Firmware program design mainly shows the step of development and flowchart with corresponding code segment.
固件程序设计主要说明开发的步骤和流程图，并辅以相应的代码段。
In this paper, the hardware circuit design of USB interface based on PDIUSBD12 chip is introduced, meanwhile implement of USB firmware program...
文中介绍了基于PDIU S - BD 12芯片的USB接口的硬件电路设计，并介绍了USB固件编程的实现。
Then, the whole systematic architecture, some hardwares and firmware program were detailed, finally, the main program and interrupt service program were provided.
洋细论述了系统的总体结构、部分硬件设计和相应固件程序的实现，给出了主程序和中断服务程序流程图。
Electrical connection, data processing, firmware program design are also explained in detail. And design of USB drive and application in PC are simply illustrated.
介绍了U SB硬件电气连接、数据处理，以及固件程序设计方法，并对PC机应用程序设计和固件驱动做了简要说明。
The hardware design using AT89S51 micro-controller and PDIUSBD12 and TLC2543 chips to achieve USB data transfer is carried out. And the firmware program design is introduced in detail too.
介绍了AT 89s51和PDIUSBD12固件的特点，以及采用AT 89s51单片机结合PD IUSBD12和TLC2543芯片实现USB数据传输的硬件设计，对固件编程的具体实现给出了详细说明。
In the aspects of software modularization, emphasize to analyze USB device firmware, driver program of computer operating system and interface program-three parts of programming method.
在针对软件的模块化方面，着重分析了USB外设端的固件、主机操作系统上的客户驱动程序以及操作界面程序三个部分程序编写方法。
According to test flow, the host program and its partial code are given, and according to the hardware structure of switch matrix, the firmware of each part is also given.
根据测试流程，给出了主机控制程序设计及部分实现代码，并针对开关矩阵硬件构成，分别给出了各个组成部分的固件程序代码。
FIRMWARE: a program permanently recorded, e. g., in ROM.
固件：永久记录程序，例如，只读存储器。
The design of the software includes three parts as following: the network communication between PC and controller, NAT9914 firmware and DLL (dynamic link library) program.
软件部分的设计共包括三大部分：PC机与控制器间的网络通信机制，NAT9914固件程序以及动态链接库程序。
The design of architecture of firmware, GUI, data structure, communication protocol, and program of the instrument of line patrol are presented in the thesis.
对嵌入式巡线仪中固件体系结构、GUI、数据结构、通信协议、程序进行了设计与实现。
There were analog multiplexers, A/D conversion(analog digital conversion), FIFO module, CPLD module in the hardware design and CPLD program, USB firmware, USB driver in the software design.
在硬件上包含多路开关、模数转换、FIFO模块、CPLD模块、USB模块； 在软件上包含CPLD编程、USB固件、USB驱动以及应用程序。
Serial communication program, multi-threaded communications, serial port COM10 solve the above problems, especially for firmware development programs.
说明：串口通讯程序，多线程通讯，解决了串口COM10以上的问题，特别适合开发固件程序使用。
In one embodiment, a firmware component within the data processing system, during initial program load, determines that a first resource has failed.
在一实施例中，数据处理系统中的一个固件组件在初始程序装入期间确定第一资源已出故障。
The software is consisted of firmware, driver, and application program.
软件程序主要包括固件程序、驱动程序和应用程序三部分。
The software part, which is also as firmware, mainly includes real time operating system (RTOS), MAC application program and C code for interface modules.
软件设计主要是嵌入式系统的固件设计，包括实时操作系统（RTOS），实现MAC功能的程序，接口硬件C程序三部分。
MCU firmware design focuses on the structure and the realization of firmware, HID class devices developing, report descriptors establishment and ADS7843 sampling program design.
单片机的固件程序设计部分主要介绍了固件的结构以及实现，HID类设备的开发及报告描述符的建立和ADS7843的采样程序设计。
The loader is totally skinable but the downside is that you need to run a program on your PC that embeds the picture files into the firmware upgrade (ezfla_up. bin) and then upgrade the loader.
内核可以更换皮肤，但是不爽的是你必须在电脑上运行一个程序让图片嵌进想要升级的内核里然后再说升级内核。
This makes it suitable for storage of program code that needs to be infrequently updated, such as a computer's BIOS or the firmware of set-top boxes.
这使计画需要稀少地被更新的密码储藏的它适当，像是计算机的基本输出入系统或组的固件-顶端入盒中。
Two means of hardware interface is introduced in detail. 3 The software design of the communication board includes the firmware, the driver and the communication application program.
固件开发部分介绍了固件的整体设计思想及其层次结构、各个部分的设计方法、给出了关键部分的源代码和程序流程图、程序调试过程。
Two means of hardware interface is introduced in detail. 3 The software design of the communication board includes the firmware, the driver and the communication application program.
固件开发部分介绍了固件的整体设计思想及其层次结构、各个部分的设计方法、给出了关键部分的源代码和程序流程图、程序调试过程。
应用推荐