In some industrial regions, heavily laden wagons, with flanged wheels, were being hauled by horses along metal rails; and the stationary steam engine was puffing in the factory and mine.
在一些工业地区,马匹正沿着金属轨道拉着满载货物、带法兰轮子的马车;固定的蒸汽机在工厂和矿井里噗噗作响。
Wafer, lug, double flanged and extended body styles.
对夹,凸耳,双法兰和加长阀体类型。
End Connections? Choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
End Connections - choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
Actuator mounting dimensions for flanged ball valves, see pages 77-84.
用于法兰球阀的执行机构安装尺寸,请参阅第77- 84页。
Threaded, flanged and welding connections, corrosion and built-in filter.
螺纹,法兰和焊接等连接方式,耐腐蚀并内置过滤器。
The process of assembling flanged components such as pressure-control equipment.
组合带法兰部件(如压力控制设备)的过程。
The thermowell is a reduced tip flanged fixed type for use with class 300 flanges.
热电偶套管为缩径尖头带法兰固定型,使用300等级的法兰。
Two types of end are standard on steel pipes and fittings that is flanged and screwed.
钢管和管件有两种标准端部型式,即:法兰和丝扣。
Two types of end are standard on steel pipes and fittings, that is flanged and screwed.
钢管和管件有两种标准端部型式,即:法兰和丝扣。
The sealing fuzzy reliability of a flanged system is investigated under the ideal case.
文中对理想情况下法兰的密封模糊可靠度进行了较为详细的研究。
The life of bolted flanged connections was divided into sealing life and component life.
将螺栓法兰连接系统寿命划分为密封寿命和部件寿命。
The paper presents the design principle and application results of the flanged slotting clamp.
介绍翻边瓦铣槽夹具的设计原理及使用效果。
There are several steps to follow to make sure that a flanged joint will be properly assembled.
为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
A. N. S. I. Standard b16.1-covers cast iron pipe flanges and flanged fittings (Class 125 and 250).
标准B16.1 -包括铸铁管道法兰和法兰连接件(125磅级和250磅级)。
Bolted flanged connections are the most commonly used in petrochemical equipment and piping system.
螺栓法兰连接是石油化工设备和管道中应用最为广泛的密封形式。
It's suitable to have shell test and seal test for flanged end butterfly valves and wafer type butterfly valves.
适用于法兰连接和对夹式蝶阀的强度和密封性能试验。
This article describes a hot pressing formation technology to make flanged openings on special jacketed vessel shells.
介绍在特殊夹层压力容器制造中对夹层壳体壁上进行开孔翻边热冲压成形的工艺技术。
For the special flanged head at reducer section on shells, the plan shall depend on the fabrication capacity of plants.
对于壳体上的特殊变径段折边封头,应视工厂加工能力采用相应方案。
In this paper, the vibration characteristics of rotors connected with a flanged coupling in textile machinery are studied.
研究纺织机械中具有凸缘联轴节的转子的振动特性。
Ball Valves with flanged connection to be or an alternative as per Contractor's recommendation, subject to approval by Client.
带法兰连接的球阀或替代阀门由承包商提出建议,由业主批准。
English name :Rolling bearings. Boundary dimensions. Part 4:Flange dimensions of radial ball bearings with flanged outer ring.
简体中文标题:滚动轴承。外形尺寸规格。第4部分:带法兰凸缘外环的径向滚珠轴承的法兰尺寸规格。
The numerical result shows that the maximal stresses of the whole spherical tank locate at the edge of the bottom's flanged opening.
计算结果表明,整个球罐的最大应力发生于球罐底部的凸缘开孔的周边。
Based on this study, formulae and design charts are provided to select readily an economical depth of unequal-flanged steel girders.
根据研究,提出了迅速选择不等翼缘钢梁经济梁高的公式和图表。
The leakage event of a non-asbestos gasket was taken place at the manhole flanged joint of a boiler after more than one-year service.
一台废热锅炉人孔用非石棉纤维橡胶垫片服役一年多后发生泄漏。
This adapter may be threaded or welded onto the casing, and may have a flanged or clamped connection to match the BOP stack or wellhead.
该接头也许是用螺纹与套管连接在一起,或焊接在一起,以及可能还有一个法兰或卡箍连接与防喷器组或井口配接。
The main cause of too small flanged hole end diameter on parts of the Audi car has been found by analysis to be thinning of blank material and rebound.
对奥迪轿车零件翻孔端部直径偏小的分析结果表明,其主要原因是材料变薄及回弹所致。
Certain system configurations involving direct connection of a Swing Check Valve to other flanged equipment may require consideration of this bolt clearance.
某些系统配置,包括旋启式止回阀直接连接到其他法兰设备的场合可能要求考虑这种螺栓所需要的间隔。
The analysis result shows that the influence of the additional flexural torque on the tightness of the bolted flanged connection structure is comparatively...
分析结果表明,附加弯矩对螺栓法兰连接结构的紧密性有较大影响。
The analysis result shows that the influence of the additional flexural torque on the tightness of the bolted flanged connection structure is comparatively...
分析结果表明,附加弯矩对螺栓法兰连接结构的紧密性有较大影响。
应用推荐