Fifth, can see the flame combustion.
看火焰能不能完全燃烧。
The basic concepts and applications of the solid flame combustion synthesis are reviewed.
对固体火焰与燃烧合成的基本概念与应用进行了综合评述。
The physical process of boiler flame combustion and radiation and the three-colour method using color CCD theory are studied.
研究了锅炉火焰燃烧和辐射的物理过程以及采用彩色CCD的三色测温的原理。
This paper describes in detail the components and structure of W -type flame combustor, as well as W- type flame combustion technology and its adjustment method.
介绍了W形火焰燃烧器的组成和结构，W形火焰燃烧技术及调整方法。
Highlighted is the realization of the technical principle of fuel pre evaporation by utilizing the cold flame combustion phenomenon normally present prior to the ignition of liquid fuel.
重点介绍了利用液体燃料着火前存在的冷焰燃烧现象实现燃料预蒸发的技术原理。
As a new way of combustion, catalytic combustion breaks the flammable limits of conventional flame combustion, and realizes the combustion of ultra-natural gas/air mixture under the flammable limits.
催化燃烧作为一种新的燃烧方式，打破了传统火焰燃烧的可燃界限，实现了贫甲烷/空气混合物在可燃界限以下的燃烧，燃烧效率高，提高了能源利用率。
The furnace flame detection system has wide application foreground. It is a valuable researching direction on combining image processing and combustion control.
全炉膛火焰检测系统具有广阔的应用前景，图像检测和燃烧控制相结合是一个有价值的研究方向。
The nozzle spray characteristics of micro-turbine engines affect the stabilization of flame of the combustion chamber, the distribution of temperature, and the efficiency of combustion.
针对微型燃气涡轮发动机喷嘴的雾化对燃烧室火焰稳定性、温度分布和燃烧效率的影响。
With the constantly increasing of output of engines and the more stringent exhaust emission regulations, it is necessary to measure the combustion flame temperature of the engines.
在发动机的不断强化和对排放日益严格的限制下，有必要对燃烧过程的火焰温度进行测试。
Flash fire - the combustion of a flammable gas or vapor and air mixture in which the flame propagates through that mixture in a manner such that negligible or no damaging overpressure is generated.
暴燃-可燃气体或蒸汽及空气混合物的燃烧，火焰通过混合物传播，产生了可以忽略的超压或不会造成损坏的超压。
Monitor and control the flame temperature during the combustion process, reducing fuel use to achieve the same energy production Numbers, while helping to reduce GHG emissions to regulatory levels.
监控和控制燃烧过程中的火焰温度，减少燃料用量达到相同的能源生产数，同时有助于减少温室气体排气放，符合管制水平。
The input variables of neural network are the combustion parameters that symbolize flame image. In this paper, we give out the definitions for these parameters and their solution method.
神经网络的输入变量为表征火焰图像的燃烧参数，本文给出了这些参数的定义即其求解算法。
They may react with chemical species within the flame to stop the combustion reaction.
阻燃剂可以与火焰中的化学物质起反应，使燃烧反应终止。
This paper presents the combustion efficiency characteristics of an afterburner with bluff-body flame holders investigated with both numerical and experimental methods.
本文对装有钝体火焰稳定器的加力燃烧室燃烧效率特性进行了数值分析和实验研究。
The effects of temperature and equivalence ratio of supersonic premixed combustible flow on the structure of supersonic combustion flow field, ignition and flame propagation were studied.
研究了超声速预混可燃气流的温度以及当量比对超声速燃烧流场结构、点火与火焰传播特性的影响。
It is widely used on flame control in the combustion control system and air-burner heat system of various industry kiln.
广泛应用于各行业工业炉窑燃烧控制系统及大气烧嘴加热系统的火焰控制中。
The method can be used as measure analysis of hydrocarbon-air combustion flame.
该方法可用于烃类-空气类燃烧火焰的测量分析。
As a kind of energy, photons in combustion reaction directly affect flame temperature in terms of Numbers and wavelength.
由于光子是一种形式的能量，因而燃烧反应发出的光子的数量和波长将直接影响到火焰的温度。
Then the influence on flame structure of supersonic combustion of ratio of length and deep of cavity, obliquity of back edge of cavity and different schemes of fuel injection were studied.
用这种方法研究了不同凹腔长深比、凹腔后缘倾角和不同燃料喷注方案对超声速燃烧火焰结构的影响。
This paper presents a combustion evaluation function based on flame color image classification after analysing the influential factors on the burning efficiency of industrial oil furnace.
本文在分析了影响工业燃油炉燃烧效率因素的基础上，提出了一种基于火焰彩色图像像素分类的表征燃烧状况的指标评价函数。
These flow characteristics can be favorable to ignition, flame stabilization and combustion intensification.
这些特征都有利于点火，火焰稳定及强化燃烧。
This paper introduces a method of measure analysis of methane-air premixed combustion flame component and concentration, and divides reactive, productive and environmental areas of flame.
本文介绍一种测量分析甲烷-空气预混燃烧火焰成份及其浓度的方法，并划分出火焰的反应区、产物区和环境区。
The effect of intumescent flame retardant(IFR)on the combustion and smoke of low-density polyethylene(LDPE)was studied by cone calorimeter.
用锥形量热法研究了膨胀型阻燃剂对低密度聚乙烯燃烧和发烟性能的影响。
The combustion form of rich flame is part-premixed combustion and lean flame is premixed combustion.
浓火焰燃烧形式为部分预混燃烧，淡火焰的燃烧形式为全预混燃烧。
The combustion wave temperature profiles and flame structures of fuel-rich propellant containing boron are measured by using W-Re micro-thermal couple and flame photo technique.
通过微热电偶测温和火焰单幅照相技术测试了含硼富燃料推进剂燃烧波温度分布及燃烧火焰结构；
Experimental investigation on supersonic combustion of kerosene was conducted using fuel-rich hot gas as pilot flame on direct-connect supersonic combustion facility.
对采用高温富油燃气作引导火焰的煤油超声速燃烧进行了研究。
The technical principles of pre-evaporative combustion of liquid fuels are described and the problem of flame stabilization during the pre-evaporative combustion of light oil is analyzed.
介绍液体燃料预蒸发燃烧的技术原理，分析轻油预蒸发燃烧中的火焰稳定问题，并重点介绍目前在实现轻油预蒸发燃烧中所采用的若干稳焰措。
The article elaborates on the theory of flame stability, combustion equilibrium, and some factors affecting flame propagation speed.
在理论上阐述了完全预混式燃烧器火焰稳定原理、燃烧的稳定性和影响火焰传播速度的几种因素。
According to GB8624-1997 "building materials combustion performance of grading method", this product is the B1 level flame retardant materials to ensure safe and reliable.
按GB8624- 1997《建筑材料燃烧性能分级方法》，本产品为b1级难燃材料，确保安全可靠。
According to GB8624-1997 "building materials combustion performance of grading method", this product is the B1 level flame retardant materials to ensure safe and reliable.
按GB8624- 1997《建筑材料燃烧性能分级方法》，本产品为b1级难燃材料，确保安全可靠。
应用推荐