Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
通过对比浮钳式盘式制动器各零部件的有限元模态分析和试验模态分析所得出的模态阵型，验证了有限元模型的正确性。
Using nonlinear finite element method, the compression load deflection of the seal was analyzed and cross sectional shape of the seal was optimized.
利用非线性有限元法分析了密封条的压缩受力变形特性，根据结构力学原理对密封条横截面形状进行了优化。
Finite integration technique (FIT) is used to simulate the effects of shape change and optical printing precision on resonant frequency and the pass band of negative refractive index material.
下面利用有限积分法模拟形状变化和光刻精度产生的缺陷对负折射谐振频率和通带的影响。
Due to high computing precision and processing arbitrary structure shape, finite element method (FEM) can become proper method to solution this problem.
具有较高计算精度并能够处理任意结构形状的有限元素法可作为求解该问题的合适的方法。
During the evolution process, the used finite element participated the evolution and the shape optimization of supporting structure.
在整个演化程序的进行中，所用有限单元既可以参与演化，又可以参与支撑结构的形状优化。
We now apply CFDTD(conformal finite difference time domain) method to theoretically analyzing microstrip patch antenna whose patch shape is more complicated.
应用共形时域有限差分法（CFDTD）对不同形状微带贴片天线的特性进行了有效的分析。
With the Finite Element Method, we analyze and compare the stress conditions of different slips teeth shapes, obtain a more reasonable slip teeth shape.
运用有限元方法对不同形状的卡瓦牙齿的应力情况进行分析比较，得到较为合理的卡瓦牙齿形状。
Shape function used for describing displacement distribution in element determines the speciality of the element in the finite element methods.
在有限单元法中，形函数用于描述单元内位移分布，决定着单元的特性。
Based on the reduced scale ring rolling and finite element simulation materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
摘要研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
The concept of dynamic constraint mode functions for elements of a frame is introduced and it is used to form the dynamic shape function matrixes of each order for the finite elements of a frame.
文中阐述了框架结构有限单元各阶动约束模态函数的概念，并用它组成结构有限单元各阶动态形函数矩阵。
A dynamic model of the towed system was established in the non-uniform wake flow field, and the shape of the towed system was investigated by finite difference method.
建立了水下拖曳系统在非均匀流场中的力学模型，用有限差分法计算收放缆时拖缆的姿态。
The influences of the finite plate thickness and the orifice shape are also taken into account.
模型中还考虑了实际应用中经常遇到的小孔形状和穿孔板厚度两个重要因素。
The dynamic load identification is formulated by time finite element model with shape function of generalized orthogonal polynomial in this paper.
本文利用广义正交多项式作为时间有限元的形函数，推导了基于时间有限元的动载荷识别模型。
A hybrid smart structure integrated with shape memory alloy slims and piezoelectric ceramic patches as united actuators, was presented and modeled by finite element methods.
提出了嵌入形状记忆合金丝和压电陶瓷片作为联合变形驱动器的二元智能结构，并建立了有限元模型。
By simulating the features of two -, three -, four-high mill with finite element method, the geometric shape, micro-structure and mechanical property of wire section are analyzed.
分析了用有限元法模拟线材二辊、三辊和四辊轧机轧制的特点，对线材断面的几何形状、微观组织和机械性能进行了介绍。
Based on the theory of surface diffusion, a finite element method was developed to simulate shape evolutions of two-dimensional microcracks with surface perturbation.
根据表面扩散控制下物质迁移规律，建立有限单元法，对裂面形貌扰动下二维微裂纹演变过程进行数值模拟。
It has been shown in this paper, that in solving radiation heat transfer problems for finite element model of mechanical construction it is necessary to compute the shape factor matrix.
本文说明了在用有限元模式对机械结构的幅射换热问题进行求解时，必须计算形状因子矩阵。
In accordance with the theory of contact mechanics an analysis is made upon rolling bearings by means of finite element method and a new method of unsymmetric shape modification for roll...
根据接触力学理论，通过有限元方法对滚动轴承的分析，提出了滚子非对称修形新方法。
With the help of a finite difference method a temperature field distribution calculation is conducted of a membrane water wall, a tube wall with an irregular shape.
采用有限差分方法对膜式水冷壁这一形状不规则的管壁进行温度场分布计算。
Because of its adaptation to shape and high precision, the finite element method has a more and more important role in the analysis of optical waveguides.
作为一种重要的数值分析方法，有限元法凭借其对光波导任意形状的适应性、高的计算精度等特点，将在光波导分析中起到越来越重要的作用。
The finite element analysis model to the U shape bellows is presented and calculated by the ANSYS program under diverse loads for in plane instability.
建立了U形无加强波纹管结构分析的有限元分析模型，采用ANSYS有限元软件对其在不同平面失稳工况下的应力响应进行了计算。
In this paper, the finite element method for U shape yieldable steel ribs is presented.
本文提出采用有限元法对U型钢可缩性支架进行计算。
A curve of a real brain shape is simulated with the curve-fitting methods and EIT in the brain is finished with finite-element methods and Equipotential Lines Back-Projection algorithm.
方法：利用曲线拟合方法模拟大脑外形曲线，借助有限元方法和等位线反投影算法完成脑eit仿真成像。
The vacuum shape change of vacuum target chamber in prototype facility has been analyzed using finite element method.
用有限元方法分析了原型装置真空靶室的真空形变。
Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
The discussion of the paper indicates that the current model of shape optimization by finite element method is a special case of the general model in this paper.
本文论述表明，现有的有限元结构形状优化设计模型仅是本文广义模型的特例。
The discussion of the paper indicates that the current model of shape optimization by finite element method is a special case of the general model in this paper.
本文论述表明，现有的有限元结构形状优化设计模型仅是本文广义模型的特例。
应用推荐