The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
The finite deformation elastic-plastic finite element formula are given. Based on the ANSYS software, the application of elastic-plastic FEM on metal plastic process field is outlined.
给出了有限变形弹塑性有限元列式，基于A NSYS软件平台，介绍了弹塑性有限元法在金属塑性加工领域中的应用。
The billet deformation behavior, the magnitude and distribution of effective strain and damage value were investigated by rigid-plastic finite element method during multi-axial compressions.
采用刚塑性有限元法研究了多轴压缩过程中的坯料变形行为、等效应变大小、分布以及损伤值。
In this paper, an engineering assessment method of elastic-plastic fracture based on finite deformation analysis of complex structures. or a modified COD -design equation, presented forward is put.
文章在有限变形分析基础上建立了对复杂结构进行弹塑性断裂评定的工程方法，用以修正COD设计曲线。
Establish finite element model, and use elastic - plastic mechanics to discuss stress-stain state of elastic and plastic deformation in cutting zone.
根据正交切削特点建立了有限元模型，应用弹塑性力学讨论了切削变形区的弹、塑性阶段的应力、应变状态。
According to the deformation of elastic-plastic theory, the finite element analysis model of metal diaphragm for tank of propulsion system in satellite was established in this paper.
根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。
Three-dimensional rigid-plastic finite elements, elastic finite elements and influential function method for the analysis of deformation of rolls system are combined.
它耦合了三维刚塑性有限元法，弹性有限元法和计算辊系变形的影响函数方法。
The finite element analysis of the wheel rail contact shows that the maximum stress under the subsurface exceeds first yield strength, which leads to plastic deformation.
在对轮-轨系统进行有限元分析的基础上，研究了轨道的受力情况和摩擦系数对应力分布的影响，讨论了轨道的弹塑变形和安定极限。
In this paper, an edge-cutting AIA method is presented based on elastic-plastic large deformation finite element simulation theory.
针对板材三维冲压成形的切边回弹问题，提出了基于大变形弹塑性有限元数值模拟理论的切边处理AIA方法。
Slope of destruction often associated with large displacement and plastic strain, therefore, the traditional small-deformation finite element method is no doubt big error.
边坡的破坏往往伴随着很大的位移和塑性应变，因此，采用传统的小变形有限元方法计算无疑误差较大。
A whole process of finite elastic-plastic deformation is divided into many sub-processes of small elastic-plastic deformation.
一个有限弹塑性变形过程被分解成许多小变形子过程。
Based on the theory of elastic-plastic deformation, according to the finite element method, this paper presents a nonlinear analysis of the distribution of the soil pressure of the ditch conduit.
表明对大型沟埋式管道的上压力，采用弹塑性理论的非线性分析是比较符合实际的，其结果可供设计参考。
The proposed criterion is used to evaluate plastic loads in pressure vessel design by analysis using elastic-plastic finite element analysis to guard gross plastic deformation of pressure vessel.
通过接触单元来数值模拟啮合齿的接触过程，建立了基于整体有限元分析的齿啮式快开压力容器塑性载荷计算方法。
One of the critical sets of parameters for successful finite element simulation of tube plastic deformation is the material properties.
管材力学性能参数的准确性是影响管材塑性成形有限元数值模拟质量的关键因素之一。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
应用有限条方法分析多格式斜桥，编制了相应的计算程序，进行有机玻璃模型试验，讨论了这种结构受力性能。
The effect of inner corner radius on the plastic deformation behavior in equal channel angular pressing was investigated using finite element method.
运用有限元模拟的方法研究了内角半径在等径角挤压过程中的作用。
The cross wedge rolling deformation process of shaft parts with eccentric section was simulated with three-dimension finite element soft LS-DYNA by using elastic-plastic finite element method.
利用三维弹塑性有限元软件L S- DY NA对一种典型偏心轴类零件楔横轧成形进行了数值模拟，分析了其成形过程、应力应变场分布及工艺特点。
On the basis of this, the plastic deformation of large-scale cylinder pieces under reaming process and its main influencing factors were analyzed using finite element simulation means.
在此基础上，应用数值模拟方法研究了圆筒锻件扩孔过程的塑性变形及其主要影响因素。
On the basis of this, the plastic deformation of large-scale cylinder pieces under reaming process and its main influencing factors were analyzed using finite element simulation means.
在此基础上，应用数值模拟方法研究了圆筒锻件扩孔过程的塑性变形及其主要影响因素。
应用推荐