The flow and heat transfer in a grooved channel were numerically studied.
对凹槽通道中的流动和换热问题进行了数值模拟。
The fluid flow and heat transfer through a brush seal configuration were numerically simulated.
对刷式封严的流动和换热进行了数值模拟。
The periodicity of the flow and heat transfer in a corrugated channel is numerically investigated.
本文对锯齿型通道内流动与换热的周期性进行了数值模拟。
The non-isothermal phenomenon may bring about significant effect on the fluid flow and heat transfer.
液 的非等温现象对中间包内流体流动和传热有着重要的影响。
The research focal point in the future lies in flow and heat transfer mechanism and effects of baffle.
未来的研究重点是流动换热机理以及影响流动换热机理的因素。
Air flow and heat transfer in medical human respiratory tube was numerically simulated with CFX software.
应用CFX软件对医疗人体呼吸管气体流动传热问题进行了数值模拟分析。
A mathematical model has been established for fluid flow and heat transfer in weld pool with a deformed surface.
建立了熔池表面存在变形的流场与热场的数学模型。
Numerical simulation is a effective method for solving problems of fluid flow and heat transfer in complex geometries.
数值模拟是解决复杂区域的流动和换热问题的一个行之有效的方法。
A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed.
对运动电弧作用下脉冲tIG焊接熔池流场与热场动态变化过程建立了三维数学模型。
The characteristics of flow and heat transfer of sewage are the bases of application of city sewage cooling and heating source.
污水的流动与换热特性是污水冷热源系统分析与应用的基础。
The results show that the Field Coordination Principle can also be applied to the complex flow and heat transfer of tube bundles.
结果表明,场协同原理同样适用于这种形式比较复杂的流动与换热。
The Direct Simulation Monte Carlo method is a useful numerical tool for solving fluid flow and heat transfer problem of rarefied gas.
直接模拟蒙特卡罗方法是一种求解稀薄气体流动换热新的数值方法。
Different mathematical models of flow and heat transfer for the the collector, the chimney and the energy storage layer were developed.
该文分别建立了集热棚、烟囱和蓄热层的流动与传热数学模型。
The other area concerns twofers flow and heat transfer in porous media as widely encountered in energy conversion and electronics cooling.
其二则为能量转换和电子冷却领域中常见的多孔介质两相流动问题。
The temperature distribution of the nozzle guide vanes are affected greatly by the flow and heat transfer of the internal cooling passages.
涡轮叶片内部冷却特性直接影响到叶片的壁面温度分布,必须对其展开详细的研究。
A three dimensional thermal-hydraulic model is developed for the analysis of fluid flow and heat transfer in shell-and-tube heat exchanger.
提出了一种管壳式换热器壳程单相流动和传热的三维模拟方法。
Based on the problems of flowing block and pollution, and flow and heat transfer, presents application characteristics and key technologies.
基于阻塞与污染问题、流动与换热问题,探讨了城市污水的应用特点及其技术关键。
Model that describes the flow and heat transfer in the crystallizer during inverse solidification was developed based on continuum equation.
在连续统一模型的基础上建立了描述反向凝固结晶器中的流动与传热的数学模型。
Then designed two new microchannel heat sinks, analyzed and optimized the two new microchannel heat sinks 'flow and heat transfer performance.
继而设计了两种新型微流道散热器,并分析和优化了两种新型散热器的散热与流动特性。
The study on flow and heat transfer in downcomer under loss of coolant accident (LOCA) is important to the safety of reactor pressure vessel (RPV).
失水事故工况(LOCA)下反应堆下降环腔内的流动和传热研究,对反应堆压力容器(RPV)的安全具有重要的意义。
For this reason, the numerical simulation on the flow and heat transfer in engine water jacket becomes a principal method to optimum cooling system.
因此,内燃机水套冷却液流动数值模拟便逐渐成为目前研究内燃机水套冷却液流动、设计和优化水套结构的重要手段。
An experimental investigation on the flow and heat transfer characteristics in rectangular channel with internal netted rib turbulators is conducted.
本文对网格式肋化内冷通道在静止状态下的强化传热与流动阻力特性进行了实验研究。
On the resistance of capillary hysteresis, the model of high power pulsating heat pipe is improved and the flow and heat transfer are further studied.
在毛细滞后阻力方面,改进了所建立的高功率脉动热管的模型,进一步研究了脉动热管的流动和传热特性。
Two dimensional numerical simulation is presented for flow and heat transfer in rectangular microchannel with uniform wall temperature in slip regime.
在等壁温边界条件下对矩形微细通道速度滑移区的对流换热进行了二维数值模拟。
This paper investigated the behaviors of flow and heat transfer of single-phase in rectangular microchannels with three-dimensional numerical analysis.
通过实验研究了内置均匀加热板的垂直矩形通道入口段混合对流换热的温度场和阻力特性。
Design engineers choose ANSYS FLUENT software for water cooling applications and fluid flow and heat transfer analysis on geometrically complex systems.
工程师选择ANSYSFLUENT对几何形状复杂的产品进行水冷却、流体流动和传热分析。
The mathematical model for two-phase flow and heat transfer of wet steam in exhaust pipe for a 600 MW power generating unit with direct air cooling is established.
建立了600MW发电机组直接空冷排汽管道内湿蒸汽两相流动和传热的数学模型。
The results showed that the present calculation is satisfactory. The basic characteristics of flow and heat transfer inside this rotating disc cavity were revealed.
与实验结果的对比表明本文的计算方法是合理的,计算结果揭示了该型盘腔结构的流动传热基本特征和规律。
The correctness of using periodic unit duct model to simulate the shell-side flow and heat transfer is confirmed for the first time, when using the corrugated tube.
本文首次验证了纵流壳程换热器选用波纹管作为换热元件采用单元流道模型对壳程进行数值模拟的正确性,同时验证了数值模拟结果的正确性。
The results show that the Field Synergy Principle can be applied not only to parabolic flow, but also to complex elliptic flow and heat transfer with recirculation.
结果表明,场协同理论不仅适合于抛物型流动,亦适合于复杂的有回流的椭圆型流动。
应用推荐