In order to call a method from XSL, that method must first be written and its compiled form placed in the classpath of the application that is performing the XSL transformation.
为了从XSL调用一个方法，必须首先编写那个方法，并将它的已编译形式放在执行xsl转换的应用程序的类路径中。
Within the method, the first order of business is to write the object (or, in this case, the integer) to the ZeroBuffer instance held internally, by calling the put method on it.
在该方法中，业务的第一个顺序就是调用内部持有的ZeroBuffer实例的put方法，把对象(或者在这个示例中是整数)写到ZeroBuffer实例。
In order for a PERL program to transform a dynamic SQL statement into executable form, you need to first use the prepare method, and then bind parameters using the bind_param method.
为了让Perl程序将动态sql语句转换成可执行的格式，需要首先使用prepare方法，然后使用bind _ param方法来绑定参数。
That is, a call to obj.method() in a traditional OOP language will look through the method resolution order (MRO) of an object to find the "first" ancestor class of obj that has a method .method().
也就是说，在传统OOP语言中的obj.method()调用会通过对象的方法解析次序（method resolution order，MRO）寻找 “第一个”具有 .method() 方法的 obj祖先类。
The first of these is tied tightly to the setOrderNumber() method shown in Listing 4; the second would need to then look up an order number. Listing 5 shows simple code to handle this task
第一个操作被紧密地绑定到清单4 所示的setOrderNumber()方法，第二个操作则需要查询订单号。
In the first part, we develop the method used for the construction of the third order perturbations with respect to the masses.
在第一部分，我们提出了用于构建把有关质量的摄动展开到三阶的方法。
The steps are as follows: First, motion area is extracted based on high-order statistics detection method and motion information of multiple frames.
其基本思想是：首先根据多帧帧差信息，基于高阶统计检测方法提取运动区域。
First, the basic theory and several computation analysis methods of reliability are discussed, and the First Order reliability method (FORM) and Monte-Carlo method are emphasized.
首先介绍了工程结构可靠度理论及分析计算的若干方法，重点阐述了FORM法和蒙特卡罗法。
The first order optimization method is used to determine the rational construction cable forces and the prearranged Angle of girders.
本文以某千米级斜拉桥为例，采用一阶最优化计算方法来确定斜拉桥的合理施工状态。
It is usually use first-order method such as effective lengths method in engineering practical stability compute. Because of much hypothesis adopted, so it can only make approximate analysis.
在工程实际的框架稳定计算中，一般采用计算长度法等一阶近似计算法，由于采用了较多的假设，因此只能进行近似线性计算。
The linear polarizabilities, the first-and second-order hyperpolarizabilities of these squaraines were calculated using TDHF method.
在此基础上用TDHF方法计算了分子的线性极化率、一阶和二阶超极化率。
Based on reliability theory, the first order second moment method (JC method) is adopted to analyze and compute the fatigue reliability.
基于可靠度理论，本文采用一次二阶矩法(JC法)对疲劳裂纹扩展可靠性进行计算。
Two graphical methods used in first-order predicate logical reasoning, that is goal-guiding graphical reasoning method and transition frame graphical reasoning method, are presented.
提出了两种用于一阶谓词逻辑推理的图形方法：目标制导的图形推理法和变迁框图形推理法。
The acid-catalyzed hydrolysis of epichlorohydrin is studied with the method of dimensionless parameter for the first order reactions In this paper.
用一级反应的热动力学无量纲参数法研究了环氧氯丙烷的酸催化水解反应。
Within the method of first-order trend OK, Gaussian semi-variogram model performed better than both the spherical and exponential models.
一阶趋势的OK方法中半方差函数模型选用高斯型的比选用球状和指数型的插值效果相对要好。
Secondly, the procedure of tunnel lining based on First Order Second Moment(FOSM) and JC method is presented to calculate the reliability of tunnel lining.
根据提出的可靠度计算理论和方法，编制了基于一次二阶矩和JC法的可靠度计算程序。
This paper puts forward a new MRACS method using low order model, i. e. the fourth order hydraulic servo system following the first order reference model.
本文把液压伺服系统作四阶系统，跟随一阶参考模型，提出了一种新的高阶对象和低阶模型的MRACS 的方法。
Taking higher frequency modes into account, an accurate expansion method based on the improved first-order perturbation is put forward, which can improve the precise of modes obviously.
为此，考虑到高阶模态的影响，提出了基于改进一阶摄动法的模态高精度展开法，算例表明，此方法能显著地改善摄动特征解的精度。
This paper discusses briefly survey method and basic principle of RTK. The precision and result of RTK and urban First-order traverse survey is compared and analyzed.
对rtk的基本原理作了简述，并对rtk的测量方法作了讨论，与城市一级导线测量结果进行了比较及精度分析。
The traditional three factors method ford-c first-order linear circuit is only one special example of the new method being discussed.
应用四要素法对周期信号和非周期信号激励的一阶电路作了较详细的分析；
This result can be used to prove the completeness theorems of first order logic system and the universal refutation method proposed by us.
这一结果可以用于证明一阶逻辑形式系统和我们所提出的广义反驳方法的完备性。
The first-order second-moment method is fundamental in structural reliability analysis, its accuracy depends upon the nonlinear extent of performance functions around checking point.
一次二阶矩方法是结构可靠度分析的基本方法．一次二阶矩方法的计算精度依赖于验算点附近功能函数的非线性程度。
General analytic solutions for transverse bending of anisotropic rectangular plate using first order shear deformation theory is obtained at the first time by the complex series method (CSM).
采用复级数方法首次建立了基于一阶剪切变形理论的各向异性矩形板横向弯曲一般解析解。
The initial imperfection and the strength parameters are considered as random variables. Ply-level failure probability is evaluated by the first order reliability method.
初始缺陷和强度参数为设计变量，采用一阶矩法计算单元层的失效概率。
The advanced first order and second moment iterative method are employed for calculation on reliability index and failure probability.
采用改进的一次二阶矩法对腐蚀管道的可靠性指标和失效概率进行了分析和计算。
The parameters of the model are fuzzily processed and the fuzzy risk can be evaluated by using the modified first order second moment method.
通过对模型中的参数进行模糊化处理，用改进一次二阶矩法计算了地下水过量开采的模糊风险率。
The first-order mode and the first eigenfrequency of the pier can be obtained easily and precisely by the impact vibration test method, from which three indexes such as the chang.
利用冲击振动试验法可以准确得到桥墩的一阶振型和一阶频率，利用这两个参数可以构造出一阶振型比、特征参数、一阶曲率模态差三个指标。
Based on the first order eigenvalue sensitiveness analysis and linear estimation, this paper further suggests a second order eigenvalue sensitiveness analysis method.
本文在一阶灵敏度分析及线性估算的基础上，进一步提出二阶灵敏度方法。
The authors updated clause searching method to first-order by partial instantiation method.
结合部分实例化方法将子句搜索方法提升至一阶。
This model can also show the effect of the parameters of the wedge. By the first-order method in the optimized design module of ANSYS, the optimized design program is worded out in the APDL language.
采用有限元分析软件ANSYS中自带的优化设计模块中的一阶优化方法编制了APDL语言优化设计程序。
应用推荐