Comparative analysis of the results come from finite element program calculation and "code of reinforced concrete silo design" is carried out.
对有限元程序计算结果与钢筋混凝土筒仓设计规范方法计算结果进行了对比分析。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
Program design: to work out a utility analysis Program is the absolutely necessarily tache of finite element analysis, and also is this discourse's finally aim.
程序编制：编制出实用的分析程序是有限元分析课题必不可少的环节，也是本文的最终目的。
All along, the Bucket, circular stacker-reclaimer FEM analysis, are used to design the program first, then design the finite element calculation device model based on the program.
一直以来，对于斗轮机、圆形堆取料机等大型钢结构的有限元分析，都采用先有设计方案，再在已有设计方案的基础上，建立设备的有限元计算模型进行分析计算。
By analysing the process of hydraulic nail making machine, we find out which part under the biggest force and use UG do finite element analysis, then we promote improvement program.
通过分析液压制钉机的工作过程，找出机体中受力最大的部位，然后运用UG软件对它进行有限元分析，并提出改进方案。
Abstract: the method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
文摘：研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法，并实现了计算程序。
Finite element analysis program was used to calculate the stress of 300mw turbine rotor in straightening the axle, and the effect of each factor is analyzed combined with the trial result.
应用有限元分析程序对300MW汽轮机转子直轴进行了应力计算，并对各影响因素进行了分析，结果表明退火处理过程中残余应力产生的塑性变形量不可忽略。
This paper discusses the analysis on forces and determination of installation dimensions of main structural parts of the suspension pipe bridge by means of finite element analysis program ANSYS.
文章对在悬索式管桥体系中应用ANSYS程序有限元结构分析方法，分析管桥主要构件的受力情况并确定安装尺寸方面进行了探讨。
Based on continuum theory, the vibration of pipeline in LPG filling stations has been analyzed by using the finite element program (SAP5) of structure analysis.
应用连续体振动理论和SAP5结构分析有限元程序，分析了液化石油气充瓶站管线振动问题。
By using finite element analysis program, the models for computation of stiffness parameters of a specific structure with a fixed joint surface are developed.
对一个包含固定结合面的具体结构，利用有限元分析程序计算了结合面刚度参数和结合面位置对结构模态的影响。
The main function of this program is to establish connection with optimization design and finite element analysis programs.
本程序的主要功能是实现与优化设计、有限元分析程序的联接，是一个较为实用的软件。
Porous fluid pressure are also presented by using permeable mechanics method. Finite element model and stress analysis program are developed.
用有限元方法进行应力分析及设计保持井眼稳定的泥浆密度。
The theory and method of finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
研究了基于形变理论的金属板料成形有限元分析的理论和方法，并实现了计算程序。
MCSAP program was applied to the finite element analysis for the stress and deformation of a high-speed Gleason spiral bevel gear under centrifugal load.
使用修改移植的MCSAP有限元分析程序对某高速弧齿锥齿轮进行了离心载荷下的变形和应力的分析。
Concrete example is given and the dynamic analysis program of fuzzy stochastic finite element is programmed to test and verify the feasibility of the paper's view and method.
给出了具体的算例，同时编制了模糊随机机构动力分析的有限元程序，验证了本文的观点和方法是可行的。
Applying the theory of structural finite element method, the corresponding structural analysis program system is developed.
结合结构有限元的理论，研制了相应的结构分析程序系统。
The finite element analysis of the bridge-erecting machine 'beam under welding defect conditions is conducted with ANSYS program, which provides a basis for the structural safety assessment of beam.
以A NSYS为分析工具，对铁路架桥机导梁焊接缺陷进行有限元分析，为导梁进行结构安全评定提供依据。
The secondary stresses of typical planar steel frames due to the rigidity of panel points are calculated by the finite element analysis program.
应用有限元分析软件，对两种跨度下典型平面钢屋架节点刚性所产生的次应力进行了分析计算。
It is based on the relaxation integral constitutive relation to give the finite element control equation and analysis program for laminated composite plates.
以粘弹性材料松弛型积分本构关系为基础，给出了复合材料层合板的有限元控制方程及相应的有限元分析程序。
This paper introduces a numerical analysis of semi-conductor devices by using the finite-element method combining with the coupled approach and the design of a corresponding modelling program.
本文采用有限元分析与耦合法相结合的方法对半导体器件进行数值分析，设计了相应的模拟程序；
A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented.
使用基于扰动应力场模型的非线性有限元程序VT2分析了4个深受弯简支梁的受力性能。
Based on the theory of the unsteady temperature field and stress field, three-dimensional finite element model is set up. The wall is analyzed by program of ANSYS finite element analysis.
本文根据瞬态温度场和应力场理论，建立地下室混凝土墙体的三维有限元分析模型，利用有限元分析程序ANSYS对基本工况下的墙体进行分析。
Based on the theoretical analysis, the finite element analysis program is developed and examined through the analysis of a fixed beam.
在理论分析的基础上，编制了有限元程序，并对固支梁进行了验算。
A finite element program designed for the stress analysis of ribbed shells is presented.
我们编制了用于肋壳结构分析的有限元程序。
The program of non-linear concrete structure finite element analysis is worked out, by which the computed results strongly depend on the analyst's choice of finite element size were studied.
并建立了混凝土非线性损伤本构模型，在此基础上编制了混凝土结构非线性有限元程序。
The simulated wind vibration loads are then applied to the time-history analysis of wind vibration response of single-layer spherical latticed shells by the finite-element program ANSYS.
将模拟出的风荷载作用于单层球面网壳，用有限元程序ANSYS进行了网壳结构的风振响应时程分析。
Finite element dynamic analysis and experimental modal analysis have been carried out utilizing the large structure analysing program SAP5P for a certain motor vehicle frame.
应用大型结构分析软件SAP5P，对某车架进行了有限元动态分析和实验模态分析。
Finite element dynamic analysis and experimental modal analysis have been carried out utilizing the large structure analysing program SAP5P for a certain motor vehicle frame.
应用大型结构分析软件SAP5P，对某车架进行了有限元动态分析和实验模态分析。
应用推荐