A new model of flow in a twin rotor continuous mixer was analyzed with the finite element software ANSYS.
文中利用有限元软件ANSYS对S形转子连续混炼机的流场进行了模拟分析。
The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.
该研究使用ANSYS有限元软件的热分析模块进行变速箱热传导分析计算。
Therefore, it is feasible to simulate the force state of slide-resistant pile with finite element software ANSYS.
因此,用ANSYS有限元软件模拟抗滑桩的受力状态是可行的。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.
文章利用ANSYS有限元分析软件,对螺旋布孔射孔套管的承载能力进行了分析。
The bend shapes of rail during cooling at air after hot rolling were simulated using the finite element software ANSYS.
应用有限元软件A NSYS模拟了热轧钢轨空冷过程的弯曲变形规律。
Finally, the modal analysis is obtained and the resonance frequency is determined by using finite element software ANSYS.
再用有限元软件ANSYS进行模态分析,确定了共振频率。
Secondly, the model of deck pavement is analyzed by finite element software ANSYS to get its stress and strain distribution.
其次,本文使用ANSYS通用有限元策略对桥面铺装模型进行浅析浅析并得出它们的应力应变分布。
After the formulation of appropriate criteria takes place the optimization of the system with the Finite Element Software ANSYS.
在列出相应的准则公式后,采用有限元程序ANSYS将系统进行优化。
To solve this question, finite element software ANSYS is utilized to analysis the mode of steel concrete beam and bridge in this text.
本文针对这一问题,利用有限元软件ANSYS对钢筋混凝土梁桥进行模态分析。
The paper checks the safety and stability of shoulder pole girder for hoisting large dynamotor stator with finite element software ANSYS.
利用大型通用有限元分析软件ANSY,对国泰电厂大型发电机定子吊装用横梁结构进行设计方案的安全稳定性校验。
The general finite element software ANSYS, which is widely used in the civil engineering fields, is inconvenient to the concrete projects.
通用有限元软件ANSYS广泛应用于土木工程结构中,但对于具体工程分析使用不方便。
The stress and temperature distribution were computed by the finite element software ANSYS for the two instances of steady operation and starting-up.
通过有限元软件A NSYS,分别计算了启动和稳态操作情况下, 加氢反应器筒体的温度分布和应力分布。
Based on secondary development technology, the large universal finite element software ANSYS could remedy its inadequate specialization with APDL language.
大型通用有限元软件ANSYS可以利用APDL语言,通过二次开发技术,弥补本身专业化不足的缺陷。
Reinforced concrete column subjected to fire was analyzed with three dimensional temperature by using finite element software ANSYS, and was Tested in lab.
利用有限元软件ANSYS对高温后钢筋混凝土柱作三维温度场的非线性分析,并对钢筋混凝土柱进行了实验室高温试验。
A numerical simulation program for flexural load effects of rc beams was compiled based on the theory of reinforced concrete and finite element software ANSYS.
根据钢筋混凝土理论和ANSYS有限元软件编制了实验梁受弯荷载效应模拟计算程序。
To verify the results, a 2D finite-element model of the bridge is developed and its modal parameters are calculated by using the finite element software ANSYS.
为了验证测试结果,文中对大桥用二维有限元模型建模,用有限元软件ANSYS建立了该桥的二维有限元模型,并计算得到了桥的模态参数。
Using finite element software ANSYS command flow and parametric design language (APDL) to establish standard involute cylindrical bevel wheel of 3d model of meshing.
我们帮您人工翻译,但要付费,有意加我扣扣。利用有限元软件ANSYS的命令流和参数化设计语言(APDL)建立渐开线标准斜齿圆柱齿轮啮合对的三维模型。
Furthermore, the method to analyze the damage of lining structure by current finite element software ANSYS is also valuable to other concrete structure and components.
文中论述的利用通用有限元软件ANSYS实现衬砌结构损伤分析的方法,对其它混凝土结构和构件的损伤分析也具有参考价值。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型,借助于大型有限元分析软件ANSYS进行了数值模拟。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
首先利用平面框架结构的模型实验,借助有限元软件ANSYS,利用模态分析结果,实现了基于有限元理论的传感器优化布置。
The thermal analysis, thermal-structure coupling analysis and transient thermal analysis are applied in nine common materials by using the finite element software ANSYS.
应用有限元软件ANSYS对常用九种材料进行了热稳定性和抗振性分析。
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS.
采用ANSYS有限元程序对两边连接钢板剪力墙进行数值模拟分析。
This paper uses large-scale finite element software ANSYS to make finite element analysis, receives dynamic characteristics and seismic response of the Mega-frame structure.
本文采用大型有限元软件ANSYS,对巨型框架结构进行有限元分析,得到结构体系的动力特性和地震响应。
A comprehension simulation to the three dimensional flow field and temperature field in the mould of slab continuous casting was performed with finite element software ANSYS.
利用有限元软件A NSYS模拟计算板坯结晶器内三维流场和温度场。
Because hinges need linear deformation, using the finite element software ANSYS to study the performance of the hinges, then discusses the hinges parameters' impact on linearity.
因为铰链需要线性变形,因此利用有限元分析软件ANSYS对柔性铰链进行系统的研究,讨论铰链的各个参数对其线性性能的影响。
The topology optimization design module of the commercial finite element software ANSYS was used to the bicycle frame and multiple arch bridge for the topology optimization design.
通过采用商用有限元软件ANSYS中的拓扑优化设计模块对自行车车架和多拱拱桥进行了拓扑优化设计,优化结果表明所得拓扑结构清晰,并与实际的自行车车架和多拱拱桥非常相似。
For comparison, the finite element software ANSYS is used for the discharge and stress calculation of pulsed magnets. The result obtained from ANSYS agrees well with that from PMDS.
利用ansys计算脉冲强磁体的放电过程和应力分布,并把计算结果与PMDS的结果相比较,发现二者结果吻合很好。
For comparison, the finite element software ANSYS is used for the discharge and stress calculation of pulsed magnets. The result obtained from ANSYS agrees well with that from PMDS.
利用ansys计算脉冲强磁体的放电过程和应力分布,并把计算结果与PMDS的结果相比较,发现二者结果吻合很好。
应用推荐