The results indicate that the carbon fiber sheet could effectively increase the flexural strength of reinforced concrete columns.
试验研究表明：碳纤维布对钢筋混凝土柱的承载能力具有良好的补强加固效果。
Test and analysis results indicate that mixing fiber into road concrete can decrease the brittleness and promote the flexural strength and abrasion resistance.
试验结果表明，道路混凝土中掺入纤维能明显降低混凝土的脆性，提高混凝土的抗折强度和耐磨性能。
When covered with the sheet the flexural strength of the beam under test became considerably higher than ever and the maximum flexural strength improved drastically.
粘贴碳纤维布后，试验梁的受弯承载力明显提高，其中极限受弯承载力的提高更为显著。
The flexural strength of pultruded FRP shapes is studied.
研究了纤维增强塑料（FRP）拉挤型材的弯曲强度。
The flexural strength and tensile strength slightly decreased.
复合材料的弯曲强度和拉伸强度稍有降低。
Their density, hardness, flexural strength and fracture toughness were measured.
测定了密度、硬度、抗弯强度、断裂韧性等性能指标。
The relationship between nucleation temperature and flexural strength was investigated.
探讨了核化温度与抗弯强度之间的关系。
The flexural strength and flexural modulus decreased with the increasing amount of ABS.
合金的弯曲强度和弯曲模量都随着合金中abs用量的升高而下降。
The similar tendency was also found in the transverse flexural strength of the composites.
在侧向纤维方向的材料弯曲强度也可发现相同的趋势。
Infiltrated ceramics with similar flexural strength have similar microstructures under SEM.
强度相同的四种渗透陶瓷SEM表现也相似。
The contribution of tension flange to the flexural strength of the beam; shear lag concept.
梁的受拉翼缘对受弯承载力的贡献；剪力滞。
Secondly, the influence of the dispersion of CF on conductivity and flexural strength of CFRC are discussed.
然后，本文研究了碳纤维分散性对CFRC的导电性和抗折强度等重要性能指标的影响。
The static test of mechanical properties suggest that the flexural strength of PE/EP is higher than pure PE.
力学性能测试表明，与纯聚乙烯相比，环氧树脂增强聚乙烯材料的弯曲强度有较大提高。
The results show that flexural strength of fresh water ice is closely related to stress rate and temperature.
结果表明，水库淡水冰弯曲强度与应力速率和冰温有着密切关系。
The ratio of flexural strength and compressive strength increases with the increasing amount of waste powder.
随着废胶粉取代量的增加，砂浆试样的折压比值增大。
The influence of hygrothermal environment on flexural strength of composites is greater than flexural modulus.
湿热对复合材料弯曲强度的影响要大于对弯曲模量的影响。
After reaching maximal flexural strength, with the increase in stress rate, the flexural strength decreases instead.
达到极限弯曲强度后，应力速率继续增加，弯曲强度值呈减小趋势。
Objective Infiltrated ceramic is a newly developed material system with high flexural strength for crowns and Bridges.
目的渗透陶瓷是一种新型的高强度全瓷冠桥修复材料。
Objective To study the effects of different treatment methods on the biaxial flexural strength of hot pressable ceramic.
目的研究不同处理方式对白榴石增强陶瓷的双轴弯曲强度的影响。
The ultimate flexural strength of SRC beam calculated by using this method is averagely 26 percent smaller than that of test.
应用该方法计算所得梁的受弯承载力比试验值平均小26%。
With W content increasing, the elastic module, flexural strength and fracture toughness increase, but the Vickers 'hardness decreases.
随w含量的增加，复合材料弹性模量、抗弯强度和断裂韧性增大，而硬度减小。
Testing the setting time, flexural strength, compressive strength, water retention, adhesive strength of gypsum with the adhesive agents.
对掺加粘结剂的脱硫石膏的凝结时间、压折强度、保水性能、剪切粘结强度的测试。
The influence of filling coefficient on mechanical properties, including surface hardness, impact and flexural strength, are investigated.
考察了填充系数对力学性能的影响，包括表面硬度、冲击强度和弯曲强度。
The test conducted includes the temperature, salty, density, crystal structure, uniaxial compressive strength and flexural strength of sea ice.
试验内容包括海冰的温度、盐度、密度、晶体结构、单轴压缩强度和弯曲强度。
After high silica fiber is treated by coupling agent, excellent interfacial cohesion and flexural strength of super-hybrid composite are obtained.
偶联剂处理使高硅氧纤维与树脂基体的粘结强度增加，从而提高复合材料的弯曲强度。
The flexural strength calculated on the basis of the plane section assumption and strain compatibility condition agrees well with the test results.
根据平截面假定和应变协调条件计算的受弯承载力与实测值符合较好。
The result shows that both early compressive and flexural strength of the polymer modified mortar are low, but the late strength increases steadily.
结果表明：改性砂浆早期抗压和抗折强度较低，后期强度有较大持续的增长；
The addition of PS can reduce the dielectric constant of glass-ceramic substrate materials effectively, but reduce the flexural strength at the same time.
在玻璃陶瓷基板材料中加入PS有机球能有效地降低基板的介电常数，但同时影响基板的抗折强度。
The lower enveloping curve of the shear strength control zone can be found from the analysis of shear and flexural strength of reinforced concrete member.
通过对钢筋混凝土构件抗剪强度和抗弯强度关系的分析，能找出剪切强度控制区的下包络线。
The lower enveloping curve of the shear strength control zone can be found from the analysis of shear and flexural strength of reinforced concrete member.
通过对钢筋混凝土构件抗剪强度和抗弯强度关系的分析，能找出剪切强度控制区的下包络线。
应用推荐