了合理的中间包控流装置，指导生产实践。
Most methods were adopted to research the steel flow pattern, inclusion trajectories and fluid flow field with and without flow control devices.
中间包实验采用数理模拟的研究方法对各种控流装置条件下中间包内钢液的流动模式、夹杂物模式以及流场等方面进行研究。
Based on the standard of the residual time distribution curve (RTD curve), the flow control devices in the slab tundish were optimized by numerical simulation method.
以某钢厂板坯连铸中间包为原型，利用数学模拟方法，以钢液停留时间分布曲线(RTD曲线)为评判标准，对目前使用的中间包内控流装置进行了优化。
The reasonable type of flow control devices was put forward for increase of fluid average residence time and lowest residence time as well as accelerating floatation of inclusions in the tundish.
通过优化设计，提出了改善流体在中间罐内的最短停留时间和实际的平均停留时间和促进夹杂物上浮的控流装置形式。
The new flow control devices, turbulence inhibitor and wall gas blowing, have been developed for the tundish of slab continuous casting in No. 2 Steelmaking Plant, BENXCO by compared experiments.
结合本钢炼钢厂板坯中间罐的控流装置，通过实验室对比试验研究，开发了新型控流装置——湍流控制器和微细泡气幕挡墙。
The water modeling of five - strand billet caster tundish was carried out. The result has showed the appropriate shape of flow control devices in tundish is feasible to improve flow pattern of fluid.
报导了五流方坯连铸中间罐内流体流动状态的水力学模拟试验研究，其试验结果表明：在该中间罐内设置适当的控流装置形式对改善中间罐内流体的流动模式是可行的。
The temperature distributions in tundish were given for various temperature difference and flow control devices. The effect of natural convection on flow pattern in different conditions was discussed.
还给出了不同温差、不同控流装置下中间包内钢液温度的分布，并讨论了在不同条件下自然对流对钢液流动的影响。
For all devices, the Settings are 115200, 8 bits, no parity, 1 stop bit, and no hardware or software flow control.
对于所有设备，设置是115200、8位、无分区、没有硬件或软件流控制。
Brooks, headquartered in hatfield, pa, provides flow measurement and control devices to the low flow application market, and principally serves the chemical and semiconductor industries.
布鲁克斯公司总部位于宾夕法尼亚州的哈特菲尔德，为低流量应用市场提供流量测量和控制设备，主要服务于化工和半导体工业。
The methods and devices to control the circulation solid flow pneumatically are studied in this paper.
因此，本文主要研究通过气动方式控制循环流化床循环物料的方法和装置。
An effective and energy saving heating system needs many control devices, such as flow controllers and differential pressure controllers.
每一个有效节能的供热系统都配有相应的调节控制设备，如自力式流量控制阀、压差控制阀等。
This paper reviews the work principle of the reactor for deposition temperature, pressure and gas flow control, and the measurement theory of the measurement devices.
其中着重描述了反应腔对反应温度，反应压力和气体流量的控制方法，以及测量设备对淀积薄膜性能的测量原理。
Typical applications include connection to high flow manual hydraulic valves, variable volume pumps and HST's to obtain remote electrical control of these types of devices.
一般应用包括高流量手动液压阀连接、变流量泵和HST来对这些类型的设备进行远程电力控制。
This paper mainly introduces some flow-control devices in continuous casting tundishes and summarizes their effects and application.
本文主要介绍了连铸中间包内控流装置的几种形式，并对其作用与应用状况做了综述。
With this model, the UPFC power flow control problem can be optimized including the constraints existing in the power system and the UPFC devices themselves.
通过该模型，UPFC的潮流控制问题可以使用优化来解决，并可充分考虑系统中以及UPFC本身存在的约束条件。
The control parameters and regulation pattern is set up according to the power flow control problem. A detail derivation is made on the equivalent injection power equation of several FACTS devices.
针对潮流控制确定了FACTS的控制参数和调节模式，对几种FACTS装置的等效注入功率模型进行了详细推导。
Proportional control valves such devices export volume (flow, pressure) can be imported in accordance with the law of change in the continuous signal proportional to regulate.
比例控制阀这类阀的输出量(流量、压力)可以按照输入信号的变化规律连续成比例地进行调节。
Proportional control valves such devices export volume (flow, pressure) can be imported in accordance with the law of change in the continuous signal proportional to regulate.
比例控制阀这类阀的输出量(流量、压力)可以按照输入信号的变化规律连续成比例地进行调节。
应用推荐