The static and dynamic characteristics of a weather radar tower are analyzed by using the commercial finite element program ANSYS.
运用通用有限元程序ANSYS对某天气雷达站塔楼结构的静、动力特性进行了分析。
Nonlinear finite element models by incorporating geometric and material nonlinearities were developed using finite element program ANSYS.
首先利用ANSYS程序建立了构件的非线性有限元模型，模型中包含了几何和材料双重非线性。
The overall stability tests of monosymmetric I-shaped overhanging beams and two-span continuous beams are simulated by finite element program ANSYS.
利用ANSYS有限元程序对单轴对称工字形单伸臂梁和双跨连续梁整体稳定试验进行了有限元模拟。
The equivalent age method is extended successfully to the concrete cracking control in structures through the use of the finite element program ANSYS.
与有限元软件一起使用，等效龄期方法还可以运用于混凝土结构的温度裂缝预测与控制中；
Using general finite element program ANSYS, we simulate a dynamical evolution process of the lithosphere of west Liaoning, northeast China in the late Mesozoic.
利用大型通用有限元分析软件ANSYS简单模拟辽西地区中生代末期岩石圈动力学演化过程。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
One real skew arch bridge is investigated using the finite element program ANSYS so as to study the generic phenomenon of bridge damage, especially the regular cracks.
本文以某斜交拱桥为研究对象，阐述其病害的一般现象，尤其是规则性裂缝。
According to the actual condition of high-cutting slope of Wushan-Wuxi Road K95 section, general-purpose finite element program ANSYS is used to simulate excavation process.
根据两巫公路K 95段高切坡的实际情况，运用ANSYS软件对其开挖过程进行了模拟。
According to consideration of restriction and creep deform in mass concrete, the temperature field and thermal stress are simulated through the finite element program ANSYS.
并考虑混凝土的内外约束及混凝土的徐变变形，用有限元法求解混凝土不利面的温度应力，并用大型有限元软件ANSYS对温度场和应力场进行了模拟。
A simulative calculation was conducted of the natural frequencies of the frame towers using large-scale finite element program ANSYS, and the calculated value was compared with the test value.
利用大型有限单元程序ANSYS对框架塔的自振频率进行了模拟计算，并将计算值与试验值进行了对比。
By means of the finite element program ANSYS and using orthogonal design method, the parameters having effect on the stability of this structure were analyzed and primary factors were obtained.
本文利用ANSYS有限元程序通过正交设计的方法对格构式斜腿刚架进行了平面外整体稳定承载力参数分析，得到显著影响因素。
Connecting the strength reduction of finite element method, the paper used the new criterion to analyze slope stability problems by importing it into ANSYS program.
本文将新准则引入到大型通用有限元程序ANSYS中，并与强度折减系数法相结合用于分析岩土工程中的边坡稳定问题。
The finite element analysis of the bridge-erecting machine 'beam under welding defect conditions is conducted with ANSYS program, which provides a basis for the structural safety assessment of beam.
以A NSYS为分析工具，对铁路架桥机导梁焊接缺陷进行有限元分析，为导梁进行结构安全评定提供依据。
This paper discusses the analysis on forces and determination of installation dimensions of main structural parts of the suspension pipe bridge by means of finite element analysis program ANSYS.
文章对在悬索式管桥体系中应用ANSYS程序有限元结构分析方法，分析管桥主要构件的受力情况并确定安装尺寸方面进行了探讨。
Partial buckling of hoist boom is analyzed with ANSYS finite element program.
采用ANSYS有限元程序分析起重臂的局部屈曲。
The finite element analysis model to the U shape bellows is presented and calculated by the ANSYS program under diverse loads for in plane instability.
建立了U形无加强波纹管结构分析的有限元分析模型，采用ANSYS有限元软件对其在不同平面失稳工况下的应力响应进行了计算。
A numerical simulation program for flexural load effects of rc beams was compiled based on the theory of reinforced concrete and finite element software ANSYS.
根据钢筋混凝土理论和ANSYS有限元软件编制了实验梁受弯荷载效应模拟计算程序。
Based on the theory of the unsteady temperature field and stress field, three-dimensional finite element model is set up. The wall is analyzed by program of ANSYS finite element analysis.
本文根据瞬态温度场和应力场理论，建立地下室混凝土墙体的三维有限元分析模型，利用有限元分析程序ANSYS对基本工况下的墙体进行分析。
The simulated wind vibration loads are then applied to the time-history analysis of wind vibration response of single-layer spherical latticed shells by the finite-element program ANSYS.
将模拟出的风荷载作用于单层球面网壳，用有限元程序ANSYS进行了网壳结构的风振响应时程分析。
To get numerical results, the general finite element program-ANSYS was employed to simulate model.
然后采用通用的有限元程序ANSYS模拟模型得到其数值解。
Building nonlinear finite element models using ANSYS program, And in the light of previous experimental to verify the correctness in the article.
本文利用ANSYS程序建立了非线性的有限元模型，并参照前人试验验证模型分析程序的正确性。
Then, according to the factual characteristic of the finite element Analysis software ANSYS and ABAQUS, an interface program of finite element model transformation is compiled.
并针对有限元分析软件ANSYS与ABAQUS的实际特点，编写了有限元模型转换接口程序，用实例验证了所编接口转换程序的可行性与正确性。
The transient temperature and stress field during starting of a turbine first stage disc's 3-dimensional model has been calculated by using the general finite element calculation program ANSYS.
用通用有限元计算程序ANSYS对某燃气轮机启动过程中透平第一级涡轮盘的三维模型瞬态温度和应力场进行计算。
In this paper, the global finite element model of yongle bell and its supporting system are established for the first time by using ANSYS program.
本文首次采用ANSYS有限元分析软件对永乐大钟及其悬挂支撑系统建立了整体的有限元模型，进行了静力学分析及整体强度校核。
In this paper, the global finite element model of yongle bell and its supporting system are established for the first time by using ANSYS program.
本文首次采用ANSYS有限元分析软件对永乐大钟及其悬挂支撑系统建立了整体的有限元模型，进行了静力学分析及整体强度校核。
应用推荐