This paper deals with the interaction between shear wall and its foundation using finite element method.
本文采用有限单元法对建在多层地基上的剪力墙， 基础和土进行了共同作用分析。
A hyper finite element method applied to the structural analysis of shear wall is presented which is a new numerical method used for analyzing large scale complicated structure.
提出了一种用于剪力墙结构分析的超级有限元方法。超级有限元法是一种用于分析大型复杂结构的新的数值方法。
The finite element analysis showed that the normal stress distribution of the grillage wall was about the same as that of the solid wall.
有限元计算表明，网格墙在轴力和水平力作用下的正应力分布与实体墙总体上一致；
Based on completion of wall strength calculation, then do the finite element stress analysis.
在完成管壁强度计算的基础上，进行管壁有限元应力分析。
This paper gave the computer simulation of natural frequencies and vibrational modes of truck frames, based on the structural features of the frame, by finite element method of thin wall rod system.
本文根据汽车车架结构的特点，应用薄壁杆系有限单元法，对汽车车架的固有频率和主振型进行了计算。
Based on CAD, automatic mesh generation and AI reasoning techniques, the problem solving framework for finite element modeling (FEM) of aeronautical thin wall structures is introduced.
介绍了利用CAD、网格自动剖分和人工智能技术相结合进行航空薄壁结构有限元建模的问题求解框架。
Non-linear finite element analyses were also carried out and the stress distribution pattern in the wall was consistent with the experimental results.
对试件进行了非线形有限元分析，得到的应力分布与试验破坏现象一致。
Finite element analysis shows that the lateral stiffness of the concrete grill wa ll can be calculated by an equivalent solid shear wall with the thickness of two third of the original wall thickness.
有限元分析结果表明，保温砌模混凝土墙的抗侧刚度可用厚度为其三分之二的等效实体墙计算或用小开口整体墙计算。
Through experimental study and finite element analysis, we draw that the vertical holes in the hollow shear wall structure with seams lessen self-weight so as to lower the earthquake action.
试验研究和有限元分析得出：此种带缝空心钢筋混凝土剪力墙结构中竖向孔洞的存在减轻了结构的自重，因而降低了结构的地震作用。
The ground surface settlement and lateral deflection of retaining wall for deep excavations are calculated using nonlinear finite element method.
利用非线性有限元方法计算了深基坑开挖引起的地表沉降量与墙体侧向挠度。
With use of the finite element computation, the equivalent temperature stress distribution law and the prestress distribution law of overlong exterior wall of basement are acquired.
使用有限元仿真技术计算了上海科技馆地下室超长弧形墙体的当量温度应力分布规律和预应力应力场分布规律。
The stress fields of bolted glass curtain wall under wind load were studied by means of finite element method and the features of the stress states round holes in bolted glass were discussed.
采用有限元方法计算了点接式玻璃幕墙在风荷载作用下的应力场，并讨论了孔边应力特性。
With the results of the multi-ribbed wall tests and finite element analysis, the shear capacity formulas of a oblique section based on ultimate balance theory are given.
并在试验结果与有限元模拟的基础上，依据极限平衡理论，建立起来复合墙体的斜截面抗剪极限承载力公式。
Based on analyzing the wall thickness design and stability checking method of drum, the finite element analysis of the crane 'drum is studied.
在分析传统卷筒壁厚设计与稳定性校核方法的基础上，对起重机卷筒进行了有限元分析。
A finite element program of wall beam structure under elastoplasticity condition is compiled based on the plastic theory and used to test some practical samples.
并基于塑性理论，编制了“墙梁结构弹塑性有限元法计算程序”，对一些算例进行了验算，得到较好的结果。
This article has described the matrix matching method as well as its application in the finite element of the interface mechanical heat stress on the masonry envelop in the wall of melting furnace.
介绍了矩阵对号入座法，在熔炼炉砌体中的界面力学热应力有限元中的应用。
The paper uses finite element analysis software ANSYS, simulating and analysing the experimental process of Carbon Fiber Reinforce Plastic strengthen brick masonry wall.
采用有限元分析软件ANSYS，对碳纤维布加固砖砌体墙的试验过程进行了模拟分析。
A finite element model for nonlinear dynamic analysis of reinforced concrete block shear wall is pointed out.
本文提出了配筋砼砌块剪力墙非线性动力分析有限元模型。
For controlling the cracks in concrete small hollow block building(CSHBB) wall, a nonlinear finite element method was proposed.
为了控制混凝土小型空心砌块建筑（CSHBB）中的墙体裂缝，提出了一种非线性有限元分析方法。
In this paper, a rigid striped reinforcement of reinforced earth-retaining wall is analysed by nonlinear finite element methods.
本文研究内容为刚性拉筋的条带式加筋土挡墙非线性有限元分析。
The machining deformation of aeronautical thin-wall arc shaped workpiece is investigated by using the finite element simulation technique.
采用有限元模拟技术研究航空薄壁弧形结构件加工变形问题。
A finite element program of wall beam structure under elastoplasticity condition is compiled based on the plastic theory and used to test some practical samples. The result is perfect.
并基于塑性理论，编制了“墙梁结构弹塑性有限元法计算程序”，对一些算例进行了验算，得到较好的结果。
This paper introduced the method and result of conducting a finite element analysis on the cold forged reinforced thick wall tee joint.
本文介绍了对冷锻厚壁加强三通进行有限元分析的方法和结果。
Incorporating with the model dynamic experiment and Finite-Element seismic analysis of a shear-wall superhigh building, paper gives the earthquake resistant behavior of such structures.
本文结合一超高层钢筋混凝土剪力墙一核心筒结构的模型试验与有限元动力分析，对超高层筒体结构的动力特性作了具体研究分析。
The influence of wall thickness nonuniformity on the property of the expandable casing is analyzed by the finite element analysis.
采用有限元法分析了壁厚不均缺陷对膨胀套管性能的影响。
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS.
采用ANSYS有限元程序对两边连接钢板剪力墙进行数值模拟分析。
To investigate the hysteresis behavior of composite steel frame with PR connection-reinforced concrete infill wall structural systems, a nonlinear finite element program SRCWNP was developed.
为了系统研究半刚接钢框架-RC剪力墙结构的滞回性能，编制了非线性有限元程序SRCWNP。
A special finite element method program is compiled for the continuous wall beams in this paper.
针对连续墙梁编制了专用的有限元法分析程序。
A special finite element method program is compiled for the continuous wall beams in this paper.
针对连续墙梁编制了专用的有限元法分析程序。
应用推荐