The finite element technique is the key technique of the computer assistance engineering analysis (CAE).
有限元技术是计算机辅助工程分析(CAE)的关键技术。
The pacer summarizes the numerical simulation of crash for helicopters using nonlinear finite element technique.
本文概述用非线性有限元技术对直升机结构的坠毁过程进行数值模拟。
The numerical value of electrostatic field for high voltage electro nodes is simulated by the finite element technique.
高压电极静电场的数值模拟，采用有限单元法，利用ANSYS电磁场分析的波前法求解。
A method is proposed to simulate the fatigue crack growth by finite element technique for corner cracks under cyclic tension loading.
给出了一种利用有限元技术模拟周期性张力载荷作用下孔边角裂纹扩展过程的方法。
Finite Element Technique based on Rayleigh-Ritz idea is used to solve wave propagation in non-homogeneous medium with variable velocities.
为求解变速不均匀介质中波的传播问题，使用了利用瑞雷-里兹法的有限元技术。
Using the 3-D homogenization method and the finite element technique, we evaluate the effective elastic constants of the 3-D honeycomb sandwich panel.
基于三维均匀化方法并结合有限元技术，计算三维蜂窝夹层板的等效弹性常数。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
A local transmitting boundary is combined with a lumped-mass finite element technique to form a mechanical model simulating the near field steady wave motion.
本文将局部透射边界和集中质量有限元技术结合起来形成一个模拟稳态近场波动的力学模型。
The hierachical finite element technique has been applied in the time domain and a step-by-step integration method with high accuracy has been developed in this paper.
本文把升阶谱技术应用于时间域，建立了一种高精度的逐步积分法。
In this paper, a discrete local transmitting boundary is combined with a lumped-mass finite element technique for simulating steady wave motion in the viscoelastic layered medium.
本文将离散的局部透射边界与集中质量有限元方法相结合，用于模拟粘弹性成层介质中的稳态波动。
The results showed that this technique could significantly save CPU time and data preparations in the condition of having a similar accuracy compared with the finite element method.
计算表明，这种计算方法与有限元相比，在保证具有相似精度的条件下能够节省CPU时间和数据处理工作量。
The paper describes a finite element simulation technique of the crack growth process in the homogeneous or inhomogeneous solids.
讨论了材料断裂过程的有限元模拟技术。
The technique facilitates the modeling of multilayered passive circuits using the hybrid mode matching and finite element method (MM/FEM).
这里采用了模式分析和有限元相混合的方法来分析多层无源电路。
The solidification process of liquid metal in the CASTEX technique was studied by FEM (finite element method).
利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
A new modeling technique was developed to overcome the difficulties and deficiencies in available finite element modeling process for complicated gears.
针对复杂齿轮现有有限元建模过程中的诸多困难和不足，提出一种新的建模方法。
The strength and rigidity of bus body are analyzed, with finite element method and the finite element modeling is validated using the electric measure technique.
用有限元法对半承载式客车车身强度、刚度进行了分析，用电测量技术对有限元模型进行了验证。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
The repaired honeycomb structures are calculated, and the influence of glue's parameters is discussed by the finite element model and program stated above, the technique of its repair is studied.
建立了蜂窝夹芯结构的脱胶修补计算模型，分析了胶膜参数对剩余强度的影响，初步研究了其修补技术；
Furthermore, we discuss SPR technique and finite element correction, we proved some results of SPR technique and obtained global ultraconvergence by correction.
在此基础上，我们继续讨论了超收敛单元片应力恢复（SPR）技巧与有限元校正的问题。
Technique of finite element method is the important base of theory and powerful tool in mechanical dynamic design.
有限元技术则是机械产品动态设计和动态分析的重要理论基础和强有力的工具。
The Scaled Boundary Finite-Element Method (SBFEM) is a novel semi-analytical technique.
比例边界有限元法（SBFEM）是一种半解析数值分析的新方法。
The parallel finite element method using domain decomposition technique is adopted to the distributed parallel environment of workstation cluster.
将采用区域分解技术的并行有限元方法应用于工作站机群的分布式并行环境。
Remote field eddy current technique combined with computer technique and finite element analysis was used to examine the inservice ferromagnetic heat exchanger tubing.
远场涡流技术结合计算机技术和有限元分析方法，解决了在役铁磁性材料换热器管检验的问题。
This paper deals with a field modulated magnetic gear and its calculation with the finite element method, and provides a powerful numerical technique for designing magnetic gears.
在电机设计时，使用有限元方法对一种大力矩磁力齿轮——磁场调制式磁力齿轮进行了磁场计算，为设计该磁力齿轮提供了有力的工具。
The simulation results show the validity of employed finite element method and it can provide theoretical instruction for aluminum extrusion die design and technique parameters selection.
模拟结果表明所用有限体积法是有效的，可以为铝型材挤压的模具设计与工艺参数的选择提供理论指导。
Essentially, the finite element method is a numerical technique for the variational problems, which is a general approach to physical problems.
有限元法实质上是变分问题的一种数值解法，是物理问题的通用计算方法。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
When using this technique in the finite element simulation of rectangular solid upsetting, the hexahedron remeshing problems are solved well.
将该技术应用于矩形块体镦粗过程的有限元模拟中，较好地解决了六面体网格重划问题。
When using this technique in the finite element simulation of rectangular solid upsetting, the hexahedron remeshing problems are solved well.
将该技术应用于矩形块体镦粗过程的有限元模拟中，较好地解决了六面体网格重划问题。
应用推荐