The chemical process does not rise above a conditioned and finite process.
化学过程仍然只是一有限的受制约的过程。
Typical language constructs allow for defining a process either in the form of extended flowcharts or finite state machines.
典型的语言构造允许以扩展流程图或者限定状态机器的形式定义流程。
Business state machines - Models a business process as a finite set of states and event transitions.
业务状态机——将业务流程建模为有限的状态和事件转移集。
Because of considering the influence of ground surface, the finite model can be used for analyzing the long period heat transfer process.
而有限长的传热模型由于考虑了地面作为传热边界对地下传热过程的影响，能够用来分析长时间的传热分析。
It is significant to study the contact area in rolling process and simplify model of finite element.
对研究花键冷滚压成形过程中的接触面积和有限元模型的简化具有重要的意义。
In the process of completing, the mechanism design requests are considered fully, some methods such as the computer assistant simulation design, finite element analysis and test verify are adopted.
在完成过程中，充分考虑了铺设轮的机械设计要求，采用了计算机辅助仿真设计、有限元分析和试验校验的方法。
The effects of matching materials on the brake temperature of braker were investigated by using the finite element method to simulate the temperature transient process of disc brake.
采用有限元法模拟盘式制动器制动过程瞬态温度场，研究了材料匹配性对制动器温度场的影响。
As to the powder compaction process, finite element software MSC.
对于粉末压制成形过程，利用有限元软件MSC。
The paper describes a finite element simulation technique of the crack growth process in the homogeneous or inhomogeneous solids.
讨论了材料断裂过程的有限元模拟技术。
In this paper, we present the computational methods of periodic orthogonal spline wavelets, which can be used to process the problems on the finite interval.
给出了周期正交样条小波的计算方法。用这种周期正交样条小波可方便地处理有限区间上的问题。
This paper focuses on the use of finite element analysis software, the threshing cylinder axis static finite element analysis process.
为此，着重研究了利用有限元分析软件对脱粒滚筒轴进行有限元静力分析的过程。
The paper presents an study of copper clad steel wire produced by liquid and solid bonding method. Using the finite difference equation, the dipping process is analyzed.
以液固相反向凝固法生产的包铜钢线为研究对象，利用有限差分法分析了铜在钢线芯体上的浸覆过程；
A new modeling technique was developed to overcome the difficulties and deficiencies in available finite element modeling process for complicated gears.
针对复杂齿轮现有有限元建模过程中的诸多困难和不足，提出一种新的建模方法。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.
用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。
Second, using large-scale finite element method software—MARC establishes the rolling model, and compiles the process file, and sets up the different rolling condition parameters.
运用大型有限元软件MARC，建立轧制模型，编写过程文件，设置不同的轧制条件参数。
The thesis provides the concept of variable rigid body which simulates the grouting, and simulates the process of shield tunneling with finite element method (FEM).
本文提出了用变刚体模拟注浆体性质随施工过程的变化，用有限单元法模拟盾构法隧道施工的全过程。
The results were compared with the local values of strains and temperatures during the forging process predicted by the finite-element program.
所得结果与通过有限元分析所得的锻造过程中局部张力及温度进行对比。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
The temperature field and microstructure field during laser heat treatment process were calculated using Finite Element Method or Finite Difference Method.
应用有限元和有限差分方法对激光热处理过程的温度场、组织场进行了数值模拟计算。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
During the evolution process, the used finite element participated the evolution and the shape optimization of supporting structure.
在整个演化程序的进行中，所用有限单元既可以参与演化，又可以参与支撑结构的形状优化。
The rolling process of medium plate was analyzed with the explicit dynamic finite element method.
采用动态显式有限元法对中厚板轧制过程进行了分析。
With the application process, the finite element method, principle and influencing factors of automobile cover punching are described.
结合这一应用过程阐述了汽车覆盖件冲压数值成形有限元方法、原理及影响因素。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
The transition of the jumping parameters in systems is governed by a finite-state Markov process.
系统中的跳变参数可以通过有限状态马尔可夫过程来描述。
Simulating the metal plastic forming process by finite element method has become a crucial question in the plastic forming study.
用有限元法模拟金属塑性成形过程已成为塑性成形研究的中心问题。
Sheet metal digital incremental forming process is simulated with finite element software LS_ DYNA.
利用有限元软件LS_DYNA模拟金属板材单点渐进成形过程。
Sheet metal digital incremental forming process is simulated with finite element software LS_ DYNA.
利用有限元软件LS_DYNA模拟金属板材单点渐进成形过程。
应用推荐