The analysis method has some reference value for flange structural optimization of the size.
该分析方法对法兰盘结构尺寸的优化具有一定的参考作用。
The economy analysis is made on the wheelset turning caused by abnormal wear of wheel flange of passenger cars on Qingzang Railway.
针对青藏铁路客车轮缘异常磨耗导致的轮对旋修问题进行了经济性分析。
According to theoretic analysis, computing the bending deflection of every roller is enabled to ignore the effect of the web and only allow to the rectangular section made up of flange plates.
理论分析认为求解各可调辊的压下挠度时,可以不考虑腹板的影响而按翼缘组成的“矩形”断面来进行。
Based on the structural characteristics of bearing flange, the optimization model is established according to the objective function, design variables and constraints, and make a static analysis.
基于支承法兰盘的结构特征,通过目标函数的建立、设计变量的选取以及约束条件的确定建立了优化设计的有限元模型,并对法兰盘进行了静力分析。
In the analysis and design of steel-concrete composite beams, the concept of effective flange width is introduced to consider the impact of shear lag.
钢与混凝土组合梁的设计和分析中,通过引入有效翼缘宽度的概念考虑混凝土翼板中剪力滞后的影响。
This measure method supplies reliable data for security analysis and designing installed flange of steam turbine 's vane.
此项技术可为汽轮机叶片安装轮缘的设计和安全性分析提供可靠依据。
Analysis is made on the dark lines defects occurring over the working surface of flange by measurement with the optical microscope, Scanning electro microscope (SEM) and electronic probe.
针对法兰盘加工面上出现的黑纹缺陷,采用光学显微镜、扫描电镜和电子探针等测试方法对其进行了分析。
Forging forming of heavy flange and fork by different forging equipment has been analysed with die optimization and failure analysis for the purpose of higher productivity and lower die cost.
分析比较了在不同锻压设备上进行重型法兰叉类件锻造成形的特点,对其模具进行了优化设计和失效分析。
By stress analysis, this article gives a calculation method on a spherical cap joining the flange ring by welding.
通过应力分析,给出了带法兰的无折边球形封头的计算方法。
The calculation and analysis showed that the main reason for the flange leakage resulted from the inadequate width of the gasket.
经过计算分析,法兰泄漏的主要原因是垫片宽度不够。
The paper makes a theoretical analysis of the speed frequency response function excited by the tread and flange of the resilient wheel.
文中对弹性车轮踏面、轮缘激励下的速度频响函数进行了理论分析。
The paper described the finite element analysis(FEA) methods using in the mechanical behavior of flange beams and H-beams with trapezoidally corrugated webs.
本文采用有限元的分析方法,分别建立了实腹式工字钢梁和波折腹板H型钢梁的有限元模型。
The tension side of the beam flange which was separated from the beam and the box-column formed the model for analysis.
将梁受拉翼缘单独取出,与箱形柱连接形成分析模型。
Then multiple factor analysis of OSC, including the thickness of outer shell, flange plate and web plate of T-shaped members, with or without ribbed stiffeners, is carried out.
采用有限元模型对外套管式节点进行包括外套管厚度、T型件翼缘厚度、T型件腹板厚度以及有无加劲肋的多因素分析,分析总结了这些因素对节点性能的影响。
The integrated analysis of crack failure for L-B Composite Brake Beam Bar Flange Slab was made by means of SEM, microscope and chemical analysis.
采用残余应力和力学性能测定、化学成分分析、断口扫描及金相检验等方法对铁路货车用l - B型组合式制动梁撑杆翼板产生裂纹的原因进行了分析。
The results of analysis indicate that the flange weakening type rigid connection has bigger connection rigid and better behavior of absorbing earthquake energy.
分析结果表明:翼缘削弱型刚性连接具有较大的连接刚度和理想的耗能性能;
Lipped channel and Z section with compression flange not fully effective, have no more any symmetry, so that their stress analysis become quite complicated.
而翼缘非全部有效的卷边槽钢、Z形钢毫无对称性,使应力分析计算十分复杂。
On the basis of the numerical analysis, forming laws of the metal in the flange area were induced and derived, and the forming velocity equations of metal in the flange area were obtained.
在数值分析的基础上,归纳推导出法兰区金属的成形规律,得到了法兰区成形速度方程。
The dissertation gives out the suggestion of outer diaphragm and flange stiffened joints based on the test, the academic analysis results and relative design codes.
本文根据试验和理论的分析结果,并参考相关设计规程,给出了外隔板式节点、垂直加劲肋式节点的设计建议。
The paper mainly focuses on the analysis of the distribution of stress and strain in the flange of a cup-shaped part during deep drawing, according to the plastic mechanics theory.
用塑性理论求得杯形件拉深成形工艺过程中凸缘部分的应力与应变分布的解析解。
However, it is not seen that quantitative analysis on the effects of vertical roller cone Angle on the flange lateral spread has been performed by far.
然而尚未见到关于立辊锥角对翼缘宽展的影响进行定量分析的报道。
In this paper, a theoretical analysis for the local buckling of the flange plate of the partially encased concrete columns subjected to H-shape steel axis force was presented.
对部分包裹混凝土的H型钢轴压柱翼缘板的局部屈曲性能进行了理论分析。
This paper deals with stress analysis of the dual-flange gland and application of the related formula.
本文提出了双法兰压圈的应力分析和有关公式的应用。
Analysis shows that it is the best way to improve the stress distribution of the twin-box single cross section of cable-stayed bridge by thickening the bottom flange.
分析表明:加厚底板对斜拉桥双箱单室箱形主梁应力分布的改善效果最佳。
Analysis could also show, to improve the stress distribution of the twin-box single cross section of cable-stayed bridge, it is the best way by thickening the bottom flange.
分析还表明,加厚底板对斜拉桥双箱单室箱形主梁应力分布的改善效果最佳。
Analysis could also show, to improve the stress distribution of the twin-box single cross section of cable-stayed bridge, it is the best way by thickening the bottom flange.
分析还表明,加厚底板对斜拉桥双箱单室箱形主梁应力分布的改善效果最佳。
应用推荐